Can Larger 3,500 lb Brake Rotor Be Used As Replacement On Trailer
Updated 12/27/2023 | Published 12/23/2023
Products Featured in This Question
Question:
I bought a brake hub kit today from you all and it measures 10 3/16 and the one that came off measures 9 3/4 will this still work on my trailer
asked by: Dustin B
Expert Reply:
Although both of those fall under a 10" hub and rotor assembly, it sounds like you do not have DeeMaxx on there right now. In general the disc brake parts cannot be interchanged. The # DE49VR you got has a 10-3/16" diameter, Kodiak # KHR10D sits at 10", and then there is Dexter # K08-435-05 which matches your 9-3/4" measurement. Seems like you have Dexter on there right now so you would want to stick with Dexter replacement parts assuming that is correct. The other option would be to swap out the kit entirely with # DE66YR.
Product Page this Question was Asked From
DeeMaxx 10" Hub/Rotor Assembly - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Rotor
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- DeeMaxx
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer hubs and drums
- Search Results: trailer tires and wheels
- Search Results: timken trailer bearings races seals caps
- Search Results: h~1377
- Shop: DeeMaxx 10" Hub/Rotor Assembly - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Video: All About the Grease Seal
- Video: What to Know About the Grease Seal
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: hub and rotor
- Search Results: 10k trailer jack
- Search Results: trailer wiring
- Q&A: Replacing Broken Oil Seal Springs 168255TC
- Q&A: Grease Seal Recommendation for Inner Diameter 1.69 and Outer Diameter 2.31 inch
- Q&A: Are The DeeMaxx Hub/Rotor Assemblies Compatible With Kodiak 225 Calipers?
- Q&A: Replacement Hubs Based on Tapered Spindle Measurements
- Q&A: Oil Seal With 1.68 Outer Diameter And 2.56 Hub Inside Diameter
- Q&A: Recommended Seal for a 1.68" Spindle
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs