How to Find Correct Replacement Hubs for Shorelandr Boat Trailer

Products Featured in This Question

Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased

(1353)

$42.06

Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles

(2378)

$6.68

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized

(472)

$52.56

Replacement Trailer Hub Bearing - L44649

(1962)

$16.61

Replacement Trailer Hub Bearing - L68149

(1959)

$14.41

Question:

Im looking for trailer hubs for my Shorelandr trailer. Do you sell replacement parts for this type of trailer. Please, any help would be great Thank you,

asked by: Bill

Expert Reply:

In order to find the correct replacement hubs for your Shoreland'r boat trailer, you need to first know what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper and measure your spindle to the thousandths of an inch where the bearings and grease seal ride. You can use the photo I've attached to see exactly where you need to measure.

Additionally, you need to know your hub's wheel bolt pattern; if you do not know what it is I have added a help article which details how you can find it. Finally, you also need to know the weight rating of your axle to determine the correct hub.

For example, idler hub assembly # AKIHUB-545-35-G-K is for a 3,500 lb axle and has bearings # L68149 and # L44649 with grease seal # 58846.

If you let me know what your bearing numbers, wheel bolt pattern and axle rating are I would be able to find a compatible hub for you.

expert reply by: Kyle S

click to enlarge

Karen H.

5/21/2020

I have a 70's vintage shore lander boat trailer. I need dust caps for the hubs they appear to have a narrow inside rim. Any caps I have found do not fit flush into the hub. the original dust caps are squat in appearance. I would appreciate hearing from anyone who knows anything about these caps. Thanks

Chris R.

5/25/2020

We might have the right replacement caps for you, but in order to verify the correct size, I will need the existing cap's dimension. You can either measure the cap itself or the hub bore (where the cap fits) diameter using a digital caliper. If you can tell me this dimension I will be happy to make a recommendation.

Jim

7/23/2020

LM67048 bearing on shore lander. Will this tell me what axel I need?

Chris R.

7/28/2020

That's definitely something you need to know but you'll also want to determine the other bearing number as well. There will be both an inner and outer bearing on the spindle - check the numbers stamped onto the inside of both and that should be enough to verify a compatible replacement hub.

Lee

7/23/2020

Hi, I am looking for a galvanized 5 spoke/punchouts, 5 lug spare tire and wheel rim assembly (Shorelandr part number 4300313) that matches the other tires on my aluminum Shorelandr boat trailer. The tire is a Carlisle Sport Trail LH ST215/75D14 LRC and my wheel rim specs match the specs for Carlisle part number 1421137400B except I have 5 punchouts and the 1421137400B has 8 punchouts. Do you sell this tire and wheel rim assembly for my boat trailer, and if so, how can I order it from you?

Chris R.

7/28/2020

I'm not sure we have that exact style wheel available. Just in case there's something else that might work as a replacement though, I've linked our entire 14" wheel selection below that you can look through.

Helpful Links

dept-pg-trailer_tires_and_wheels-sf-wheel_only-sz-5_on_4~1%7c2_inch-pc-14_inch.aspx