Adarac Pro Ladder Rack Compatibility with BAKFlip Hard Folding Tonneau Cover

Question

Question:

Looking to get a Adarac Pro with one of the BAKflip hard folding tonneau for my 2015 F250 Crew Cab with 6 3/4 bed. It looks like they will work together fine. Can you confirm?

asked by: Tim P

0

Expert Reply:

For your 2015 Ford F-250, the BAKFlip folding hard tonneau covers will work well and there are 4 options to choose from. There is the BAKFlip G2 Hard Tonneau Cover # BAK26310, FiberMax # BAK126310, F1 # BAK72310, or MX4 # BAK48310. Each of these options are confirmed to fit your truck and each is also compatible with the Adarac Pro Series Custom Truck Bed Ladder Rack # A4000955.

The tonneau covers will utilize interior bed rails and the ladder rack will utilize the stake pocket holes, so they will work very well together.

expert reply by: Jason S

0

Jodi B.

8/10/2020

Looking to get a truck rack that does NOT have to be drilled into the bedrail. Currently have a Bakflip F1 tonneau cover installed on my 2017 Ram 1500 Laramie (5'7" bed). Any recommendations?

Reply

Jon G.

8/20/2020

I have 2 different options that you can check out, but you will only be able to install a ladder rack if your 2017 Ram 1500 does NOT have the RamBox. For your application we have the Adarac Pro Series # A4000965 and the Thule TracRac SR # TH43003XT-784. Overall I like the TracRac SR more but part of the buying decision comes down to price and weight capacity so that decision will be up to you. Neither of these ladder racks require drilling.

Reply

Answer 1

It looks like you have the BAKFlip MX4 for the 2013 Ford F-350 short bed, part #BAK48310. This tonneau cover does install inside the bed rails, so using the Thule TracRac SR Sliding Truck Bed Ladder Rack that is compatible with your truck, part…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

Hey Craig, it sounds like you are asking if the Andersen Ultimate Connection part #AN67VR can be used in the bed of your 2025 GMC Sierra short bed that has the OEM rail kit. If so, yes it can but you will need to use the pop in ball adapter part…

view full answer...

Answer 6

Good morning, Ron! The Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AN67VR is compatible with your factory gooseneck hitch ball just as it is. The Adapter #AN27VR you're looking at just gives you a better connection than the…

view full answer...

Answer 7

Hey Steve, The B&W Patriot #BWRVK3255 you have would require base rails or a gooseneck hitch and an adapter in order to mount to the bed of the F-250. If you want to go with base rails then I recommend the B&W Custom Installation Kit w/ Base…

view full answer...

Answer 8

Hello Jeremy, I sent that number over to lippert and they were not able to find anything. Can you please send me a picture of the sticker if it is still on there? Should have a S/N number and and RPO number, I included a picture of what the stickers…

view full answer...

Adarac Pro Ladder Rack Compatibility with BAKFlip Hard Folding Tonneau Cover

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching