Customers compare BAK72331 to these similar products
Products Featured in this Video
Speaker 1: Today we're going to be taking a look at the BAKFlip F1 line of hard tonneau covers. Here's what our F1 tonneau cover's going to look like installed. As you can see, it has a really, really nice look to it, very heavy duty construction and low profile. The main need for a tonneau cover usually is a security or a protection kind of situation, either, like in our case today we've… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The BAKFlip F1 Hard Tonneau Cover #BAK72331 can easily be fully removed by removing the 6 clamps which hold the side rails on to the bed rails on your 2022 Ford F-350 long bed. This will allow you to remove the entire cover with the side rails as a…
view full answer...The problem that you would run into with a folding cover such as #BAK72331 is if you leave it on but folded up flat it will be several inches above the truck bed sides. This means that when making tight turns the trailer's pin box could make…
view full answer...It sounds like you either have a bad ground on your truck/trailer or your brake controller is having issues. Try checking all of your grounds on your trailer and your vehicle that have to do with the brakes making sure they are all secure and that…
view full answer...The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…
view full answer...There is a retractable tonneau cover for your 2020 Ram 2500 with a 6-1/2 foot bed, Ram Box and Cargo Management System that will allow you to keep the rails on your truck and not have to remove them. The rails will be used as a way to install the…
view full answer...According to the instructions which I have linked for you for Air Lift suspension enhancement #AL60769, the maximum air pressure is 35 psi and the minimum is 5 psi. Over-inflation and under-inflation can damage the air bags so you will always want to…
view full answer...For your 2004 Chevrolet Avalanche 4x4, I recommend the Air Lift AirLift 1000 Air Helper Springs for Coil Springs - Rear, #AL60769. These air springs are a confirmed fit for your vehicle. The springs fit inside your rear coil springs to add support…
view full answer...In regards to the BAKFlip G2 Hard Tonneau Cover part #BAK59AV for a 2023 Toyota Tundra with 5-1/2' bed, the panels while folded won't block the third brake light so you will indeed still have visibility through the rear camera.
view full answer...You can get a sense for how much visibility you'll have on your 5th wheel hitch with a tonneau cover folded up near the cab by viewing the linked image. The BAKFlip MX4 Hard Tonneau Cover #BAK48204 that fits your 2018 Ram 3500 long bed will be…
view full answer...The Adarac Pro Series Custom Truck Bed Ladder Rack #A69FR is what you want for your 2018 Ram 2500 with the 8' bed. This is compatible with your BAKFlip cover whether you have the F1 #BAK72204, G2 #BAK26204, or the MX4 #BAK48204. I also recommend…
view full answer...With your 2021 Ram 2500 having the 6-1/2' bed you will need the BAKFlip MX4 Hard Tonneau Cover #BAK48203. This is for the regular bed and is not compatible with the Ram Box. The BAKBox 2 Collapsible Truck Bed Toolbox #BAK92201 you found is the…
view full answer...The correct Pace Edwards Switchblade Retractable Hard Tonneau Cover (Aluminum and Vinyl) for a 2016 Ram 3500 with 8' bed is part #311-SWD7936.
view full answer...