Can a Hole Be Cut in the Middle of the Techliner Bed Liner for Use with Gooseneck Hitch

Question

Question:

Is there a work around for using a weathertech techliner bed mat if I have a gooseneck hitch in my truck? How would cutting a hole in it affect its performance?

asked by: Trey

0

Expert Reply:

In order to use the Techliner Bed Liner in a truck with a gooseneck hitch installed you will need to cut a hole in the mat where it sits over the hitch ball. I recommend using a hole saw to make this cut. This can absolutely be done and will not affect the performance of the liner. If you can tell me the year, make, model, and bed size of your truck I would be happy to make sure you get the correct mat.

expert reply by: Conner L

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

We have a couple of 4-step scissor stairs you could use. We have a steel model, #SS04, and an aluminum model, #AS04, and both are 18 inches wide. These stairs mount using an included bracket that looks like #AS2002. So they do not pin into place.…

view full answer...

Answer 4

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…

view full answer...

Answer 5

Since yo have a ducted Coleman setup currently the best option is the Furrion Chill unit part #FR42PV which was designed for your exact setup so it would be an easy install using same controls. This is also the quietest and coldest blowing unit we…

view full answer...

Answer 6

Hello Dave, Great question. Unfortunately, you cannot use a RockerBall with a Reese Goose Box because the Goose Box requires a fixed gooseneck ball, while the RockerBall has a built-in pivot mechanism that could cause instability. The Goose Box…

view full answer...

Answer 7

Good morning, Ron! The Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AN67VR is compatible with your factory gooseneck hitch ball just as it is. The Adapter #AN27VR you're looking at just gives you a better connection than the…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Hello Nick, The Hitch ball for the Curt #C60642 will sit above or slightly forward of the rear truck axle. I attached 2 pictures of the underbody of the 2022 GMC Sierra, as you can see that the Curt #C60642 sits in the same spot as the B&W…

view full answer...

Answer 10

Congrats on the new truck! The Curt RockerBall Multi-Fit Ball Kit item #C78ZV will work great with the puck system in your new 2025 Sierra 2500. It's been specifically designed to work with all the OEM puck systems so the difference in…

view full answer...

Answer 11

If you were to use the 4 inch offset ball #BWGNXA4085 the pin weight on the ball will not be changed. What will change is where the weight is carried on the truck. Using the offset ball will put more weight 4 inches back from the center of the…

view full answer...

Answer 12

The factory prep package on a 2018 Ram 3500 is pretty apparent so odds are you don't have this if you are unsure. If the indentations for the four outer pucks and center gooseneck hitch ball are present but there are no actual holes in the truck…

view full answer...

Can a Hole Be Cut in the Middle of the Techliner Bed Liner for Use with Gooseneck Hitch

Product Page this Question was Asked From

Continue Researching