Recommendations For Complete Re-Wiring Of 6 X 12 Enclosed Trailer With LED Lights
Updated 07/06/2017 | Published 07/04/2017
Products Featured in This Question
Question:
Want to do a complete rewire. Do you have what i need? Also need to put led wire light on interior, and led bar on outside
asked by: Tom T
Expert Reply:
We do have everything you need to re-wire your 6 X 12 enclosed trailer. We also have any of the lights you said you want to use as well.
For trailer wiring I recommend installing a 7-way so you can operate the light inside the trailer. The 7-way wiring I recommend is the Hopkins # H20046. This harness is an 8-ft long molded 7-way.
I then recommend using a junction box like part # 38656. You would mount this on your trailer and then run your # H20046 wiring into the box. You can then run the wiring like part # H20046 from the junction box for the lights on the trailer. The # DW04914-1 wire is sold by the foot.
For the interior light I recommend the Bargman Double Interior Light # 30-76-243. This light has toggle switches to turn the lights on and off.
If you are planning on replacing all of the lights on the trailer you may be interested in a kit like part # TLL56RK. This kit includes all of the hardware and wiring you need to install the lights on your trailer. Since the # TLL56RK kit does not include clearance lights you might want to check out part # MCL31AB.
I have attached a link to our product page for the LED lights we carry for trailers you can check out.
If you have brakes on your trailer you will need # 10-1-1 wire to run from the brakes to the junction box.
If you have any questions about a specific product just let me know and I will be glad to answer any questions for you.
Product Page this Question was Asked From
Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 7 Blade
- Plug and Lead
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: 35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
- Video: Detailed Breakdown of the 35 Ft 4-Way Trailer Wiring Harness
- Video: All About the 35 Ft 4-Way Trailer Wiring Harness
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Shop: Trailer Wiring Junction Box
- Q&A: What Gauge Wire does 4-Way Trailer Wiring Use
- Q&A: Installation of Trailer Lights with Red, Black, and White Wires to Traditional Trailer Wire Colors
- Shop: LED Clearance or Side Marker Light with Reflector - Submersible - 2 Diodes - Rectangle - Red Lens
- Shop: Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
- Shop: 12 Gauge 7 Conductor Jacketed Wire - Per Foot
- Shop: RV Roof Membrane
- Q&A: How to Determine Correct Replacement Tail Lights
- Article: RV Roof Types: What Type of Roof Does My RV Have?
- Shop: Trailer License Plate Holder with LED Light - 3 Diodes - Clear Lens - White Frame
- Article: Trailer Lighting Requirements
- Q&A: Troubleshooting Blown Vehicle Fuses Every Time Trailer is Connected
- Video: Detailed Breakdown of the Thinline LED Clearance and Side Marker Light
- Video: What to Know About the Optronics LED Trailer Clearance or Side Marker Light w/ Reflector
- Video: Complete Breakdown of the Optronics Thinline LED Trailer Clearance or Side Marker Light
- Video: Alpha Systems 4034 Roof Coating for RV Roofs Feature Review
- Video: All You Need to Know About the Optronics Thinline LED Trailer Clearance or Side Marker Light
- Search Results: trailer body parts
- Search Results: roof corner caps
- Search Results: fiberglass roof cap
- Search Results: pace trailer parts
- Search Results: eternabond
- Search Results: 4 pin flat connector
- Search Results: license plate light
on Trailer Wiring
