Installation Instructions for Reese Dual Cam Weight Distribution System
Updated 03/23/2016 | Published 03/21/2016
Question:
I am waiting for the arrival of a front mount hitch and heavier duty 1200 lb trunnion bars for my Reese WD Dual Cam assembly. My question is this...can you provide me complete installation materials for the WD Dual Cam system. I am removing it from a Rockwood Roo 21SS which is about 1500lbs. lighter than the UltraLite and will be reinstalling it on a Rockwood Signature UltraLite. I am particularly concerned about establishing the correct ball platform angle and the procedure to make sure I get it right. Plus send any other thoughts or advice you might have. Thank you.
asked by: L B
Expert Reply:
Set-up of a Reese dual cam weight distribution system like # RP66083 is shown in the linked video. The complete written instructions are also linked for you.
It is important to know your trailer's fully-loaded road-ready tongue weight (TW) when selecting a system. The spring bars need to be selected based on the actual weight load on them, which consists of the trailer's TW plus the weight of anything in the truck bed that sits behind the rear axle, such as a cooler or generator. You total TW should fall into the middle of the system's operating range.
For example, the Reese # RP66083 trunnion bars, rated for 400- to 800-lbs of TW, are ideally suited to a total TW of 600-650-lbs.
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What Weight Distribution Hitch Should I Get for My Rockwood Mini Lite KS2304 Travel Trailer?
- Search Results: round led lights
- Shop: Replacement Trunnion Spring Bar for Reese Weight Distribution System - 1,500 lbs TW
- Shop: Reese Replacement Weight Distribution Chain Kit
- Shop: Suspension Enhancement
- Search Results: reese dual cam
- Shop: Blue Ox SwayPro Weight Distribution Shank for 2" Hitches - 18" Long - 7 Hole Adjustment
- Shop: Timbren Suspension Enhancement System - Rear Axle
- Shop: Timbren Rear Suspension Enhancement System
- Shop: Rivet Nuts for Reese Dual Cam High Performance Weight Distribution - Qty 4
- Search Results: 58437
- Search Results: tow mirrors
- Shop: Reese Dual Cam II Weight Distribution System w/ Sway Control - No Shank - 8K GTW, 800 TW
- Video: In-Depth Review of the Replacement Trunnion Spring Bar for Reese Weight Distribution System
- Video: What to Know About the Reese Replacement Chain Kit for Uplift Bracket for Weight Distribution
- Shop: Towing Mirrors
- Search Results: bearing 02475 trailer bearings races seals caps
- Search Results: spare tire mount
- Search Results: decked
- Video: Timbren Rear Suspension Enhancement System-TDR1500DQ: The Breakdown
- Video: Review of Weigh Safe Weight Distribution Hitch - True Tow Weight Distribution Hitch 2 Inch - WS94RR
- Shop: Trailer Hitch
- Q&A: Trailer Wheel/Tire Recommendation for Replacing Size 185/80R13 on Tandem Trailer Weiging 6400 lb
- Shop: Fifth Wheel Hitch
- Video: Towing Mirror Options - Custom Fit VS Universal Fit
- Q&A: Are Thread Forming Screws 58437 For Reese Dual Cam Sway Control RP26002 Reuseable?
- Q&A: Factory Brake Controller Port Location on 2011 Nissan Titan
- Shop: Brake Controller
- Shop: Camper Tie-Downs
- Article: Trailer Wiring Diagrams
on Weight Distribution Hitch
