Are Thread Forming Screws 58437 For Reese Dual Cam Sway Control RP26002 Reuseable?

Updated 07/26/2021 | Published 07/23/2021

Products Featured in This Question

Loctite Blue Stick Threadlocker - Medium Strength - 1/4" to 3/4" Nut/Bolt - 0.32 Oz Stick

(16)

$15.52

Question:

I just need to transfer my dual-cam sway control from one trailer to another both tube frames. I know I need the rivet nuts since they are stuck/formed to the frame but do I need to buy new thread forming screws along with the new rivet nuts? Or can I can use the mounting bolts from my existing trailer? In other words are the thread forming screws torque-to-yield or another type of “1-time use” that would prevent me from reusing them on my new trailer with new rivet nuts?

asked by: Tyler F

Helpful Expert Reply:

I reached out to my contact at Reese and you are correct that you will need new rivet nuts # RP58507 to install your Reese Dual Cam Weight Sway Control # RP26002 on your new trailer.

He mentioned that the replacement thread forming screws # 58437 can be reused as long as they are still in good shape, but you should use some thread locker like # LT37643 to keep them from backing out.

If the screws are not in the best of shape then you will need to replace them with the # 58437.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C