Replacement Hubs for a 2003 Venture Boat Trailer Model 2250 with 6-Lug Hubs
Products Featured in This Question
Question:
I have a 2003 venture boat trailer model # 2250. I wanted to order complete hub assembly with bearings. The hub assembly currently on it has a 6 bolt pattern. Can you tell me what hub assembly that you carry that will work?
asked by: Jerry
Expert Reply:
I did a little research and found that your 2003 Venture Boat trailer model 2250 has a capacity of 2,250 pounds but the 6-lug hubs and bearing information I found indicate that it uses hubs normally seen on 5,200 pound axles.
Since you have a boat trailer you might be interested in Kodiak hub # KH42655S which is stainless steel so it won't corrode. It uses inner bearing 25580 and outer bearing 15123.
Another option is hub # 8-213-5UC1 which uses the same inner bearing but a different outer bearing LM67048. The outer bearing still fits the same spindle it just has a different outer diameter to fit the hub.
For EZ lube axles with grease fittings at the ends I recommend # 8-213-5UC1-EZ. Both this axle and # 8-213-5UC1 come with bearings, races, and seals. Kodiak hub # KH42655S does not so you would also need bearing kit # BK3-100 (1 per hub). This kit comes with a 2.25 inch inner diameter grease seal. If a 2.125 inch grease seal is needed use # GS-2125DL.

Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kodiak Trailer Hub for 5,200-lb to 6,000-lb Axles - 6 on 5-1/2 - Stainless Steel
- Shop: Dexter Trailer Idler Hub Assembly for 6,000-lb E-Z Lube Axles - 6 on 5-1/2 - Galvanized
- Shop: DeeMaxx Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Maxx Coating - 6,000 lbs
- Search Results: calipers
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Video: DeeMaxx Disc Brake Kit: The Breakdown
- Video: An In-Depth Look at the Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles
- Shop: DeeMaxx Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Maxx Coating - 6,000 lbs
- Shop: Easy Grease Trailer Idler Hub Assembly for 6K Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2
- Search Results: wheel spacer
- Search Results: winch mounting plate
- Search Results: winch plate
- Search Results: winch
- Search Results: winch mounting bracket
- Video: Neighbor Interaction with the DeeMaxx Disc Brake Kit
- Video: DeeMaxx Disc Brake Kit Review
- Search Results: tjd
- Video: 2013 Honda Pilot T-One Vehicle Wiring Harness for Factory Tow Package: Complete Installation
- Video: Complete Breakdown of the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Grease Cap Plugs, Bearings and Brakes for 2005 Big Tex 14GN Trailer
- Q&A: Replacement 1-3/4 Wide 25-1/2 Long Slipper Leaf Spring
- Q&A: Converting From 4 On 9.44 to 5 On 5 Bolt Pattern
- Q&A: Where Does Reese Ball-Plate Assembly for Friction Sway-Control System # RP58062 Install On Trailer
- Q&A: Replacement Hubs for a 2001 Forest River RV Flagstaff Folding Pop-Up Camper
- Q&A: Replacement Axle, Hubs, Brakes, and Tires for Older Trailer With Dexter 22834 Hub
- Q&A: Where to Place Axles on 14 Foot Long Tandem Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer