Replacement 1-3/4 Wide 25-1/2 Long Slipper Leaf Spring

Updated 04/15/2020 | Published 04/13/2020

Question:

Hello, i am looking at your leaf springs, currently i have a 2 leaf spring, i took it off and measured 25.5inch from center bushing hold to end of hook, it is a radius end leaf spring, 25.5inch Length 1 3/4inch width.. i would like to know which of these should work thanks

asked by: Anthony H

Expert Reply:

The closest thing we have to those dimensions is the 3-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles # SP-179275. This measures 24-5/8" from the center of the eye to the end of the hook. Over time leaf springs can flatten out so typically a replacement leaf spring will be a little shorter than the current one. A 1" difference is a bit longer than normal, but if your leaf springs are pretty flat then I would venture to say this is what you're looking for. Just make sure the 2,000 lb weight capacity (for both springs combined) is correct for your application and you're good to go!

I have attached a photo with the dimensions and a review video that you can check out as well. Please note that you need to replace the leaf springs on the same axle at the same time. It's also worth noting that the best way to measure your leaf spring is with it suspended in the air so no weight is on it.

expert reply by: Jon G