Troubleshooting Trailer Brake Wiring Issues on a 2002 Chevy Silverado
Products Featured in This Question
Question:
When park lights are turned on, than the trailer brakes come on brake controller shows its working. 2002 Chev. Silverado was used on other trailers and worked fine. I bought rv. to pull, and when I connected the plug in the trailer brakes never worked or controller. than I went to turn on park lights while moving slowly and brakes came on the trailer. I did some troubleshooting and replaced truck 7 pin plug. still did not work. than found 40 amp fuse blown 0n truck fuse panel. still when I turn on park lights the controller shoes use. and brake pedal does not activate controller. but shows a c for connection. the controller is a prodigy. also left tail light on trailer is always dimmer than right side. Kind of lost what to do next so any ideas what to try next would be much appreciated. thank you.
asked by: Chris
Expert Reply:
Thank you for being very detailed with your question!
The first step I would take is to make sure everything on the truck and trailer is wired properly. Your Prodigy brake controller should have the wiring adapter # 3025-P which is custom for your 2002 Chevy Silverado. I recommend verifying you have the correct adapter because # 3015-P will also fit but it was pinned differently for the 2003-2006 Chevy Silverado's.
The next thing I would check is the wiring for the 7-way connector at the rear bumper. Make sure there are no wires that have been pinched together or cut allowing wires to touch each other. If everything on the truck looks correct, then I recommend testing the truck using a circuit tester like # PTW2993. Having a friend in the truck activating the lights and brake controller functions while you test the pins on the 7-way for proper function. See the diagram I included showing you the pin functions of a vehicle side 7-way connector.
If the truck tests fine, then we know the problem is on the trailer. Check the ground connections ensuring the connectors are clean and free of corrosion inside and out. The main connector grounds should be attached to clean and corrosion free bare metal surfaces. See if there is any exposed or frayed wire and fix as necessary.
The lights dimming on the trailer (one side more than the other) could result in having a bad ground or short, and when you depress the brakes causes excessive drain on your battery. It may also be possible that there are too many lights on your trailer which causes excessive load on truck.
I included several helpful articles for you as well. If you are unable to find the problem or a solution, let me know what you come up with and I would be more than happy to help with further troubleshooting.
Product Page this Question was Asked From
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Search Results: trailer brakes
- Search Results: brake controller
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Video: Hydrastar Brake Actuator HBA-CAM Review
- Article: Brake Controller Installation: Starting from Scratch
- Shop: Buyers Products Coupler w/ 5-Position Adjustable Channel - Weld-On - 2-5/16" Ball - 15,000 lbs
- Shop: Buyers Products Cast Coupler - Adjustable Channel Mount - Auto Latch - 2-5/16" Ball - 15K
- Shop: Replacement Handle for Buyers Products Heavy Duty Square Jacks
- Shop: Square 2-Speed Jack - Drop Leg w/ Spring Return - Weld On - Sidewind - 25K
- Video: Mount: Universal Installation Kit for Trailer Brake Controller on a 2002 Chevrolet Silverado
- Article: Trailer Lighting Requirements
- Video: Trailer Brake Controller Wire Testing
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: Wiring 7-Way Trailer Connector on 2002 Chevy Silverado 2500
- Search Results: swivel jack
- Shop: Trailer Hitch
- Q&A: Location of Brake Controller Fuse on a 2001 Chevy Silverado
- Q&A: Locating Brake Controller Power Fuse On a 2002 Chevy Silverado
- Q&A: Brake Controller Has Power But Trailer Brakes Do Not Work
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Search Results: winch mount plate
- Search Results: winch plate
- Q&A: Trailer Brake Controller on 2002 Chevy Silverado Does Not Work with Brake Pedal but Does with Manual
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Q&A: Color Code for Tow Package Wires on 2002 Chevy Silverado 1500
- Search Results: techonsha
- Search Results: tekonsha
- Q&A: Brake Controller Wiring Instructions for a 2011 Chevrolet Silverado Z82
on Accessories and Parts
Alex R.
6/28/2024
Thank you Chris B!!! i didn’t know that the adapter changes from 99-02 & 03-06 ! i had purchased a 03+ adapter so my brakes were engaged all the time time and i had to set my gain to 0. Thanks to you i was able to figure out that my plug is for 03+ so all i had to do is repin the connector to 99-02 (aka move the red wire) and it works perfectly now!!! thanks again !!!!