Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Our range of clamp-on trailer spare tire carriers is displayed on the linked page. You will want to choose one to both fit your frame dimensions and your spare's wheel bolt pattern. I like the Fulton #FSTC1000301 for its compatibility with both…
view full answer...I do have a few options available for you however, we currently do not sell torsion axles. You have two options to consider for your trailer, the Timbren axle-less suspension and the Dexter straight axles. As you have a gross trailer weight (GTW) of…
view full answer...The 113/108 L is the load index which is normally translated to pounds capacity. For instance the 113 is 2,535 lbs maximum capacity and 108 is 2,205 lbs. For instance the Westlake ST205/75R14 Radial Trailer Tire - Load Range D #274-000012 has a…
view full answer...We have three different spare tire carriers that will accommodate 6 lug wheels. The first is the Fulton High Mount spare tire carrier, FHDSTC0101. It fits wheels up to 16-1/2 inches in diameter. It is for 3 inch by 5 inch trailer tongues and has a…
view full answer...At this time we do not carry 16 inch wheels with a 5 bolt pattern or a lower profile tire. You would be best suited to stay with a 15 inch wheel and the highest rated tire available bias ply tire for 15 inch wheels, like the Karrier ST225/75D15 Bias…
view full answer...The weight rating of the Dexstar Galvanized Finish Steel Spoke Trailer Wheel, item #AM20747, is 3,050 pounds at 90 PSI.
view full answer...To determine the correct air pressure for the tires on your Jayco trailer take a look at the sidewall. The tires should have the maximum psi listed. Trailer tires should always be inflated to the maximum psi indicated on the tire. This is because…
view full answer...The best option I have to install a six bolt spare wheel/tire on an open trailer with angle iron frame is the Fulton Hi-Mount Spare Tire Carrier part #FHDSTC0101. In order to install the Fulton Hi-Mount Spare Tire Carrier you will need to use a block…
view full answer...The 4.80X12 2 ply tire at 60 psi that you have is a Load Range B tire. The other 4 ply tire at 90 psi should be a Load Range C tire. When the inflation pressure is higher that will indicate a higher load range. The Load Range B tire should have a…
view full answer...There is not a weight capacity for this Folding, Bumper Mounted Tire Carrier, part #TR-2, the only stipulation is that you only carry trailer tires on this, and not a wheel for any powered vehicles.
view full answer...Yes there is a difference between couplers for an a-frame trailer and a straight tongue trailer. They are a very different design so if you have an a-frame trailer you'd need something like the #CA-5210-B which you can see matches the shape of…
view full answer...The overall height of the Demco Spare Tire Carrier #DM15851-76 that you referenced is 18 inches. The mount is 7 inches wide and 6-1/2 inches deep.
view full answer...Related Searches
Filter Your Search
Contact and Help