Mount your spare tire up and out of the way with this stake pocket tire carrier. Base of carrier inserts into a standard 2x4 stake pocket on your trailer. Works with 5-, 6-, and 8-lug wheels.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're taking a look at the Brophy Trailer Stake Pocket Spare Tire Carrier. This unit allows you to mount your spare tire up and out of the way. The base of the carrier simply inserts into a standard two by four stake pocket on your trailer. Mounting hardware is included, so you place this into the stake pocket on your trailer.Then, you secure it in place by taking the mounting plate, take a bolt through the mounting plate, and then you thread it into the nut that's welded onto the base right here. Then, what you do is you just tighten that up until the mount plate is secure to the bottom of the stake pocket on your trailer. Installation is very quick, very easy, very simple.Then, right here, we have the actual plate where we're going to mount the spare tire and wheel assembly.
This is designed to fit wheels with a five on four and a half inch, five on five inch, six on five and a half inch, and eight on six and a half inch bolt pattern. You would take this bolt right here, place it through this back slot, push on the keeper. That's going to keep that bolt in place.Then, what you do is this has a little bit of room to accommodate different bolt patterns on the wheel. Find configuration that works best for you, place that on. Then, you fit your wheel over these studs and place on the lug nuts until the wheel is secured to the mounting plate right here.
Now, the mounting plate itself, that's a nice large design. Edge to edge, going this direction, it's about six inches. Going this direction, measures about seven and a half inches.It's made from a durable steel construction, features a nice black powder coated finish on it to resist rust and corrosion. Product's made in the USA and, again, this is designed to mount your spare tire up and out of the way. It fits into a standard two by four stake pocket on your trailer.
That's all there is to it. That's going to do it for today's look at the Brophy Trailer Stake Pocket Spare Tire Carrier.
Average Customer Rating: 4.8 out of 5 stars (29 Customer Reviews)
Mount your spare tire up and out of the way with this stake pocket tire carrier. Base of carrier inserts into a standard 2x4 stake pocket on your trailer. Works with 5-, 6-, and 8-lug wheels.Nice option for carrying my spare that I hadn't seen until looking on etrailer.com. Easy to take on and off as needed and seems sturdy enough to last for a long time. Fast shipping too! 734019
Super easy setup. The only issue that encountered was that the bottom of the base extended below the stake pocket. This made it so the entire assembly would bounce around in the stake pocket. I added a shim on each side to lock it into the stake pocket. Worked great. 671550
Arrived quickly, good quality product. 616150
Great product...Fit perfect in the stake pocket on my trailer and has a clean look..quality made and strong. 608893
It is built reasonably well. I planned to mount it on the side of my trailer, but it is too long. It puts the tire out quite a bit further than the fender so I can't use it. I went a different route for mounting my spare. 636878
I received the package yesterday evening, I opened the box but have not looked at it closely or installed it on trailer yet. But It arrived earlier then expected which was great. I received the adjustable drop hitch and 2 inch ball On Monday that also was recieved early. It was in very good condition, easy to assemble and Adjust, Heavy product. I would recommend E-trailer to everyone as they have great customer service and products! 604609
Just as described good quality and fast shipping ! 602705
This was a good company to do business with. Fast shipper. Received the product faster than expect. Product as described. You will not be disappointed when ordering from this company. 669621
Just as described and fast delivery . Always like to get stuff quick . 602706
Great, well built , and easy to install ! Works perfectly! 683187
Well, this is a very well made product. After reading all the reviews and watching the videos I purchased it to use facing in on my 102" trailer. It didn't fit with my spare due to the tire size. I'm sure I've voided the warranty, but I cut it partially apart and welded some angle iron to it to mount my spare flat on the deck. Long story short, it worked well for me with some modification. Just use caution if you need it to mount inward on your trailer. 670598
Exactly what I was looking for. Nice tight fit in the stake holder. Good heavy duty bracket. I recommend it. 628407
What I was looking for. However it's a little wobbly in the pocket after mounting. The bottom brace won't tighten down enough. Probably will get a little weld. 648036
Fit just like it was suppose too. 636544
Well built and easy to install. Your trailer needs to be made from heavier iron or with a full size tire it will flex a lot. No complaints. 751593
Great order process and very timely shipping. I was very impressed with the quality of the product. I work in QC with metal fabricated products and this product was well made. These guys should be looked at when you need similar products. 735401
Well built bracket, fits perfect into the stake pocket. Arrived 2 days earlier than expected. 732456
This carrier is as advertised, it is well built, and will do exactly what it is made for. My only concern is that it is loose in the stake pocket so I will have to engineer something to make it more rigid.. If I don't it will wind up cracking or damaging the pocket. 722408
the unit came earlier than scheduled. They were on it, and made sure I received what was paid for, and even at a lessor shipment cost. 716221
Very good product, lightning fast shipping. Highly recommended! 714616
Perfect fit and great quality 681127
This stake pocked spare carrier is very well built, and feels stable in the install. The only issue I'm having is that the bottom plate is forcing the carrier to lean outward somewhat once it's tightened down. I'll have to take a file to the hole on the bottom plate to allow for a bit of adjustment, as an elliptical hole would allow for some variance when you're putting everything together. Also, it would be nice if the fixed bolt on the plate had a pre-drilled hole so you could add a lock. 679254
Used on my 16 foot trailer. Attaches with a bolt so quick removal for security not an issues. Good heavy quality. Works perfectly for my needs. Quick shipping. 678651
Need to add a filler. A little loose. Feels and looks solid. 661127
FITS HUSBAND'S TRAILER PERFECTLY. 621667
Do you have a question about this Spare Tire Carrier?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.