bing tracking image

2012 Chevrolet Tahoe Roof Rack by Yakima

Roof Rack Includes:

Yakima HD Crossbars - Aluminum - Black - 60" Long - Qty 2
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4
HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4
Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 4

Part Numbers: Y01157,Y53TR,Y03541,Y00221

Retail:$782.07
Our Price: $767.75
You Save: $14.32
Roof Rack

In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me



Yakima HD Crossbars - Aluminum - Black - 60" Long - Qty 2
part number: Y01157

Heavy-duty crossbars mount to Yakima towers (sold separately) to create an aftermarket truck bed rack or roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.

Features:

  • Heavy-duty crossbars let you build an aftermarket truck bed rack or roof rack for your vehicle
    • Pair with Yakima truck bed towers or roof rack towers and a fit kit (sold separately) to create a complete system
  • Full-length design maximizes space for carriers and accessories
  • Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
    • Accessories can be mounted in top and bottom channels
  • Rubberized strips in top channels reduce wind noise and drag
    • Keep dirt and grime out of crossbars
    • Provide cushioning and slip resistance for your cargo
  • Bottom channels allow for easy installation on Yakima truck bed rack towers
    • SL adapter (Y03541 - sold separately) allows bars to work with BaseLine, TimberLine, SkyLine, and RidgeLine towers
    • Etched measurements on bottom of bars help center rack on your vehicle
  • Heavy-duty yet lightweight aluminum bars are durable and rustproof
  • Plastic endcaps help to keep water and debris out of bars
    • Integrated tie-down points make it easy to secure gear


Specs:

  • Quantity: 2 crossbars
  • Crossbar weight capacity: 500 lbs
    • Always observe your vehicle's maximum roof load capacity
  • Dimensions: 60" long x 3" wide x 1-1/2" tall
  • T-slot dimensions: 13/16" wide x 1/4" tall
  • T-slot top opening: 3/8"
  • Underbar slot: Full length
  • Limited lifetime warranty


8001157 Yakima HD Bar T-Slot Crossbars - Aluminum - Black - 60" Long - 500 lbs - Qty 2



SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4
part number: Y53TR

Heavy-duty towers let you safely mount 2 Yakima crossbars to a vehicle with fixed mounting points, flush side rails, or a track system. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.

Features:

  • 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
    • Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
  • Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
  • Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
    • Also fit RoundBar crossbars with adapter
  • Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
  • Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
  • Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
  • Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction


Specs:

  • Maximum tower load capacity: 165 lbs
  • Limited lifetime warranty


SkyLine Towers

The heavy-duty SkyLine towers allow you to mount 2 Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks. The towers adjust during installation to ensure your crossbars are level. The SkyLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's Landing Pad system .


Versatile BarBed

SkyLine BarBed

The SkyLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.


CoreBar CrossbarJetStream Crossbar

The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.


RoundBar CrossbarRoundBar Adapter

The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.


Torque Tool

The crossbars mount to the SkyLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening.


Simple Installation with Landing Pads

SkyLine with LandingPad

The towers install with custom-fit Landing Pads . To mount a tower simply open the cover, set the tower on the Landing Pad, and close the cover.


SkyLine Cover

Mounting posts on the bottom of the tower extend when the cover is closed to lock the tower in place on the Landing Pad.


SkyLine Pitch Diagram

Each tower's pitch can be adjusted up to 6 degrees forward or backward during installation. This lets you create a level mounting surface for your gear even on a curved roof. Simply loosen the bolt near the top of the tower assembly, adjust the position of your bar, and then re-tighten the bolt.


Same Key System Locks

4 Pack SKS Lock Cores

SkyLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.



8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2

Replaces 8000148



HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4
part number: Y03541

These adapters allow you to mount Yakima HD crossbars on BaseLine, SkyLine, TimberLine, or RidgeLine roof rack towers. Kit includes 4 adapters.

Features:

  • Adapters let you mount your Yakima HD crossbars on BaseLine, SkyLine, TimberLine, or RidgeLine roof rack towers
    • Can also be used as replacement adapters for JetStream crossbars
  • Easy installation with included tool
    • Simply slide adapter into bar's channel and secure it to the tower
  • Kit includes 4 adapters


8003541 HD Bar Adapter for Yakima StreamLine, BaseLine, TimberLine, Skyline, and RidgeLine Towers - Qty 4



Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 4
part number: Y00221

Custom-fit Landing Pads allow you to attach SkyLine and Control Towers to vehicles with standard, C-shaped rack tracks. Mount to existing tracks and combine with SkyLine and Control Towers to create a base for an aftermarket roof-rack system.

Features:

  • Provide mounting point for Yakima SkyLine and Control Towers
  • Fit vehicles with C-shaped factory rack tracks
  • Attach to factory tracks with anchor plates and screws
  • Include snap-on covers for protection when Towers are not in place


Specs:

  • Quantity: 4 pads
  • Lifetime warranty


8000221 Landing Pad 1 for Yakima Control or Sky Line Towers




Customer Satisfaction Score:


Customer Reviews

Yakima HD Crossbars - Aluminum - Black - 60" Long - Qty 2 - Y01157

SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 - Y53TR

HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 - Y03541

Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 - Y00221

Average Customer Rating:  4.8 out of 5 stars   (543 Customer Reviews)

Heavy-duty crossbars mount to Yakima towers (sold separately) to create an aftermarket truck bed rack or roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo. Heavy-duty towers let you safely mount 2 Yakima crossbars to a vehicle with fixed mounting points, flush side rails, or a track system. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. These adapters allow you to mount Yakima HD crossbars on BaseLine, SkyLine, TimberLine, or RidgeLine roof rack towers. Kit includes 4 adapters. Custom-fit Landing Pads allow you to attach SkyLine and Control Towers to vehicles with standard, C-shaped rack tracks. Mount to existing tracks and combine with SkyLine and Control Towers to create a base for an aftermarket roof-rack system.

by: See11/03/2022

with so many variables having someone that could sort through all them was very helpful Thanks etrailer

Ralph C.

11/6/2023

Great had a few Hic-Ups getting the correct set E-Trailer reps were all over it and got me going Great Company to work with

Etrailer Expert

Mike L.

11/16/2023

@RalphC We're happy to hear that, we're glad we could help!


by: Rob04/19/2023

Honestly, I love etrailer. I love the expert help that you all provide. It's clear by the 1 year follow-ups that you care more about the relationships with your customers then just making a sale. Your service is friendly, informative and fast. I always come here first to look for my next purchase. Thanks again-Rob.



by: Doug02/16/2022

First trip with the new rail system and it looks like it worked out just fine. Thanks to both of you and Kimberly for all of your help and follow up I do appreciate it.

Doug

2/18/2023

Ive had the rail system on my truck for about a year now and its been a tremendous help. It allows me to still use my bed and provides much needed extra storage space, mostly for all the dog items we carrycrates, gates, beds, food, etc. I like the fact the rail locks to the truck so I dont need to remove them at home or at our destination.



by: Nelson06/26/2023

It was what it was advertised and fit perfectly on my 2023 Ford Maverick



by: no such thing as free shipping06/27/2023

We purchased the rack 5 weeks in advance of our up and coming trip. (Rack is amazing FYI). However, The website states free shipping over a certain amount. Weeks went by with notifications nothing was sent and the order kept being pushed back.
Once I called I was told those who chose to purchase shipping vs opting for the free shipping got their orders firsts; everyone else fell to the bottom. After waiting a month for “free shipping” I opted to have paid shipping and I received the rack within days.
While this company has many products I could use, I refuse to use them again because what is advertised is NOT what they ethically hold themselves accountable too.



by: Dimitri02/01/2020

Yakima OverHaul HD is built tough, sturdy, light but heave duty, well designed, easy to install and remove by leaving the locking base on the track. The height can be adjusted easily to a desired height to fit just right. The "bonus" is a beer bottle opener on each rail :)

Customer service at etrailer is excellent! Always responsive, immediately reply to help with any questions. Tayler K. was my sales representative, she's been super!



by: Maureen02/12/2024

etrailer was a great place to order, quick and easy. Yakima products however are over priced and overly complicated.



by: Layne 02/11/2024
2022 Ram 3500

These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.



by: Blaine04/26/2021
2019 Ford Expedition

Great product and even better was the service with etrailer! These guys make it happen and delivery was super fast. Thanks for a fantastic experience, will be a return customer.

Yakima HD bars 60”
2018 Ford Expedition



by: Doug06/12/2022

These are some heavy duty crossbars.
Owned
several surfboard racks in 45 years and these are by far the best.
Great tie downs also.



by: John11/16/2023

Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.



by: Bryan03/27/2024

Very nice and heavy duty. They don’t look too fragile on a lifted truck with oversized tires.



by: Richard05/02/2022

Required for Yakima HD crossbars using timberland tower system.



by: Robert07/13/2021

The Yakima products are doing great. Just got home yesterday from a 18 day trip using them in Michigan's upper peninsula. Love them. Great products. Thanks again.



by: Robert07/13/2021

The Yakima products are doing great. Just got home yesterday from a 18 day trip using them in Michigan's upper peninsula. Love them. Great products. Thanks again.



by: Donald03/26/2023

I had a difficult time identifying whether these were the correct adapters for the rack towers that I was purchasing to fit my tracks but that has more to do with yakima doing everything a-la-cart instead of having kits that include everything you need if I hadn't already had the HD bars on my other rack and wanted to be able to transfer them to this rack I probably wouldn't have went to this expense because I think they are overpriced.AS far as etrailer is concerned I always receive great service and products and they are always well packaged and never damaged by poor delivery care and always fast delivery speed.



by: Mark 04/22/2023
Toyota

While putting the roof racks together, one needs to pay close attention to the detailed instructions; but, so far, the equipment is working well with a good fit on my Toyota highlander—I’ve traveled some 1000 miles so far.



by: Anthony 08/29/2023

Great product, as are all Yakima products,in my opinion. These are on a Yakima system installed on my Diamond Back tonneau cover. Very pleased with them



by: Michael01/22/2023
2019 Mercedes-Benz E-Class

Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.



by: Frank P.03/06/2016

Fit good with the OE track on roof. I like the new covers they supplied with the mounts.



by: William02/28/2024

You guys provide great products and excellent customer service.
Thanks



by: Wade 03/09/2024

Your service is nothing short of excellent! Thank you



by: Aaron 02/10/2024

Perfect match



by: Nicholas06/02/2020

I choose etrailer simply because they mailed to APO. I’m a AD SM, and a lot of companies don’t shop to APO. As soon as I ordered my product, I received an email as a courtesy from etrailer letting me know I had an individual that would be tracking my product every step of the way, reassuring a smooth process. Their site functionality was easy, their customer service was great. I wanted to know if they had bike racks that would fit my cross bars, I got a email right away with a suggestion and a link that would fit my needs. I’ll definitely order from etrailer if I ever need to again.



by: Hogan06/09/2023

I’ve placed 2 separate orders with etrailer in the last 6 weeks. Their service, response, pricing and follow-through have been terrific each time. I will use them every chance I get.


25
471
Show More Reviews

Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?


  • Replacement EndCap for Yakima HD Crossbars
  • Yes, we do have replacement end caps for the Yakima HD bars like the Yakima HD Crossbars # Y01157. The correct end cap is the Replacement EndCap for Yakima HD Crossbars # YA54FR, which comes with 1 end cap.
    view full answer...

  • Recommended Heavy Duty Roof Rack for a 2018 Ford Flex
  • It sounds like you might be looking for a roof rack for your 2018 Ford Flex that is both long and heavy duty. If that is the case then the best option for you is going to be dependent on your roof construction. If you have a bare roof then I recommend using the Yakima HD Crossbar System which is composed of part # Y01157, part # Y53TR, part # Y03541, and part # Y00233. If you have raised side rails then I also recommend the Yakima HD Crossbar System but this is composed of part # Y01157,
    view full answer...

  • Yakima HD Roof Rack and LockNLoad Fitment on a 2021 GMC Yukon AT4
  • The parts you need to build a Yakima HD roof rack kit for the flush rails on your 2021 GMC Yukon AT4 includes the following parts: 60" HD Crossbars - # Y01157 HD Bar SL Adapter - # Y03541 SightLine Towers - # Y64AR SightClip Fit Kit - # Y44UV Lock Core Kit - # Y07204 (optional) This will work great with the Yakima LockNLoad Platform Rack for Crossbars # Y45UV, but we still need to talk about the weight ratings as you do bring up a great point. The Yakima HD bars are actually
    view full answer...

  • Parts Needed to Install Yakima HD Crossbar Roof Rack in Camper Shell Tracks
  • I have a solution for you but Thule Podium feet can't be used with any Yakima crossbars. What you would need to install Yakima HD bars in the tracks you have are the following: x2 Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR x4 Replacement SkyLine Tower for Yakima Crossbars - Qty 1 # 8880614 x1 Yakima HD Crossbars QTY 2 part # Y01158
    view full answer...

  • What Length of Yakima HD Crossbar is Recommended for 2018 Subaru Crosstrek
  • Since the tracks on the bottom of the Yakima HD crossbars that attach to the feet do not run the full length of the bar we can't guarantee that a longer bar would fit. There's a good chance the track wouldn't be long enough to fit. So I would have to recommend you stick with the 55 inch long setup with the part # Y01156, # Y33TR, and # Y03541.
    view full answer...

  • Recommended Yakima Ladder Rack for my 2020 Ram 1500 and my Retrax XR Tonneau Cover Rails
  • The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover part # Y01151-5755 is exactly what you will need to add a rack to your 2020 Ram 1500. These will allow you to adjust the bars between 19" and 30" in height from the top of your bed rails to adjust to your needs.
    view full answer...

  • Can Accessories Be Installed In Bottom Channels On Yakima HD Crossbars
  • In regards to Yakima HD Crossbars like part # Y01157, you can secure accessories in both the top and bottom channels. These channels are pretty much a standard size so you can use track mounted accessories from pretty much any brand such as Thule, Rhino-Rack, Rola, Etc. The T-Bolt Kit part # THXADAPT12 would work for custom applications. That said, there isn't an exact size nut that must be used inside the channels.
    view full answer...

  • Recommended Roof Rack For 2018 Jeep Grand Cherokee With Matte Black Factory Roof Rails
  • The Thule and Inno roof racks for your 2018 Jeep Grand Cherokee are for if you have black and chrome roof rails running front to back. Since you have the matte black rails running front to back then you will want to look into a different setup. I would look into the Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 54" Long - Qty 2 # RRVA137S-2. You will also need # RRRLKVA and # DK234 to use this roof rack. This also has a weight capacity of 165lbs and has the top track for channel-mounted
    view full answer...

  • Rola Sport Roof Rack for a 2012 Honda Pilot
  • I have a solution for you, but unfortunately the Rola Sport Extended Series Roof Rack 59834 is not a fit for the 2012 Honda Pilot LX with a naked roof. Instead, you'll want the Yakima Roof rack consisting of these parts: # Y01157, # Y28TR, # Y03541, # Y06183. This will provide a roof rack for your vehicle. This gives you a sleek look like the Rola Sport but also one that fits your vehicle and has a better design.
    view full answer...

  • Roof Rack Recommendation for 2008 Jeep Grand Cherokee
  • The Rhino-Rack Vortex Aero and Yakima JetStream roof racks are the two most popular roof rack choices for your 2008 Grand Cherokee. The Rhino-Rack Vortex Aero rack would consist of the following parts: • Rhino-Rach Vortex Aero 49 inch crossbar, part # RRVA126B-2 • SX Series roof rack feet, part # RRSX100 The rack features a 143 lb capacity. The Yakima JetStream rack consists of these parts: • Yakima 60 Inch JetStream crossbars, part # Y00426 • Yakima Timberline Tower roof
    view full answer...

  • HD Style Roof Rack Recommendation for 2017 Acura RDX with Naked Roof
  • Thule does not have any roof rack fits for the naked roof versions of the 2017 Acura RDX and the fit kit from another brand of rack would not work with the system so your best option would be an all new roof rack. The most similar solution would be the Yakima HD roof rack part numbers # Y01157, # Y28TR, # Y03541, # Y06148, # Y06105. This is a similar heavy duty style crossbar that's also aero shaped to help with wind noise etc.
    view full answer...

  • Rooftop Capacity of a 2022 Subaru Outback Wagon
  • The Yakima HD Crossbars - Aluminum - Black - 60" Long item # Y01157 have a 500 lbs weight limit.
    view full answer...

  • Can 60" Yakima Crossbars Fit On A 2024 Subaru Ascent
  • The mounting tracks on the bottom of Thule crossbars don't extend the full length of the crossbar so a 60" crossbar wouldn't have a long enough track to mount to your Ascent. Yakima crossbars are designed with a full track on the bottom so you can put longer crossbars on without issue. The Yakima HD Crossbars # Y01157 you were looking at are beefy and are more so used for the bed of a truck. If you're looking for something that will be a bit slimmer to help with gas mileage and noise
    view full answer...

  • Can I Mount The Rhino-Rack Batwing To A Yakima HD Crossbar
  • You will not need a special mounting kit. The Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On - Passenger's Side - 118 Sq Ft, part # RR33200, mounts via the t-channels in crossbars. The Yakima HD Crossbars - Aluminum - Black - 60" Long - Qty 2, part # Y01157, have t-channels with the same dimensions of the Rhino-Rack Vortex crossbars. You will just need to make sure your crossbars extend beyond the Yakima tower. I have included a product description link and video review links below.
    view full answer...

  • Roof Rack For Roof Top Tent On A 2007 FJ Cruiser
  • Since your roof rack on your 2007 FJ Cruiser is rather large compared to others, I recommend getting the Yakima HD Crossbars # Y01157 with these feet # Y33TR. They wrap around your factory roof rails and will ensure a tight fit. You'll need these adapters # Y03541 for the feet to connect properly to the HD bars. This is the strongest bar setup and is the best for a Roof Top Tent Setup. Since you have a roof rack, you won't be able to get a platform on your roof and these HD bars are built
    view full answer...

  • Kayak Carrier Solution for 2019 Tundra Crewmax
  • I looked up the tonneau cover you have on your 2019 Toyota Tundra with a 5-1/2 foo bed and the deck rail system and it's going to prevent you from being able to install a ladder rack to carry kayaks since it covers up the tops of the bed rails. So you'd probably best served with a roof rack like the Yakima HD rack part # Y01157, # Y28TR, # Y03541, # Y06121, and # Y06129 for the kayaks and lumber. For a kayak carrier you could then use the JayLow part # Y04073.
    view full answer...

  • Weight Capacity of the Yakima HD Crossbars
  • The Yakima HD Crossbar Set, part # Y01157, have a weight capacity of 500 lbs in conjunction (i.e. the two of them together can hold 500 lbs). The reason the single bar, part # YA34FR, states that its weight capacity is 500 lbs because these bars are intended to be used as a set (either with the same one or with another HD bar of a different length). Even with just the 500 lbs, this number is more than likely much higher than you can put on the top of your vehicle. Though these crossbars
    view full answer...

  • Does Mounting Kit for Thule Flat Top Ski Carrier Fit Yakima HD Crossbars
  • The Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks # 7533998 is designed to work on crossbars that are narrower than 3-3/4 inches, and since the Yakima HD Crossbars like the 55 inch # Y01156 and 60 inch # Y01157 are 3 inches wide, the Mounting Kit will absolutely work with the HD Crossbars. I have added a link below to a video review for you to check out if you'd like of the Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks # 7533998.
    view full answer...

  • Roof Rack for 2016 Jeep Grand Cherokee to Carry Ladder Rack
  • For carrying ladders the Yakima HD bars are a really great option as they have a higher weight capacity and a more rugged design while still being aerodynamic. For that there are a few options based on the roof style of your vehicle. If you have a totally naked roof or have black matte flush rails you'd need the part numbers # Y01157, # Y28TR, # Y03541, and # Y06121. Or if you have black and chrome rails you'd want # Y01156, # Y53TR, # Y03541, and # Y00244.
    view full answer...

  • Best Roof Rack and Kayak Carriers to Transport 2 Kayaks on a 2019 Ford Edge with a Glass Roof
  • I have a great roof rack recommendation for you! It's the Yakima HD Crossbars, part # Y01157. These aero-style crossbars are 60" in length, so they will extend past the feet by about 5" on each side. Combine these with the BaseLine Towers, part # Y28TR, and the two BaseClips, part # Y06102 and # Y06139, to complete the roof rack setup. I've linked to a video review of the HD bars for you to look at. As for the kayaks carriers, there may not be enough room to lay two of them down flat
    view full answer...

  • Which Yakima Landing Pads for 2021 Toyota Highlander to Mount Skyline Towers
  • To use the Yakima Skyline Towers # Y53TR on your 2021 Toyota Highlander the correct landing pads are the Landing Pad 28 for Skyline and Control Towers # Y66VR.
    view full answer...

  • Can I Use the 60-Inch Yakima JetStream Crossbars to Use My Hullavator on My 2021 Toyota Highlander?
  • If you are looking at the JetStream crossbar system for your 2021 Toyota Highlander Hybrid with flush rails, you are correct that you need the SkyLine Towers # Y53TR, Landing Pad 28 # Y66VR, and Lock Cores # Y07204. These etrailer part numbers correspond to the Yakima part numbers you mentioned. However, the JetStream Crossbars 8459629 did not come up with a matching etrailer part number. However, if you are looking for 60-inch bars, those are # Y00426. While Yakima recommends 50-inch crossbars
    view full answer...

  • Yakima HD Crossbar Rack For Retrax Pro XR Tonneau Cover
  • You'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following: - Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length - Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number) - SkyLine Towers for Yakima Crossbars # Y53TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
    view full answer...

  • Parts to Make a Rhino Rack Vortex bars fit with Snugtop Roof Rack Rails
  • The setup you need for your track system on your SnugTop which is made by Yakima will consist of four components. part # Y53TR SkyLine Towers for Yakima Crossbars Track Systems part # Y00221 Landing Pad 1 for Yakima Control Towers part # Y00422 Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2 part # Y07204 Yakima Same Key System (SKS) Lock Cores (QTY 4) These components will allow you to attach any roof mounted accessories you may want.
    view full answer...

  • How to Order Yakima HardTop Roof Rack without Roof Tracks
  • You'd need two sets of the Landing Pad 1 # Y00221, the 60 inch CoreBars # Y00422, and SkyLine Towers # Y53TR and you'd have everything the discontinued Y01618 has without the tracks.
    view full answer...

  • Yakima Roof Rack System For Flush Rails On A 2021 Toyota Rav4
  • I understand how it can be overwhelming at first, but that's why I'm here! I do like the Yakima Skyline Towers # Y53TR so definitely get those. The Skyline towers need to mount to what they call a Landing Pad. For your 2021 Toyota Rav4 you need the Landing Pad 23 # Y98FR. The landing pad will use a threaded hole inside your tracks to secure it to your vehicle and the Skyline towers will connect to that! As far as bars go, the longest crossbar length kitted for your 2021 Toyota Rav4 is
    view full answer...

  • Yakima Roof Rack for 2022 Subaru Legacy
  • You are on point with Yakima being a really high-quality product so I completely understand wanting to stick with them for a roof rack on your 2022 Subaru Legacy. The Yakima roof rack that fits your Legacy consists of the following parts: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 for Yakima Towers # Y00248 - Same Key System Lock Cores (Optional) # Y07204 I have added links to video reviews for you to check out as well.
    view full answer...

  • Replacement Yakima Towers Needed For Custom Install of Jetstream Cross Bars On A.R.E. Topper
  • You will need the SkyLine Towers for Yakima Crossbars, # Y53TR for a set of 4 or, # 8880614 for 1 each.
    view full answer...

  • Do Yakima Core Bars fit Thule Tracks on Leer Cap
  • A Yakima rack with CoreBars is compatible with the Thule tracks on the Leer cap of your 2016 Toyota Tacoma. To install the rack, you would need the following parts: Two of the Landing Pad 1 for Yakima Control Towers # Y00221 SkyLine Towers for Yakima Crossbars # Y53TR The Yakima CoreBars you need would depend on the width of your Leer cap; your options are Yakima CoreBar Crossbars 50" Long # Y00421 Yakima CoreBar Crossbars 60" Long # Y00422 Yakima CoreBar Crossbars 70" Long
    view full answer...

  • How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  • Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
    view full answer...

  • Parts Needed to Add Roof Rack to 2004 Ford Escape With Factory Tracks
  • We have all the parts you need to add a roof rack to your 2004 Ford Escape, and I think the best option is a round bar system from Yakima because of its value. It is both a quality rack and cost-effective so I strongly recommend it; the rack is made up of the following parts: - Round 48" CrossBars for Yakima Roof Rack # Y00408 - Yakima SkyLine Towers # Y53TR - RoundBar SL Adapter # Y03536 - Landing Pad 1 for Yakima Control Towers # Y00221
    view full answer...

  • Parts Needed to Install Round Bar Yakima Roof Rack on 2019 Toyota Tacoma
  • I can help you install the Yakima round bars you have on your 2019 Toyota Tacoma but Yakima actually no longer uses the Q Tower racks so the Q clips aren't available anymore and were never tested on your truck. So what you'd need is the # Y53TR for the towers, # Y03536 for the roundbar adapter, and Landing Pad 24 # Y74FR since you already have bars like the # Y00408.
    view full answer...

  • Can Yakima Rail Grab Lock Cores be Swapped into Skyline Towers
  • If you unlock the Yakima cores you can use the change key part # Y8007835 to remove the cores from the old rack and then install them into the Skyline towers # Y53TR. Yakima hasn't changed their lock core design so this would work easily.
    view full answer...

  • Parts Needed to Order 70 inch Yakima Jetstream Roof Rack for 2016 Subaru Outback
  • To do a 70 inch Yakima Jetstream roof rack on your 2016 Subaru Outback Wagon with the flush rail crossbar setup you'd need the Skyline Towers part # Y53TR, the fit kit # Y00241 and the crossbars # Y00427.
    view full answer...

  • Fit Kit for Installing Yakima Legs on Thule Tracks for 2022 Toyota Tacoma
  • Thanks for reaching out! If you have the SkyLine Towers for Yakima Crossbars # Y53TR then all you need is 2 sets of the Landing Pad 26 # Y75ZR and you're set. If you have a different leg kit then you need the SkyLine towers to accomplish this as the other Yakima legs are for different installation types.
    view full answer...

  • Can the Yakima SkyRise Tent Be Used on a 2011 Honda CR-V
  • According to the owner's manual for your 2011 Honda CR-V, the roof has a weight capacity of 165 lbs. Therefore, you can use a Yakima SkyRise Tent on your CR-V without any issues as it meets the minimum weight capacity requirement of 165 lbs. The Yakima SkyRise does have a 60 lb weight capacity but since the ladder will support much of the weight, the roof rack/vehicle only needs to be rated for 165 bs. In order to use the Yakima SkyRise on your CR-V you will also need an aftermarket
    view full answer...

  • How to Carry Cargo on 2014 Mercedes Benz E-350 Coupe with 2 Doors
  • If you are looking to carry cargo or bike racks on a 2014 Mercedes-Benz E-350 the best option is going to be to install a roof rack because the only hitches available are for a '14 E-350 are for a sedan or wagon. The good news is that you can install a roof rack whether or not you have the Panorama Roof as it will attach to fixed mounting points on your Mercedes. I highly recommend going with a roof rack option from Yakima because it will give your 2014 Mercedes E-350 coupe a roof rack
    view full answer...

  • Dimensions of Metal Nut on Yakima HD Bar SL Adapter 4-piece Kit Y03541
  • The dimensions of the rectangular metal nut part on the Yakima HD Bar SL Adapter 4-piece kit # Y03541 (their part 8003541) and the single piece part # 8880637 are shown in the linked image. The metal nut measures 1-1/8-inch x 3/4-inch. The overall height of the nut from the top to the wider base part is 3/4-inch.
    view full answer...

  • Converting Yakima Timberline Towers To Work With Yakima Jetstream Crossbars
  • All you need is this T-Bolt Adapter # Y03541. It will take the place of your RoundBar Adapter # Y03536 and will work with the Jetstream Crossbars # Y00426
    view full answer...

  • Solution for Roof Rack With Three Crossbars on 2014 Nissan NV 3500
  • Since you were looking at the Yakima HD Crossbars # Y01158 I will assume these are the crossbars you would like for your roof rack. Although there is no separate bundle for an additional crossbar, the parts are available to make this happen. For the roof rack with 2 crossbars you will need the # Y01158, # Y53TR, # Y03541, and two of the # Y00221. Adding the full rack to the cart will get you everything you need from these part numbers. In order to add the third bar you will need the
    view full answer...

  • Availability Of Screw To Connect Yakima CoreBar To SkyLine Towers
  • The screw that you are looking for comes with the SkyLine Towers. I am sorry to say that we do not offer the screw individually. So the only solution we can offer would be to buy a whole new tower. The SkyLine Towers are available individually with part # 8880614. I know this may be a bit costly just to get one screw. It may be worth contacting Yakima to see if they can provide them. All of their racks come with a lifetime warranty so the screws might be covered.
    view full answer...

  • Will Yakima HD Bar SL Adapter Fit JetStream Bars
  • The HD Bar SL Adapter # Y03541 is only designed for the HD bars. Since you have JetStream crossbars you will need the Replacement Adapter and Seat for Yakima JetStream Crossbars # 8880637 instead. This will allow you to use the bars with your SkyLine towers.
    view full answer...

  • Roof Rack for Camper Shell and Roof of 2020 Chevy Silverado 1500
  • You can then use the Yakima roof rack with landing pad 1 part # Y00221, two of the control towers # Y8890027, and the single crossbar # Y8810025. Then for a single bar rack for the roof of your 2020 Chevy Silverado 1500 you'd want the part # RRVA150B, # RRRLKVAH, and # DK427H and you'd be set.
    view full answer...

  • What Parts Are Needed To Make Low-Profile Bed Rack System For 2022 Ford F-150 w/ RetraxPro Cover
  • Looks like you are pretty much there! The Landing pad 1 # Y00221, Skyline Towers # Y53TR, and 68" Yakima HD crossbars # Y01158 will all work perfectly with the RetraxPro XR rails on your 2022 Ford F-150. This would be perfect for carrying bike racks with a rack like # TH598004-FB, or a platform like the # Y05045-39 but it would be pretty hard to carry kayaks or canoes with this style of rack as you would have a ton of overhang past the bed which is less than ideal. For a kayak
    view full answer...

  • Yakima Round Bar Complete Roof Rack System With Tracks
  • You can piece together a round bar system that is going to be similar to a Yakima roof rack with round bars and a track system. What you will need are the following parts: - Yakima 54" Tracks for Roof Racks # Y01127 - Yakima Control Tower # Y8890027 (Quantity of 4) - Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2) - Round 58" CrossBars for Yakima Roof Rack System # Y00409 OR Round 66" CrossBars for Yakima Roof Rack System # Y00410 This will give you a track-based
    view full answer...

  • How To Mount Yakima Towers In Retrax Tonneau Cover Tracks
  • If you have the Yakima Skyline or Control Towers then you can use the Landing Pad 1 for Yakima SkyLine and Control Towers part # Y00221 to mount them into tracks/channels like those found on select Retrax Tonneau Covers.
    view full answer...

  • Roof Rack for 2008 Fleetwood Niagara Pop Up Camper with Factory Track System
  • I did some research on your 2008 Fleetwood Niagara Pop Up Camper and it appears that most of the major roof rack manufacturers (Thule/Yakima/Rhino-Rack) have systems that will work with the factory tracks you have on the roof of your popup camper. One of the most cost effective options we have for you is from Yakima in their round bar system. This system is composed of the fit kit part # Y00221(2), mounting feet part # Y8890027 (4), and crossbars part # Y8810027 (2). Please keep in mind
    view full answer...

  • Replacement T-Slot Nuts & Bolts Hardware For Yakima Landing Pad 1
  • To mount Yakima SkyLine towers in your UltraGroove the foot pack is the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221, and the correct replacement hardware with the T-slot nuts and bolts for this foot pack is the following: - Replacement Hardware Bag for Yakima Landing Pad 1 # Y8890028 You'll need a quantity of two of the # Y8890028 for all four feet.
    view full answer...

  • Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
  • You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
    view full answer...

  • Roof Rack for Leer Cap With Factory Tracks on 2015 Ram 1500
  • You can absolutely get a roof rack for the factory tracks of the Leer cap on your 2015 Ram 1500. I have spoken about this exact issue with Yakima and they have told me the exact parts you need for a roof rack on your truck cap, which is the following: - Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2) - SkyLine Towers for Yakima Crossbars # Y53TR Crossbars (the correct length will depend on how wide the tracks are on your Leer cap, so just be sure to measure and then
    view full answer...

  • Recommended Roof Rack And Canoe Carrier For 2009 Ford F-150 With ARE Camper With Yakima Roof Tracks
  • We have just what you need to put a rack and canoe carrier on your 2009 F-150 with the ARE camper. First you will need 2 pairs of the Landing Pad 1 for Yakima Control Towers, part # Y00221. Then you need the SkyLine Towers for Yakima Crossbars, part # Y53TR. For crossbars you can take a quick measurement to make sure you get the right length for your camper. For 60-inch I recommend part # Y00422. If you want 70-inch you will need part # Y00423. I also recommend the Yakima
    view full answer...

  • Yakima Roof Rack Components Needed to Install Roof Rack in Pace Tonneau
  • I spoke with my contact at Yakima and he told me that you will need the part numbers # Y00221 (quantity of 2), and part # Y8890027 (quantity 4) for the feet and then crossbars # Y00409 to complete a rack in the Pace rails of your tonneau.
    view full answer...

  • Is Yakima Landing Pad 1 Used for Yakima Roof Rack on a 1996 Ford Explorer
  • Yes, the Landing Pad 1 # Y00221 is for your 1996 Ford Explorer. You will use 2 sets of these with the SkyLine Towers # Y53TR so you can mount crossbars like the 50" JetStream Crossbars # Y00425 on your Explorer.
    view full answer...

  • How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  • There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
    view full answer...

  • Yakima Towers Needed to Mount to Landing Pad 1 on Track System
  • It looks like you have the Yakima Landing Pad 1 for Yakima Control Towers # Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars # Y53TR. These towers will allow you to choose between the Jetstream # Y00426 (60" long) / # Y00427 (70" long), the Yakima CoreBar # Y00422 (60" long)/ # Y00423 or use Round bars like the Yakima # Y00410 with the adapter # Y03536. These towers are not compatible with square bars that you had asked about in a previous question. If
    view full answer...

  • Parts Needed to Install Yakima Roof Rack in ARE Truck Camper Shell Tracks
  • I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your ARE camper. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the width of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411
    view full answer...

  • Is the Mounting Hardware for the Landing Pads for Yakima Control Towers Part # Y00221 Included
  • The mounting hardware that is needed to install the Landing Pads for Yakima Control Towers part # Y00221 is included therefore no additional purchase will be necessary. I have attached a photo that shows everything that is included in the kit above for you as well.
    view full answer...

  • Dimension of Mounting Hole Spacing of Yakima Landing Pad 1 #Y00221
  • I was able to go out to the warehouse and measure the Yakima Landing Pad 1 for you and found that the mounting hole spacing is 3-15/16 inches from center to center. I have linked a picture and the part to this page for your convenience.
    view full answer...

  • What is the Difference Between Yakima Landing Pads 1 and 4
  • The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
    view full answer...

  • Adding Crossbars to an ARE Camper Shell with Tracks
  • I believe your ARE camper shell has Yakima tracks installed but it doesn't really matter which brand you have as most of them will accept each others mounting feet. However, Yakima has the most cost effective option for you so I recommend using the landing pads part # Y00221 (2), control tower part # Y8890027 (4), and crossbars part # Y8810025 (2). The round crossbars are cut to fit. This is the most inexpensive option we have for you to add crossbars to your ARE camper shell.
    view full answer...

  • Parts Needed to Install Yakima Roof Rack in Channel on Truck Camper Shell
  • The Yakima Landing Pad 1 part # Y00221 is the correct fit kit to allow you to install a Yakima roof rack in the channels of your camper shell. You do have to remove the end caps of the tracks to be able to install the square nuts that slide into the channel and hold the rack in place. You'd need a quantity of 2 of these fit kits though for both bars. You'll also need: quantity 4 of the Control Towers # Y8890027 and depending on the length of your cap quantity 2 Crossbars like:
    view full answer...

  • What Parts do I Need to Install My Yakima RoundBars on My Truck Topper on My 2021 Toyota Tacoma?
  • If you already have Yakima Round Bars like the # Y00408, the parts you need to attach the crossbars to the tracks are 4 of the Replacement Yakima Control Tower for Factory-installed Tracks # Y8890027 and 2 sets of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221. For the tracks themselves, they come in 3 different sizes: - Yakima 42" Tracks for Roof Racks # Y01126 - Yakima 54" Tracks for Roof Racks # Y26RR - Yakima 60" Tracks for Roof Racks # Y01135 Since most
    view full answer...

Yakima Accessories

Fit to this rack on your 2012 Chevrolet Tahoe

Info for these parts were:

Employee Zack K
Video Edited:
Zack K
Employee Dustin K
Video Edited:
Dustin K
Employee Tyler C
Written by:
Tyler C
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Joshua S
Video by:
Joshua S
Employee Wilson B
Updated by:
Wilson B
Employee Jenny M
Updated by:
Jenny M
Employee Alex H
Updated by:
Alex H
Employee Michael B
Updated by:
Michael B
Employee Noah M
Updated by:
Noah M
Employee David F
Installed by:
David F
Employee Andy C
Installed by:
Andy C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Chevrolet Tahoe Accessories