Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
Item # C59236
Retail:$120.95
Our Price: $78.54
You Save: 35%
Confirmed to Fit
2006 Volvo XC70
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (940)
- Q & A (0)
- Photos
2006 Volvo XC70 - Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Trailer Hitch Wiring
- 4 Flat
- Converter
- CURT
Install a 4-way flat on your Volvo XC70 with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Ensures that your vehicle's wiring matches that of your trailer
- Works with 2-wire, 3-wire and pulse-width modulation (PWM) systems
- Connects directly to your battery to avoid overloading your vehicle's electrical system
- Constructed using surface-mount technology (SMT) for consistent, reliable performance
- Maximizes trailer light yield and intensity while producing minimal heat
- Ensures superior operation in rough road conditions
- Resists water and vibration thanks to potted enclosure
- Connects directly to your vehicle's wiring with the included quick-splice connectors
- Color-coded wires and wiring guide ease installation
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 5 amps per circuit
- Tail lights: 7.5 amps per circuit
- Limited 1-year warranty
Installation
To determine where to splice into your vehicle's tail light wiring, you will need to consult the included instructions. Use the quick-splice connectors to attach the input wires of the tail light converter to the corresponding wires from your vehicle. Once you've spliced in the converter, connect the included hot lead to the black wire and run it up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Then locate a flat surface inside your vehicle near the tail lights and adhere the black converter box using the provided double-sided tape. Find a raw metal surface to use as a ground point and secure the white ground wire using the provided ring terminal and screw. Finally, secure the converter wires to your vehicle using the included cable ties.
It is recommended that you use a small amount of grease on the 4-pole connector to help prevent corrosion.
Powered Tail Light Converter with Surface-Mount Technology
Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring. If your vehicle operates on a 3-wire system, which means that it has separate brake and turn signals, then those signals will need to be combined so that they run on 1 wire to properly activate your trailer's tail lights. This converter will also ensure that your trailer's lights illuminate fully, even if your vehicle has pulse-width modulation (PWM) wiring. Note: This will not affect how the tail lights on your vehicle operate.
This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
59236 Curt Powered Tail Light Converter for 2-Wire, 3-Wire or PWM Systems - 4-Way Flat Harness
Replaces 59200
Compare to Tekonsha TK47FR
Installation Details
California residents: click here
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector - C59236
Average Customer Rating: 4.7 out of 5 stars (937 Customer Reviews)
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.by: Steve05/08/2023
So, video left out removal of plastic trays behind each wheel well. A small torx is required.
Per video my wiring on left side is correct Red to the Yellow/Black, Yellow to the Blue/Green. Test tool (as seen in video) shows nothing when brake pedal pushed; brake indicators on tester both light up when running lights are on, but the running lights indicator does not light up.
Blinker indicators on tester are correct.
Have done the training cycle 6 times, slowly.
Steve B.
5/23/2023
Hi. Turns out the video for the 2013 x3 is correct, for my 2017. Brake and tail lights on separate wires.
by: Vic Smith02/18/2024
2021 Ford Mustang Mach-E
For my application, a 2021 Mach-e, this required cutting and splicing into the LED tail lights. I went back to the interweb and ordered one that was plug and play and did not require splicing. Yes, there is a video where a guy identifies exactly how to install this particular kit on the Mach-e, but it was just a bridge too far for me. The plug and play wiring works great and was easier to install. The plug and play wiring took about 80% of the installation time, the hitch itself took about 20% of the install time.
Katrina D.
2/27/2024
I am sorry that this harness was a bit more complicated than what was expected to get installed. I would go with the plug and play all day. Unfortunately, the only harness we have for your 2021 Mach-E that is a plug and play option is part # TK24VR, which is currently on extended back order. This means, that we are waiting, but do not have a date that our shipment will be in, so we took the part off of the site for now.
by: Jerry K03/16/2024
This works great and people can see the brakes turn signals and tail lights when we have the bikes on the back of the car. We put this on so we could plug a portable lighting system in for our bike rack.
by: Allen03/06/2024
2022 Kia Soul
I'm sure the wiring is fine. However, I bought from etrailer because the product support was supposed to be great. We can't figure out which wires to attach to. Yes, I've read instructions. Yes, I've used a multimeter and test light. Yes, I've posted in forums. Yes, I've spent hours looking online. No dice. I even had an electrician give it a go to determine what to splice. I'm injured so can't walk, making some direct instructions on which wires to splice more important at this time. I can't keep removing the lights, etc. and reinstalling them when I can't ID the correct wires. I told them this on the phone when I ordered. They seemed supportive. When I repeatedly asked for which wires to splice the response was something akin to, "We don't know. Figure it out."
Two thumbs down. Received great support from a different online supplier.
by: Michael 04/26/2024
Buick
I have a small convertible Buick. Almost no one would put a trailer behind this car. But I use it to pull my jet ski. It was great to have this connector. It works perfectly.
by: Chris03/22/2024
Terrible job packing hitch. See pics. Hitch has deep scratches through paint. Won't purchase from trailer again.
by: Robert 04/24/2024
Your installation video was great. I don't think I could have found the correct wires without it. The Curt instructions were not clear in determining which wiring scheme the Pacific has. I still don't know what PS stands for in their chart, but your video explained it nicely.
by: Dave N10/29/2023
2024 Kia Telluride
The wiring harness doesn't quite work as advertised. I followed the provided instructions. Now when I turn on the left turn signal on my 2024 Kia Telluride, the left side trailer running lights also flash with the turn signal. The right side turn signal works correctly. Harness installation was a huge PITA. I blame Kia for not having a plug and play like my 2022 Santa Fe had. I had to remove both tail lights, splice into the factory wiring then run a power wire from the rear to the car's battery in the front. Again, a huge PITA but that's Kia's fault, not etrailer. Except for those things, I would've given more stars.
Jenny N.
11/2/2023
Yes, I would say powered hardwire harnesses are a tough install. I want to help do little trouble shooting with you. Can you check the area where you grounded the wire to make sure that it is to bare metal. If it is a clean, metal location already, disconnect the ground wire and attach it to a long piece of wire. Run this wire to the vehicle's negative battery terminal for testing purposes. If this solves the issue, the ground wire can be permanently run to the negative battery terminal or moved to a new location. I am hoping that this will stop the left turn signal from flashing on the trailer.
by: Cynthia02/29/2024
2018 Volvo XC60
My son said this is the part I needed so I guess it's good but my son, the mechanic said it's not what I needed. I guess it was too much so need to return.
Katrina D.
3/7/2024
Sure! I've got your information sent over to customer service to get the return processed. Yeah, that is the only confirmed universal option that we have for your 2018 Volvo XC60, I wish it was a bit less expensive and that there was an easy plug and play option for your vehicle. Some mechanics do carry some OEM parts for trailer wiring for vehicles; maybe see if your son is able to help you find an OEM harness. It may be a bit expensive, but you could always reach out to a Volvo Dealership to get an OEM harness.
by: Mark N02/04/2024
What a great experience. The wiring harness kit was easy to install, and the people at etrailer were courteous and happy to answer my questions. They got right back to me and saved me lots of time. It’s very rare to get service like that anymore.
BTW, the unit works very well.
Thanks etrailer.
by: Mike 01/22/2024
Mercury
I received the Trailer hitch, and I was able to put on my 2011 Mercury
Marqui all by myself with the assistance of three jacks. I completed
the job in my garage at home. I did watch the videos on u-tube about
6X. I am very happy with the trailer hitch.
by: John 03/10/2024
It’s a great product. We pull the small trailer from California to Missouri. No problems at all just like factory.
by: Robert04/27/2023
2023 Hyundai Palisade
2023 Hyundai Palisades are unique. Your website indicates that this item works for the 2023 Palisade, but according to a lady in your office, it only addresses the lights on the trailer, but does not disconnect the automatic braking system built into the Palisade in the event of a rear end collision that applies the brakes when it senses an obstacle (read boat trailer). Very frustrating!
Jenny N.
4/28/2023
I have a fix for you. All you need to do is turn off that feature in the vehicle while towing. I have a Hyundai and you will just need to play around in the vehicle menu system to find it and turn it off. I recommend reading up in your manual the section on towing. There may be other features you have that you will want to disable.
by: Philip 03/19/2024
2019 Ford Ecosport
A little tricky to install, but the videos they provide do a great job of explaining what needs to happen. (2019 Ford EcoSport.) The wire clips are a little finicky... had issue with one side, but managed to get it working.
by: Paul 04/29/2024
Honda Element
Worked as advertised. Used on a Honda Element. I would recommend to others.
by: Bill04/28/2024
Fantastic and great video by on how to B install
by: Alexander 02/14/2024
Kia
If you need something trailer/towing related, e trailer has always been great for me. This product worked great for my 2024 Kia telluride xline trim.
by: Stephen08/26/2023
Once I understood I had a 2 wire system in my 2022 BMW X3 the installation went well. The green wire for the right tail light is too short and I had to splice on an additional 2' of wire.
by: Doug05/08/2023
I installed this item on my 2023 Hyundai Palisade and it did not go very well. The blue wire connectors that came with it are terrible and should not be used. Taillight wires on vehicles with LED lights are extremely thin and the blue connectors do not pierce thru the insulation and into the wire. Over half of the lights didn’t work and I had to spend way too much time figuring out where the problem was and then making new connections. I cut and soldered the connections to get the lights working.
by: Thomas 05/01/2024
Works great when installed correctly according to the instructions.
by: Thomas 11/09/2023
Excellent customer service. Had a few questions regarding correct trailer hitch and wiring harness to get and was quickly able to chat with a friendly and knowledgeable eTrailer associate. After my order within hours they had my order packed up and to the carrier for shipping. Very satisfied.
by: Aaron10/31/2023
2005 Mazda 6
Because this was a PIA simply because the wires that come in this kit coming out of the box that go straight to the 1 side tail light are not long enough.. it took me longer to figure out where to mount the box & fit behind paneling than it did to hook up the whole kit....EXTREMELY limited to where you can mount the box & hard to find locations that close. If they would make the wires a bit longer everything would be fine. I would pay more for a kit with a little longer wires simply to avoid the frustration. other than that the kit is fine and does the job as it should w/ no issues. Just not a good experience with Curt this round of receiver & light kits.... - Etrailer always great though, My go to always!
by: Michael 03/25/2024
Works as it should. The video made it easy to install. Didn't come with quiet enough hardware to install but that wasn't a big deal though.
by: Clarity-2110/23/2023
This part of the installation was the most challenging. I couldn't find a video specific to my Clarity, but the Honda Civic video was close enough. I did need to use smaller gauge wire splice connectors. The ones supplied didn't cut through the insulation of my cars small wires.
by: William02/08/2024
2023 Mazda CX-50
Upon arrival, the box was a mess..... holes, tears etc. good thing that the contents were not anything that could be damaged...
25
938
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Recommended 7-way Connector and Trailer Brake Controller For 2019 Mini Countryman S ALL4I would be happy to help! To install a 7-way connector on your 2019 Mini Countryman S ALL4 you will need to first install a 4-way connector using the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. This will get spliced into the factory wiring of your Mini, and using a circuit tester # PTW2993 will help to identify the functions of your factory wiring. With a 4-way connector installed I recommend the # ETBC7L with the Curt Echo Wireless # C51180. The # ETBC7L...
view full answer... - Recommended Hitch and Wiring Harness for a 2003 GMC Yukon XLI would be happy to help you set up your 2003 GMC Yukon XL to tow your 2016 Forest River SALEM CRUISE LITE 195BH. Without knowing what your current hitch's capacity is I can not say for certain you don't need to replace it. However, if you do want or need to replace it I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13422. This is a custom fit hitch that bolts onto your Yukon and has a 2" receiver opening. It has a maximum gross trailer weight of 6,000 lbs and...
view full answer... - Recommended Trailer Wiring Harness for a 2020 Chevrolet Bolt EVI do have an option for you but there are no confirmed trailer wiring harnesses for a 2020 Chevrolet Bolt EV. That said, I spoke to Curt and they said the best option is the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part # C59236 which is their universal harness used on most vehicles without plug and play systems available.
view full answer... - What Trailer Hitches Will Fit a 2011 Kia Sorento SXI have recently spoken to my contact at Draw-Tite regarding Trailer Hitch # 75684. He stated that there are no exclusions for the trailer hitches, except if the vehicle has dual exhaust, which means they should fit all models, including your 2011 Kia Sorento SX unless it has dual exhaust. I have included links to the installation instructions and video. If you plan on doing some towing, the recommended ball mount is # C45010 and you can use ball # 19260 (1-7/8 inch diameter) or # 19247...
view full answer... - What is Needed to Add a 7-Way Trailer Connector to a 2009 Audi A6 AvantThe Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector - Vehicle End - Ergonomic Design, # HM48470, can mount pretty much anywhere you want it to. The most common place is to the left (driver side) of the trailer hitch receiver opening. Based on the design of the trailer hitches for the 2009 Audi A6 Avant, if you were to install it on the bottom of the cross tubing of the hitch, it will be a little below the trailer hitch receiver opening. If this is too low, you can mount...
view full answer... - Trailer Harness for 2001 Ford TaurusYes, part # C55375 is the correct part for a 2001 Ford Taurus Sedan. If you have the Wagon you will want the # C59236 instead. We have video of a wiring harness install on a 2002 Taurus that will walk you through the install.
view full answer... - How to Connect 7-Way Connector on 2012 Volvo C30 with 4-Way Flat Connector on TrailerI spoke with my contact at Hopkins who said that technically the Adapter 7 Pole to 4 Pole # 47345 would work in-line with your 13-Pin to 7-Pole connector so that is an option, but if you plan on towing your trailer more than just a few times there are a few other options for you that would be better. The first option is to install a 4-Way Flat connector on your 2012 Volvo C30. For that you would need the Curt part # C59236. This splices into your tail light wiring and receives power via...
view full answer... - Installing Curt Wiring Harness # C59236 on 2008 Mercedes-Benz C300According to my research your 2008 Mercedes-Benz C300 has a combined stop and tail signal with an independent turn signal with pulse modulation. This means the signals are sent as pulses that need to be deciphered. When looking at the installation manual for the Curt Powered Tail Light Converter Harness # C59236 you will want to follow the directions for the "PWM-ST" vehicle wiring type. The green wire from the harness will go to the right turn wire (black/green on the vehicle), the red...
view full answer... - Trailer Wiring Recommendations for a 2010 Volkswagen TiguanThere are a couple of options for adding trailer wiring to your 2010 Volkswagen Tiguan. First, you can use the Curt Powered Converter, # C59236. I have included links to the installation details and a video of an installation below. Another option that will not require you to cut or splice into your vehicle's factory tail light wiring is the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT. This system keeps the 4-Way wiring harness separate from your vehicle's factory...
view full answer... - 4-Way Trailer Wiring Harness Recommendation for 2019 Buick EnvisionTo add trailer wiring to your 2019 Buick Envision you would need to install a universal style of trailer wiring like the Curt 4-way kit part # C59236 which installs by splicing into the taillight circuits of the vehicle. There isn't a way to use tow bar wiring in reverse like you asked about.
view full answer... - Parts Needed to Tow Trailer With 2001 Chevy CorvetteI can indeed list out all the parts you need to tow with your 2001 Chevy Corvette, which are the following: - Curt Trailer Hitch Receiver # C11034 - 4-Flat Wiring Harness # C59236 - Curt Drawbar # C45521 - Pin and Clip # F-4 - 2" Hitch Ball # C40018
view full answer... - Trailer Wiring for 2018 Lexus RX 350L Without Factory Tow PackageIf you are sure your 2018 Lexus RX 350L does not have the factory tow package then your only option is to hardwire a 4-way to your vehicle with a universal kit, the Vehicle Wiring Harness # C59236.
view full answer... - Everything Needed for a 1994 Ford Escort to Tow a Small TrailerTo equip your Escort for towing, you will need 5 parts. A hitch, ball mount, pin and clip or hitch lock, trailer ball, and a wiring harness to supply lighting for your trailer. I recommend the Curt Class I Receiver Hitch, part # C11105, with ball mount # C45520 and pin and clip # F-4. All you will need is a hitch ball, for that you can use part # 19256. For more security, you could use a hitch lock, part # e98879 in place of the pin and clip. To wire your vehicle for the trailer lighting,...
view full answer... - Hitch Ball Height of Stealth SH87FR Hitch Installed on 2019 Volvo XC90The receiver included with the Stealth # SH87FR hitch for the 2019 Volvo XC60 isn't meant for towing, it's meant for hitch mounted accessories like bike racks or cargo carriers. In order to tow, you'll need the # SH87FRT hitch kit which includes the ball mount that's meant for towing which provides a 2 inch rise which will place the top of the trailer ball around 18 inches which wouldn't be sufficient to tow your trailer so it's level. Unfortunately, this height isn't adjustable. I'd recommend...
view full answer... - Recommended Trailer Hitch for 2007 Dodge Ram 3500 Cab and ChassisThe Curt Class V Receiver Hitch # C15800 referenced in your question is confirmed to fit your 2007 Dodge Ram Cab and Chassis with a 34 inch wide frame. This is a heavy duty, Class V hitch that will provide a 2-1/2 inch receiver opening and a 20,000 pound towing capacity. I have attached the installation details for you to check out. Keep in mind that some drilling will be required. If you do not yet have a trailer connector installed at the rear of your truck, I recommend using the Vehicle...
view full answer... - Best Trailer Wiring Harness for a 2007 Infiniti FX35 Yes, the Curt Powered Tail Light Converter part # C56190 will work with LED tailights. Please note that your 2007 Infiniti FX35 could have came with either a separate or combined lighting system and depending on which one you have, the Curt Powered Tail Light Converter part # C56190 may or may not work for you. If you have separate lighting system then you can use the Curt Powered Tail Light Converter part # C56190 but if you have a combined lighting system then you will need to use the...
view full answer... - How far does the Draw-Tite Receiver Hitch Extend Below the Rear Bumper on a 2022 Acura MDX?I can confirm that the Draw-Tite Max-Frame Trailer Hitch Receiver item # DT42MR does not hang below the rear bumper trim on a 2022 Acura MDX. The installation instructions show a diagram of a 4 inch wide by 3.5 inch wide hole needing to be cut out of your bumper trim to allow access for the hitch receiver. Whether or not you replace the rear trim piece would be your choice. I have attached a link to the installation instructions. Then to add a 4-way on your MDX you'll need the Vehicle...
view full answer... - Recommended Wiring Harness For 1989 Volvo 760 Turbo WagonSince your 1989 Volvo has separate wiring(meaning the brake and turn signals are sent along separate wires) I recommend the Vehicle Wiring Harness Kit, part # C59496. To install this harness you will need access to the wiring behind each tail light. Starting on the left driver side, you will need to find a place to mount the converter box. Then, ground the white wire to a bare metal surface. Next, you can use the included circuit tester to check the wires until you find the one that...
view full answer... - Parts Needed to Add 7-Way to 2023 Hyundai PalisadeTo add a 7-way to your 2023 Palisade you will need to start with a 4-way. At this time, there are no plug and play 4-way options so you will need the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. This is a splice in harness. Once you install the 4-way you will need the Universal Installation Kit for Trailer Brake Controller # ETBC7. This comes with the adapter, wiring, circuit breakers, and everything else you need to upgrade to a 7-way connector. If you...
view full answer... - Trailer Wiring Harness Options for a 2004 Nissan XterraThe Curt wiring harness # C55244 is meant as a replacement for a 2003 Nissan Xterra that already has a factory 4-Way. If you just need to replace the factory 4-Way this is the harness that you would use and nothing else is required. If the vehicle did not come with a factory 4-Way then you would need a different harness like # C59236 which is a hardwire powered converter. I have included a link to the installation instructions for you.
view full answer... - Trailer Hitch and Bike Rack Recommendations for a 2022 BMW X1Thanks for reaching out! I recommend using the Hidden Hitch by Draw-Tite Trailer Hitch Receiver # DT54YR for your 2022 BMW X1 because it has a hidden crosstube and a removeable receiver so your BMW has a complete OEM look when you aren't using your bike rack. I also recommend installing the Curt Wiring # C59236 and securing the 4-Way near your hitch receiver using the bracket # 18144. Having the wiring kit installed then enables you to use the Kuat Piston Pro X # KU98VR which is arguably...
view full answer... - Recommended Trailer Hitch Receiver For A 2024 Kia Seltos For a 2024 Kia Seltos we currently only have one option available, the Curt Trailer Hitch Receiver # C65FR. This hitch has a 1-1/4" receiver tube so you'll need to remove the 2" adapter from your Thule DoubleTrack Pro XT Bike Rack # TH92BJ in order for it to fit. There's a little screw that you can remove with an Allen wrench to slide the adapter off of the shank. The hitch has a 200lb tongue weight capacity and 2,000lb towing capacity, but you'll want to refer to your owner's manual for...
view full answer... - Troubleshooting Steps When Trailer Lights Stop Working After Turning on HeadlightsWe can absolutely help you with this issue. First, check the ground wiring on both the trailer side and the vehicle side. Typically when the lights work on the trailer initially but then malfunction once you turn the vehicle lights on it means that there is some sort of issue with the ground on the trailer wiring. Check to make sure that where the ground wire is connected to the trailer is clean and free from paint, debris/corrosion and fully connected; you'll also want to make sure no...
view full answer...
- Parts Needed to Install a Trailer Brake Controller in a 2009 Volkswagen PassatYou can certainly add a brake controller to a 2009 VW Passat but you may not need to. We normally recommend a brake controller if the gross trailer weight is 50 percent or more of the vehicle weight. Since the Passat does not have that high of a towing capacity (check the owners manual for exact numbers) it may not ever reach as high as 50 percent of the vehicle weight. But if you want to go ahead and install a brake controller you will first need to install a 4-Way wiring harness using...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Video Edited:
John S
Video by:
Kathleen M
Video by:
Zach D
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Ethan H
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Kristen H
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
5/16/2023
You will need to double check and make sure that your ground wire is attached to a clean metal surface. If you are grounded properly, and still have no lights, then you will want to test the converter box itself. If you are receiving power to the box and nothing out of the box, then it is possible that you have a defective box.