7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
Item # HM40975
Our Price: $36.62
Confirmed to Fit
2007 Chevrolet Silverado New Body
with factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (2351)
- Q & A (0)
- Photos
2007 Chevrolet Silverado New Body - 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Custom Fit
- Trailer Hitch Wiring
- 7 Round - Blade
- 4 Flat
- No Converter
- Hopkins
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your Chevrolet Silverado New Body's OEM wiring system and mounts with included bracket.
Features:
- 7- and 4-Pole trailer connector with mounting bracket
- Has high-impact, ABS plastic construction
- Stainless steel spring for easy cover operation
- Rubber gasket provides weather-resistant design
- Includes mounting bracket for easy, snap-in socket installation
- Black, epoxy-coated steel construction
- Mounts to bumper with included screws
Specs:
- Application:
- Replaces factory 7-way connector on Chevrolet, Ford, GMC and Nissan trucks and SUVs
- Can be used to add a connector to 2003 and newer GM pickups and SUVs
- Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep
- Distance between mounting holes (center to center): 2-3/8"
- 1-Year limited warranty
Note: Only one connector - a 4-way or a 7-way - can be used at a time because the covers on this socket will not open far enough to allow use of both plugs at the same time.
Similar to 11775, PK11893
40975 Hopkins 7- and 4-Way Trailer Connector Socket with Mounting Bracket - Chevrolet Silverado New Body End
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End - HM40975
Average Customer Rating: 4.8 out of 5 stars (2350 Customer Reviews)
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.by: Michael07/12/2023
The box arrived opened and damaged. My wiring harness was missing. When I called to tell them my wiring harness was missing they told me that it was shipping separately but could not tell me when it would arrive. I later got an email telling me all of my items were delivered and asked me to leave a review. I still don't have my wiring harness and will not have the hitch installed by this weekend like needed because I don't know if I am ever getting my wiring harness.not to mention the box had no padding around the hitch so it's all scratched up.
by: 2006 Silverado 2500HD08/03/2023
Worked exactly how described, great replacement for my risty only bracket and 7 pin connector. Fits my 2006 Chevy Silverado 2500HD perfect, plug and play. Bought specifically because the bracket is included. And with both 4 and 7 pin connectors, I don't have to use an adapter anymore!
by: Jason06/24/2023
I am not sure how this bracket passed quality control. It sure is a good thing I'm not planning on using it. Really disappointing to see how quality is overlooked during the packaging process. This should have never left in this condition.
Jenny N.
6/30/2023
Oh! It is definitely not how we want the bracket to arrive to you. I will have our Customer Service team reach out.
by: Jim04/17/2024
It was easy to install and took care of the issue I had of one of the trailer light segments not working.
by: James 02/28/2023
2021 Chevrolet Silverado 1500
Easy installation and very helpful installation video.
James
3/8/2024
One year later and no issues
by: William 05/06/2024
took longer to remove the factory cover than to instal the connector. worked as advertised. I would buy this again if ever needed
by: Ali 12/30/2022
This thing couldn't be better. Easy mounting. Plug and play. I can now connect any trailer I want. Love it, love it, love it!
Ali
1/7/2024
This was a major upgrade for me at the time. A year later, Ive hauled massive loads across the country, and this connector harness works perfectly every time
by: Brad 04/11/2024
I bought this because I needed the bracket and it was the quickest way to get it they do not stock the bracket alone. We where installing tommy lifts and needed t move the original connector which was installed on the bumper.
by: Ron P03/17/2014
2014 Chevrolet Silverado
Here's some snaps of my Hopkins #40975 installation. I can confirm that it's an identical replacement for the 2014 Silverado 1500 trailer-light blank insert, no bracket required. It took me 30 seconds to plug the Silverado's OEM 7-pin round connector (located inside the blank insert) into the #40975 Wiring Kit and snap it into the cutout. Then I tested the flat 4-pin outlet of the #40975 with a 5 dollar 4-pin LED tester from West Marine, and all light functions tested good. Shweet! To remove the OEM blank plug, it helps to reach behind it and pinch the two spring clips holding it in place... same with the #40975 if it needs to be removed for some reason. When I ordered the part from eTrailer, your site had a comment, "This will not fit your vehicle. See below for compatible parts," or words to that effect. Maybe take a look at that and remove the comment, as the #40975 is an exact fit for 2014 Silverado 1500, no bracket needed. Thanks, eTrailer team!
Ron P.
3/19/2015
Although I havent towed since installing the Hopkins Pollak wiring kit since I installed it a year ago, I have tested the 4-pin connector for proper function using a 4-pin LED tester from West Marine and it checks out okay. Recently I inspected the kit for water intrusion mentioned by one of the raters, and I found no evidence of moisture inside the dual-connector compartment. On installation, I did make liberal use of the dielectric grease that accompanies the kit. Good product, easy installation, and great price.
by: Mike07/15/2023
7 and 4-Pole Trailer Connector Socket does not fit my towing vehicle.
Today I just received my etrailer order #114979486, that consisted of: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector (ITEM # C56431) and 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End (ITEM # HM40975) for my 2020 Ford Ranger. I easily installed the harness, but the Trailer Connector Socket does not seem to fit on the rear bumper, next to the license plate.
Last week, I chatted with etrailer customer support rep and I was assured that the connector Socket (ITEM # HM40975) would fit on my 2020 Ford Ranger.
This etrailer customer support representative referenced a previous Q&A Topic titled, "Can the HM40975 be used on a 2021 Ford Ranger". I was also assured that 2020 and 2021 Rangers have identically constructed rear bumpers.
Today, I spoke with a different etrailer customer support representative. This rep told me 7-Way Trailer Connector (ITEM # C56431) was not compatible with the 2020 Ford Ranger recommend reaching out to the manufacturer directly for more information.
I'm very frustrated!!!! Can I please get a solution to this issue ASAP.
Jenny N.
7/19/2023
I am sorry that this has been a frustrating experience, however I do have an answer for you. The Hopkins connector part # HM40975 is technically not a fit on its own for a 2020 Ford Ranger. The short reason why is that the Ford Rangers do not have the round US Carr type of connector to plug into. Now by adding the Curt harness part # C56431 like you did, does make that round connector that you can plug into the back of the Hopkins connector that will give you the 7 and 4 way you want. Since it is using two different manufacturer products together, I do encourage you to test the 4 and 7 way to make sure all the signals are working correctly. In theory they work together, however they are not tested. The issue is going to be that the bracket that comes with the Hopkins connector is not going to match with anything on the Ford Ranger to connect to. It would just be bolted to the bumper or you could also consider using part # C57202 to install it on your hitch.
by: Mark 03/20/2024
2018 Chevrolet Silverado 1500
Item received as described. It was simply plug and play. Out with the old, and the new was an exact replacement. Very satisfied.
by: Dennis 02/08/2024
2010 Ford Van
This dual connector adds a professional looking touch to our tow wiring installation
by: Matt W07/07/2018
2017 Nissan Pathfinder
It came with it's own bracket, which is a plus. It was compatible with etrailer.com's part number C56357, which is also a plus. The self tapping screws being the only hardware coming with the item was a disappointment. I just installed etrailer.com's part number 76301 hitch receiver which has a mounting plate for brackets like this. The self tapping screws, which might have been effective, wouldn't have looked "professional." After finding some hardware which worked, it went on smoothly and fits well with the rest of the assembly.
Matt W.
7/7/2019
This product has been working well for the past year. I feel this was a smart purchase.
by: Rob09/22/2018
2015 Audi Q7
Scratched my head for a while, trying to find a quality way to connect this vehicle end 4/7 wire socket to my trailer ready (almost) 2015 Audi Q7. Finally decided that it really didn’t need to be bolted, but could be hose clamped to the existing heavy duty Audi bracket.
Mounted it sideways with a 1” diameter and a 3” diameter hose clamp. Be sure to use a 3” clamp with lots of serrations that all it to tighten it down a lot.
You’ll need to drill out the small hole of the supplied bracket to allow a clamp to fit through it. The other hole is a slot, and works unaltered. Small clamp on bottom, large clamp on top.
You’ll also need to relieve a small spot on the trim piece to make room for the 4-wire door to o-en freely. This is marked as red on one of the pictures.
Looks good and should work good!
Rob
9/22/2019
Good installation approach for q7’s. Keeps water from collecting in wiring junctions.
by: Bert 03/28/2024
The self tapping screws that come with the mount are junk,
The product is Good.
by: Lonnie04/08/2024
Great product, it was just what I was needing to complete my project.
by: Steven 04/21/2024
2022 Nissan Titan
Came in on time. The parts were in good shape and fit perfectly.
by: Doug 11/02/2022
Fit and works fine. My old one was just the 4 plug so now I don’t have to use the adapter for 7 prong anymore.
Doug
11/3/2023
Works fine- no issues.
by: RT12/13/2023
A very good option to cut down on rattle. This is a durable product that is fairly simple to install. My only complaint is the magnet to keep cover closed when not towing should be stronger. I am happy with the purchase and it looks like it will be useable for years.
by: Guy05/22/2022
2003 GMC Sierra
Top quality trailer connector that fir original wiring harness perfectly.
Installed in under 15 minutes.
John C.
7/26/2022
Works great and looks great. Get compliments on the hitch.
by: Warren 04/25/2023
2005 GMC Sierra
Fast shipping. Nice quality product
Warren
4/26/2024
Products still working great.
by: James 08/07/2023
This was a drop-in. Literally unplug the wiring harness off the blank, pop out the blank, pop in the new connector assembly then plug the wiring harness back into the connector. Honestly took less than 4-minutes. Awesome product. My local hitch install company wanted $150 just for the install of the connector.
by: 1957okie04/03/2014
Great product at a great price. It was an exact fit and looks great. I like having the ability to plug in my 7-prong plug on my travel trailer or the 4-pin plug on my boat, without needing an adaptor. Got super fast shipping too. Buying from etrailer.com was a win- win-win.
Bob R.
5/31/2014
What year is your silverado
Rachael H.
6/4/2014
Randy S.
6/6/2014
Its a 2014 Silverado 1500 Double Cab
by: Gary10/01/2023
2005 Chevrolet Silverado
Super fast shipping easy installation looks better than factory plug love the 7way and 4 way so no more dealing with adapters
by: D-RAIL02/04/2024
2001 Chevrolet Suburban
Really impressed with the Hopkins product overall. Seems very sturdy, and the install was very straightforward. Would certainly recommend this plug, and etrailer to anyone in need.
25
2351
Show More Reviews
See what our Experts say about this Hopkins Custom Fit Vehicle Wiring
- Why Does Surge Brake Actuator With Electric Lockout Work on One Truck But Not the OtherWhat is happening here is that your surge brake actuator with an electric lockout uses the reverse light circuit to activate the electric lockout. So the issue is that circuit on your 2014 Ford F-150's 7-way has been somehow corrupted. Start by checking a relay in cavity 39 and a fuse in cavity 43 under the hood. You can verify this with Circuit Tester # PTW2992, and it may be as simple as the center pin (reverse light pin) on your Ford's 7-way being corroded, so you can either clean...
view full answer... - Recommended Replacement Molded 7-way Trailer Plug and Cord The Epicord # 277-000143 7-way plug you'd looked at would indeed make a better connection than something like the # H20044 that just has the single contact. Keep in mind, the wire color coding on this plug/harness might be different than what you already have, so be sure to look at the chart on the # 277-000143 product page that lists the wire colors and their purpose. Are you having issues with the plug not staying fully seated? Because the spring loaded lid for the trailer connector...
view full answer... - Replacement 7-Way Trailer Connector for 2015 Ford F-150It sounds like you have the factory 7-way on your 2015 Ford F-150 and only want to replace the cable that connects your 7-way socket like # HM40975 to the tow package wiring. If you are willing to hardwire in your socket you can get that with the 4' Pigtail Wiring Harness # PK11998. You would also need Heat Shrink Butt Connectors # DW05745-10. I have added a link to an install for you to check out. Otherwise, you can simply replace your entire 7-way with the Curt T-Connector Vehicle...
view full answer... - Wiring 7-Way Trailer Connector After Installing OEM Brake Controller in 2014 Ford F150If by 'OEM Socket', you mean something like the # HM40975, you'll need to obtain a new harness from Ford to connect the trailer connector to the connector on the driver's side frame rail. You'll be all plug and play from there. If you're speaking of an adapter like # 37185, you can certainly run your own circuit from the blue brake controller wire if need be, but you might not have to. Go to that connector that you plugged your OEM trailer connector and follow it to the junction which...
view full answer... - Recommended Trailer Connector for 2020 GMC Sierra 1500I'd recommend the # HM40975 which would provide both a 4-pole and a 7-way connector. This is what GM uses as the OEM trailer connector. The HM40975 would plug into the round US car connector that is plugged into the knockout next to the license plate. remove the knockout, unplug the socket from the rear of the knockout and plug the connector into the socket on the back of the # HM40975. The connector I recommended includes the mounting bracket and mounting screws, although your truck should...
view full answer...
- Trailer Lights Not Working On Multiple Trailers With 2005 GMC Sierra 1500It definitely sounds like an issue with your 7-way connection or the wiring that leads to it on your 2005 GMC Sierra 1500 Z71. I recommend using a Circuit Tester # PTW2991 to begin checking the poles of the 7-way on your Sierra. First make sure to check your fuses and relays that are under the hood and in the cabin for any that are damaged. The circuit tester can help with that task as well. Once all the fuses and relays are checked begin checking the poles on the 7-way. If you find...
view full answer... - Is There An RV Socket Wiring Harness That Fits A Ford F-250 With Quick Connect Plugs?The Ford F-250 and F-350 Super Duty Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End, # HM40975 is a fit for your vehicles that have the factory wiring. If your Ford F-250 doesn't have the factory wiring, the 4 foot Pigtail Wiring Harness for Pollak Replacement 7-Pole RV Socket, # PK11998, will give you the connection you need, but there isn't a quick connect plug that makes that connection. You can get both the connector and the wiring harness together...
view full answer... - Replacement Bracket for OEM Trailer Connector on 2007 Ford F250Unfortunately, your photo didn't make it through on our end. Ford has used the # HM40975 as the OEM trailer connector for quite some time, is that what you're speaking of? If so, a replacement bracket is indeed available as part # HM40978. If this isn't what you're looking for, please reply and I'd be happy to help.
view full answer... - Replacement Bracket For Hopkins 7 and 4-Pole Trailer Connector SocketThe Replacement Mounting Bracket # HM40978 is the only bracket we have to fit the Hopkins 7- and 4-Pole Trailer Connector Socket that you have on your 2013 Toyota Tundra. As the bolt holes will not match what you have the No-Drill Mount Bracket # 18136 can be used to secure the connector to the receiver without drilling.
view full answer...
- 7-Way Recommendation for 2007 Ford E-250 For Installing Brake ControllerIf you have a round trailer wiring connector at the rear of your 2007 Ford E-250 like the versions of the vehicle that have the towing package have then you'd want the part # HM40975 which will plug right in. Then to install a brake controller you'd only need the correct install harness part # 3035-P. For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup....
view full answer... - Parts Needed to Flat Tow a 2003 Jeep WranglerIn order to flat tow your 2003 Jeep Wrangler there are a number of parts you'll need, including a tow bar. The first thing you need to get are base plates for the Wrangler, and that will depend on the type of bumper you have. For example # RM-035-1 if you have 1 inch D-Ring bumper mounts or # RM-521424-4 if you have a Double Tube bumper. I have added a link to our page with the base plates that work with a 2003 Wrangler so you can find the one that works for you. The tow bar you need,...
view full answer... - Recommended 7-Way and 4-Way Trailer Wiring Connector Compatible with Factory HarnessFor your 2002 Ford F-250, the wiring harness you are seeking with both 7-way and 4-way connectors is the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors # C55774 or the Reese # 74682. Either of these will connect to your factory wiring harness to give you both of the trailer connectors you seek.
view full answer...
- How to Install a 7-Way Trailer Wiring Harness on a 2007 Ford F-350I do have everything that you need to add a 7-way trailer wiring harness to your 2007 Ford F-350 but it sound like the factory trailer wiring on your truck has been modified so I would need you to check a few things in order to make sure we get you the correct parts. The first thing you are going to want to look for is a US car connector pigtail which I have attached a photo of your you. If you have this then all you will need to install a 7-way trailer connector is the 7- and 4-Pole Trailer...
view full answer...
- 7-Way Trailer Connector Recommended for 2019 Dodge DurangoYou can add a 7-way trailer connector and complete the brake controller wiring by using the Tekonsha OEM 7-way harness, part # TK22113. The harness plugs inline at the connection point between the taillight assemblies and the taillight wiring harnesses on the driver and passenger side. The body harness would be routed under the passenger side of the vehicle to the battery area where the black and red wires connect to the positive battery terminal. The blue wire in the harness connects...
view full answer...
- Will Pollak HM40975 Replace OEM 7-Way/4-Pole Trailer Connector on 2005 Ford F-350The Pollak # HM40975 is the identical 7-way/4-pole trailer connector Ford uses for their OEM trailer connector on later model F-series trucks so it would indeed be a direct replacement, as long as your truck has the round US CAR connector behind the rear bumper. I've linked to an installation video.
view full answer...
- Replacement 7-Way Trailer Plug Needed for a 2007 Chevrolet Silverado PickupIf you have the 2007 Chevrolet Pickup, Silverado New Body style, like the one in the video link below, then the Twist-in, 7-Pole, RV-Style Trailer Connector for Chevy and GMC Vehicles, item # PK11916, is the correct replacement. If you have the 2007 Chevrolet Pickup, Silverado Classic body style then the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket, item # PK11893, is the correct replacement for your vehicle. The Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting...
view full answer...
- Parts Needed To Add a Factory Style 4-Way/7-Way Connector On 2019 Toyota Tacoma Without Factory TowFor your 2019 Toyota Tacoma you will be able to plug the Hopkins Connector # HM40975 to the Tekonsha OEM Replacement Vehicle Wiring Harness # 22117. This Hopkins is the same as the 40974 but comes with a mounting bracket which you will not use. The connector which comes with the Tekonsha uses the same OE style connector as the Hopkins so there is no additional wiring adapter or splicing required. The Redarc Tow-Pro Liberty Brake Controller # RED24FR can be mounted in one of the open slots...
view full answer... - Parts Recommendation for Adding 7-Way to 2022 Ford Transit T250I like the way you think! To get everything you need in a nice bundle I recommend the Tekonsha OEM Replacement Wiring Kit # 22114. This tees in behind the tail lights on your 2022 Ford Transit T250 and then comes with everything to get you that fully functioning 7-Way. It even includes a brake controller harness that fits directly to a Draw-Tite, Reese, Pro Series, or Tekonsha brake controller like the popular Prodigy P3 # 90195. To get the most out of your wiring setup I recommend also...
view full answer...
- Troubleshooting Power to Brake Controller from #2 Stud on 2011 Chevrolet SilveradoSince you know the brake controller works when connected to stud #1 it should not be a brake controller problem. From what I have found, stud #1 is dedicated 12V power and a 40 amp fuse, you do not want to keep the brake controller attached to this. Troubleshooting this issue directly would require working with the fuse box wiring, which is not something I would recommend. Instead, I recommend running new wire to the battery from your brake controller. Take the wire from your brake controller...
view full answer... - Does 12 Volt Circuit of 7-Way 2006 Holiday Rambler Neptune Need to be Active for Brake ControllerYou actually don't have to have the 12 volt accessory circuit active on your 7-way for the brake controller to function so you wouldn't necessarily need to connect that if you didn't want to for this specific controller. If you had a battery on the trailer you wanted to top off while travelling you could bypass the vehicle wiring and run that circuit by itself with 10 gauge wire like part # 10-1-1 which we sell by the foot through a breaker like # 9510.
view full answer... - Trailer Light Wiring Diagram for 7-Way on a 2019 Chevy Silverado 2500According to my research the following wires for the 7-Way on your 2019 Chevy Silverado 2500 should carry the following functions: Green OR White/Green - Reverse White - Ground Blue - Brake Controller Green OR Green/Purple - Right Turn/Stop Red/Black OR Red/Green - 12V Power Brown OR Gray/Brown - Running Lights Yellow OR Yellow/Gray - Left Turn/Stop The reverse light function green wire should be slightly larger than the green wire for the right turn/stop function (if you have the 2 green...
view full answer... - Troubleshooting Trailer Brake Lights and Turn Signals Not Functioning on 2000 GMC SierraFirst thing you should do at this point is test the 4-way of the wiring harness with a circuit tester part # PTW2993 for voltage on all of the right pins when the taillight signals are being applied. Just like in the video I attached. If the voltage checks out there but the trailer lights still don't function right then the problem is on the trailer wiring. That would mean that problem is either due to a ground issue or a short issue. Make sure that the trailer side connector is clean...
view full answer... - Troubleshooting Truck Bed Slide In Camper Marker LightsThe fact that you're getting 'bleed over' from one function to the other indicates a ground problem. Check all the ground connection on the plug that joins the camper and the truck, and the harness on the truck that connects to the tow package wiring. Somewhere you have a loose ground connection. I'll link you to a help article about troubleshooting trailer wiring. The article is about towed trailers, but the same advice outlined in the article would hold true for a truck bed camper like yours.
view full answer... - Replacement 7-Way Trailer Connector for OEMWithout knowing what vehicle you have the 7-way connector on, I can give you a few options to choose from. You mentioned having and OEM connector, so that means you will have a US car adapter socket and can use: Mighty Cord Replacement 7-Way RV-Style Trailer Connector for Factory Tow Package # A10-7072VP Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket - Vehicle End # PK11893 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End # HM40975 which is my personal...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Joe B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Adam E
Test Fit:
Matthew B
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
John S
Video by:
Andrew K
Video by:
Alan C
Video by:
Zach D
Video by:
Jonathan Y
Video by:
David F
Video by:
Aidan B
Video by:
Thomas T
Written by:
Tyler C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
8/3/2023
I am sorry to hear that your order arrived in this condition. I see that our customer service department is currently working on a solution for you.