ATV Winch Mount

For a 12,000 lb. electric car trailer winch like the Bulldog Winch Trailer Winch part #BDW10040, I recommend a standard 12 volt lead acid battery rated up to at least 650 cold cranking amps (CCA). As long as the battery is rated up to 650 CCA then…

The Bulldog Winch Snatch Block #BDW20049 does not technically have a minimum wire size, but it does have a maximum wire diameter of 3/8". This would likely work fine with your 5/32" wire #BDW20102, however, a more appropriate snatch block…

There's crossover; the 15123 and LM67048 have the same inner diameter, so they fit the same spindle, and often hubs fit both 5,200 lb and 6,000 lb axles. So you are perfectly okay with what you have and the correct replacement bearing kit for…

Good question. The Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs part #DL14725 is rated to hold 58 feet of 9/32" cable. That cable has a diameter is 3 times that of what you intend to use on it with the 3/16.…

Great question! I believe that you're wanting to extend that handle out horizontally so that you aren't having to 1 - get on your hands and knees while operating the winch, and 2 - having to keep removing and installing the handle because it…

The socket/drill adapter part #DL6456 that you referenced only fits worm gear style winches like the #DL11011 from Dutton Lainson and would not fit the winch part #DL14725.

A tree or stump is not a recommended place to mount a winch. Normally in these situations, people mount the winch on a steel post that is held in the ground with concrete in order to support the weight. You would need to make sure the winch pays out…

Bright Way actually has a replacement plunger for their Breakaway kit par #3802311 that you have with the part #3802350 which does happen to look very similar too the Fastway replacement plunger part #FA80-01-2206.

Thanks for the photos they were very helpful, and the answer to your question is yes, the Power Grip 90-Degree Locking RV/Marine Power Cord with Handle - 50 Amps #CAM55572 will abslolutlely work for what you are trying to do. There isn't a cord…

Yes, you will be able to use Timbren suspension enhancement on your 2019 Ford F-250 with a weight distribution hitch. I see you are looking at the System #TFRTT350J which is their severe duty kit. This is best used on vehicles which will always have…

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

I believe you are asking how to remove the shower door part #PF267001 from the shower box without damaging the frame of the shower box. There should be a pin with a spring on either side of the door. If you can compress those pins in the door, you…