The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Yes it is possible to put a platform rack on your 2024 Toyota RAV4 with the panoramic roof, and the Yakima LockNLoad is a great choice. Fitment will just depend on what kind of rails are on the roof of your car. For factory flush mounted rails you…
Hey Alex! The legs on the Front Runner Roof Rack item #FR45MJ are adjustable between 2.9"-3.3" tall. The load bars are just under 1" thick. Together they are going to sit 4.25"-4.65" tall above the OEM rails. I do not know…
Hello Cory. The difference between the two is that the Air Lift LoadLifter 5000 #AL88399 has an internal jounce bumper (bump stop), and the Air Lift LoadLifter 5000 #AL57399 does not. Both products have a 5,000 pound load leveling capacity, and are…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Hey Isaiah, thanks for reaching out! I recommend the etrailer Trailer Hitch Receiver #e98912 2025 Subaru Crosstrek simply because it has a matte black finish that offers a better look and protection over the glossy black finish we see on the other…
Hey Jefry, for your 2020 Honda Accord Sport you can use the Curt Trailer Hitch Receiver #C11525 with the Draw-Tite Drawbar #3593 and the 2" Hitch Ball #19258. This hitch has a bolt-on design as well as a 2,000 lb capacity which should be plenty…
Hello Rege, thanks for reaching out. It sounds like you are definitely on the right track with your thinking and with your assessment and comparisons of the products you mentioned. For the 5th wheel hitch, the Demco Auto slide #DM29GV and the B&W…
The mounting bracket to actually attach the Hood Latch #PLR284 to the vehicle is included but the keeper end bracket (to secure the latch) is not. This can be added with part #PLR281.
Hey Dan, for your 2024 Ford F-350 that has the OEM pucks the correct Pullrite sliding hitch you need is the part #PUL73RR. The #PUL63RR fits the standard above bed fifth wheel rails that are 22 inches apart on center. What fifth wheel do you have?
The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…
Filter Results
