Hey Jim, for that weight trailer and your 2004 Ford F-250 I would recommend the Equal-i-zer kit part #EQ37140ET which has a tongue weight range of 1,100 lb to 1,400 lb and is widely considered the best WD and sway control around so this will work…
Each of the fans of the Flex-a-lite Dual 13-1/2" Electric Radiator Fans w/ Shroud #FLX295 can flow up to 2,300 CFM. Also worth mentioning is that the likelihood of one of the fans failing is very low.
I believe the tail lights you have are the TecNiq T60 lights which are industry standard 6" oval recessed lights. To replace those you can use the Optronics Fleet LED Trailer Tail Lights #TLL12RK. If your lights look different than this please…
Hello Jeremy, thanks for reaching out. The Air Lift Air Helper Spring Cradles #AL59DQ will only work with the Air Lift brand bellows-style air bags. They will not work with the Firestone air bags.
In regards to the Derale Thermal Fan Clutch with Reverse Rotation part #D22140, the distance from the mounting surface to the end of the shaft is 1-13/16" and the distance from the mounting surface to the end of the clutch is 1-3/4". I went…
I spoke with my contact at Derale and he informed me that a Derale 12 inch High-Output, Electric, Single Radiator Fan #D16925 can withstand air temperatures of up to 300 degrees and is 12 inches in diameter. Based on everything you need I think this…
I went out to the warehouse and measured the total depth of the shroud for the Derale #D16925 at 1-1/2". To use this as a puller fan you would reverse polarity and would need to use a custom shroud, as the included fan has to many openings to be…
While the Derale 12" High-Output, Electric Radiator Fan #D16925 is intended to be a pusher fan only unless a custom shroud is made you could reverse the direction of the fan if you reversed the polarity.
Hello Bob. We do have a good gas detector option for you, but the lp gas detector model 7719 is currently unavailable. What I recommend instead is the RV Propane Gas Detector #RS44FR. This is a pretty standard gas detector. Just keep in mind the…
For your 2007 Dodge RAM 3500 HD Flat Bed Crew Cab with dually chassis there is not a B&W trailer hitch receiver available. Instead, I recommend you use the Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" #41936…
Thanks for the photo and while we do have a solution for you there is not a direct plug-in option for your 2004 Ford F-350 with a factory 7-way. What you can do is install the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole…
