What our customers are saying:
Very broad selection and outstanding service.
Mike
Eagan, MN
Videos
for Catalytic Converters
Help Articles
Expert Answers
For your 1996 Chrysler Intrepid we have the Drivers Side Front #MF50205 and Passenger Side Front #MF50204 direct fit catalytic converters. These will fit both the 3.3L and 3.5L engines. We do also have the Rear Converter #MF23286 for the 3.3L and the…
Generally speaking no, the direction of exhaust gases does not matter when passing through a catalytic converter like the MagnaFlow Stainless Steel Catalytic Converter part #MF23882. If the direction of flow does matter then it will be stamped onto…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Since the Westin Grille Guard came off of a 2000 Ford F-250 that means you have a #45-0220 and the correct bracket kit would be the part #40-022PK.
We do have replacement hardware for the Curt #13650. The bolts are easy to come by, but since you need the square hole spacers you'll have to get the entire kit. What you need is the Replacement Hardware Kit for Trailer Hitches #RHK. Enter the…
If your 2007 Jeep Commander was equipped with a factory tow package there is going to be a wiring connector on the inside of your driver side rear bumper that our part #118381 plugs into. If you have that connector then this is the part you need for…
I believe the connector you found is the connector you will use to plug in the wiring for your 7-way connector. There should be a wiring connector along the drivers side frame rail at rear of truck between the rear wheel and the rear of truck (see…
For your 1998 Ford F-150 Extended Cab with factory 4-way flat, you need the Tekonsha Ford Replacement OEM Tow Package Wiring Harness, 7-Way #118242. This will give you the two additional relays needed as well as the wiring harness. Then you will need…
The Buyers Products Hitch Plate part #3371809061A is a universal weld/bolt-on hitch plate. That said, the dimensions are geared towards Ford F-350/450/550 trucks so if this is what you have it would be a great option.
For your 2021 Forest River 2883WS I would recommend a hitch mounted cargo carrier over a bumper cargo carrier, as Forrest River does not recommend mounting anything the the bumper although people have done it in the past with no issues. Because of…
I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…
Search For Custom Fit Nissan 350Z AccessoriesSelect A Category Below
Towing
Nissan 350Z Trailer Wiring
Nissan 350Z Brake Controller
Nissan 350Z BOLT brand vehicle and hitch locks
Cargo Control
Nissan 350Z Roof Rack
Performance Accessories
Nissan 350Z Air Filter
Nissan 350Z Exhaust
Nissan 350Z Performance Chip Tuners
Nissan 350Z Vehicle Lights
Nissan 350Z Tire Chains
Nissan 350Z Fluid Filters
Nissan 350Z Catalytic Converters
Nissan 350Z Vehicle Engine Heaters
Nissan 350Z Radiator Fan
Nissan 350Z Lift Assist
Vehicle Trim
Nissan 350Z Floor Mats
Nissan 350Z Vehicle Covers
Nissan 350Z Vehicle Seat Covers
Nissan 350Z Replacement Mirrors
Nissan 350Z Windshield Wiper Blades
Nissan 350Z Windshield Covers
Nissan 350Z Vehicle Air Mattress