Jeep Wrangler 4xe Jeep Hardware

The Bestop Element Upper Doors, part #B5179515, that you referenced does fit a 1993 Jeep Wrangler, but it does not fit the 2009. The proper part number for the 2009 is #B5180535. This is for the upper door. If you need the full door, we have that…

The Saris Swing Away Hitch Extender for Bike Racks #SAR36VR has an overall capacity of 250lbs (rack and bikes) so it could technically accommodate two 85lb e-bikes as well as a rack, but the bike racks confirmed to be compatible with this extender…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

So the internal dimensions of the Torklift box part #TLA7700L that you referenced are 11-3/4 inches deep which is another way of saying tall. So since your battery is 11.02 inches tall this would easily be compatible. Since your width is 7.28…

The closest to 4 inch round lights we have is the Optronics LED Trailer Utility Light #BUL43CB or Trailer tail Light #STL55RB which are actually 4-5/16" diameter x 1-15/16" thick.…

The correct fitting BullRing tie-downs for your 2021 GMC Sierra 3500 are new, which is why they've been hard to find until now. You'll need the BullRing Stake Pocket D-Rings #BU94VR.…

If all you want is to prevent the 12 volt power supply of your trailer battery wiring from backfeeding onto your vehicle wiring or vice versa what you need is a one-way diode like part #RM-690. This only allows current to flow in one direction so…

I have two options that will allow for you to securely attach a cooler to your Curt Cargo Carrier part #C18151. You can choose from either a cargo net or a set of cambuckle ratchet straps. A cargo net such as the Curt Stretchable Cargo Net part…

If you are okay with drilling into the floor of the box your best option would be a cable lock like part #e98891 that you could route through the floor of the box around the cargo carrier and then back around the top of the box to lock it shut as…

You can make the Global Link RV Baggage Door Slam Latch #295-000078 work by using the Global Link Mounting Plate #295-000017 and building up a little bit of a frame between the mounting plate and inside of the compartment door. I actually did this…

We have the perfect solution but the Furrion Vision S W is not compatible with the pre wiring from Voyager. Instead the Voyager WiSight Wireless RV Backup Camera #ASA24YR is the way to go. This will allow you to use the already existing bracket to…

The pre-wiring of Furrion pre-wired RVs is basically just two wires as well as the Voyager harness like part #PSVCWVCMS130AP. One wire is the power wire which is the running light circuit and then the other is the ground so it really would just be…