Custom Fit 2022 Tesla Model Y Accessories

Hey Anthony, It looks like there's a proprietary pigtail wire harness (p1072586) to connect to the factory plug behind the trim on the driver's side and the brake controller's wire harness. From what I can find some people say that…

Hey Patrick, since your trailer wiring port isn't active you could take it to a Tesla dealer to have that port activated or you could install the Tekonsha part #TK92VR which would bypass that and instead installs by installing inline with the…

Hey Seanann, There is room for a 7-way on your 2023 Tesla Model Y with the EcoHitch Invisi Trailer Hitch Receiver #EH39FR, but you'll need a longer 7-way bracket to attach to the hitch beam and go past the receiver, the Bracket #18136.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Shirley, the anti rattle hitch lock part #HLT would work on a Tesla Model Y and won't interfere with the electrical box but it would only work with a Kuat Transfer bike rack. Is that what you have or are you looking for a hitch lock that is…

If you have the Kuat Transfer V2 Bike Rack for 2 Bikes #KU84FR then the correct add-on to convert it to a 3-bike carrier is 1 Bike Add-On for Kuat Transfer Bike Racks #KU57FR.

Yes. You can make connections to the battery on your 2020 Tesla Model Y in the same manner that you would on a standard, non-EV. You will need to start with a 4 way like the Tekonsha ZCI Kit #119250KIT which offers you a solution that doesn't…

The Hidden Hitch part #DT58MR that you referenced does not require any drilling to install and would only require some minor heat shield modification like you mentioned. Then for trailer wiring you'd want the Tekonsha kit part #118255 which…

The trailer wiring harness you would want for your 2015 VW Golf Sportwagen is the ZCI Wiring Kit part #119250KIT. This harness is nice because it does not require any cutting or splicing into the factory wiring of your vehicle. The only actual wiring…

The simple answer to your question is yes, your 2022 Audi Q7 with the mild hybrid 48 volt battery can still use the ZCI kit: - ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit #119250KIT I believe our…

Yes, I was able to obtain the following photos of the #EH39FR EcoHitch for the 2020 Tesla Model Y.

The "Inno" logo that is placed on the front and rear of the Inno Shaper 80 Roof Cargo Basket part #INXA568 are stickers that are applied at the factory before they ship to our warehouse. I do have a simple way for you to remove them but we…