Videos
for Ford Escape Owners
Help Articles
for Ford Escape Owners
Expert Answers
for Ford Escape Owners
To add wiring to your 2018 Ford Escape I highly recommend the Curt T-Connector #C56320. This plugs in behind your tail light housing and then draws power for your trailer lights directly from the battery via the 12V power cord. I have attached an…
view full answer...Yes, the Draw-Tite Trailer Hitch #75758 is a fit for a 2018 Ford Escape Titanium with the hands-free liftgate sensor. The sensor will still work though you will need to kick your foot on either side of the hitch receiver as opposed to the center. I…
view full answer...The difference between the letter D in your ST175/80D13 and the R in the tire size of the Wheel and Tire ST175/80R13 part #AM31985 that you referenced is the tire construction. D stands for bias-ply which is a less preferred tire construction,…
view full answer...Yes, the Curt T-Connector Vehicle Wiring Harness #C56320 will fit your 2018 Ford Escape SE.
view full answer...Hey Peter, so according to the instructions for the Curt Trailer Hitch Receiver #C38BR, Curt recommends you tighten all M12 hardware to 86 ft-lbs.
view full answer...The 3 trailer hitches with the most hidden receivers for your 2019 Ford Escape are the Curt #C13186, the Draw-Tite #75782, and the etrailer.com #e98866. Since they all have the same profile it really boils down to what style suits you best. If you…
view full answer...The bearing part #L44649 has an inner diameter of 1.063 and is typically used in 3,500 lb axle hubs and the #L44643 has an inner diameter of 1 inch and is typically used on 2,000 lb axle hubs. If you can get me more info on your trailer like axle…
view full answer...Hey Tanya, for a 2015 Ford Escape the hitch I recommend is the Curt #C13186 which has the best towing capacities, best price, and is mostly hidden. It's also a 2 inch hitch which means it has more accessories made for it than the smaller hitch…
view full answer...The reverse light pin on a traditional 7-way trailer connector, like part #PK11893 or a factory connector if that's what you have on your 2018 Ram, is the center pin. Take a look at the picture I attached that shows all the pin functions. To add…
view full answer...You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…
view full answer...Hey Aaron, for trailer wiring the colors are only a guide and not always carefully followed. In your case if the reverse light pin of your 7-way happens to have a black wire then that's perfectly fine to use for the reverse lights. So what…
view full answer...If your 2018 Ford Escape has a towing package you'll have a 4-pole or 7-pole connector already installed or a port to plug in a 7-way socket like part #A10-7072VP. If you don't see any wire harnesses already installed then you'll need to…
view full answer...

























