Videos
for GMC Acadia Owners
Help Articles
for GMC Acadia Owners
Expert Answers
for GMC Acadia Owners
It sounds like you are definitely on the right track. On a 2014 GMC Acadia The plug for the wiring harness #C56245 should be behind a trim panel behind the passenger side wheel. Sometimes locating these plugs can be tricky, and vehicle manufacturers…
view full answer...For a trailer hitch confirmed as a fit for your 1991 Chevy C1500 the Curt hitch part #C14081 is a confirmed fit. It would have more than enough capacity for your trailer as well. The gross vehicle weight rating (GVWR), or gross vehicle mass (GVM) is…
view full answer...The stop light switch wiring is located behind your brake pedal on your 2017 GMC Acadia. See the picture for a visual. If you are having trouble locating the wire you can use a Circuit Tester #PTW2993 to find out which wire sends a signal when the…
view full answer...Our etrailer Trailer Hitch Receiver #e98863 hides behind the plastic cover and is a fairly easy install! I'll include a video to show you how you can install it yourself. The wiring will be just as easy if not easier! Since you do not have the…
view full answer...Any GMC Acadia 2020 or newer would need to be towed on a dolly like the Demco Kar Kaddy #DM9713045. The 2019 and earlier models are able to be flat towed. If you have a 2019 model (or earlier) that you need to set up to flat tow, I can definitely…
view full answer...If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…
view full answer...You definitely want all of the hardware installed for hitch #C13272 or any hitch because how it attaches is part of how it gets its rating. It sounds like the problem you are having is a factory weld nut that is packed with grime and corrosion.…
view full answer...I spoke with my contact at Curt and he informed me that this Curt Trailer Hitch without the drawbar, part #C45019, weighs approximately 50 pounds.
view full answer...Tow dollies like the Demco Kar Kaddy SS part #DM9713045 do not need to be registered like a vehicle or trailer.
view full answer...This will depend on the hitch used and the height of the trailer coupler. You want the trailer to be as level as possible. We have a page on calculating hitch height and coupler height to help you find what ball mount would work best. Most light duty…
view full answer...I took a look at the online owner's manual for your 2014 GMC Acadia. It states if the vehicle is either front-wheel drive or all-wheel drive, it can be flat towed with all 4 wheels on the ground. I just recommend verifying this information in…
view full answer...Thank you for your recent purchase from etrailer. The grease seal included with this hub kit has an inner diameter of 1.500-inches and an outer diameter of 1.987-inches. This seal should be fully seated into the rear bore of the hub so that it is…
view full answer...