Videos
for Land Rover LR2 Owners
Help Articles
for Land Rover LR2 Owners
Expert Answers
for Land Rover LR2 Owners
To replace your cupped serrated washer/conical toothed washer you need Conical Toothed Washer - 5/8" Item #RP01292010
view full answer...Yes, you can. You will need the Replacement Hardware Kit item #RHK. This kit will include all the necessary bolts with proper grades, spacers, nuts, and the fish wire tools you will need to complete the installation. You will want to go where it says…
view full answer...The outside diameter of the Conical Toothed Washer, part #RP01292010 is 1-1/2 inches. A 5/8 inch opening will accommodate a bolt up to 15.875 mm. With the tolerances of the washer, the 16mm may fit but i cannot guarantee it.
view full answer...Yes, the replacement conical tooth washers #C17314 do indeed have a 3/4 inch inner diameter for use on a Curt weight distribution head.
view full answer...The connector you need to use to install the Tow Ready wiring harness part #118624 on your 2012 Land Rover Evoque is under the vehicle on the passenger side. Locate the opening to the right of the vehicle muffler. You will reach up into the opening…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…
view full answer...Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
view full answer...According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...




















