In order to replace your Carrier Air V RV Air Conditioner I highly recommend using the Advent Air Replacement RV Air Conditioner for Carrier Setup part #ACCAR135 for 13,500 Btu's or part #ACCAR150 for 15,000 Btu's. This unit will be the only…
As you noted, the mounting bracket on the Trailer Valet Swivel Jack and Trailer Mover #STC-V211 requires 8 inches of space to mount. If the crossbeams on your trailer frame are roughly 5 inches apart, not including the width of the beams as shown in…
The brake light wire on the 2011 Chevrolet Traverse is located in the instrument panel behind the steering column. You need to test the wires with a circuit tester like part #PTW2992 to see which wire has power when the brake pedal is depressed. I…
I've attached the photos of the instructions that come with the Trailer Valet XL Mounting Bracket #TVXLMB. It's a 2 page document, but hopefully it gives you a good idea of how it mounts and works with a Trailer Valet #TVXL2 or #TVXL25.
The Carrier Air V RV Air Conditioner is no longer produced so a direct replacement of the same unit is not an option. However, we do have available the two Advent AC models that are designed as replacement units for the Carrier Air V. I recommend…
Yes, the connector to install the Curt T-Connector Vehicle Wiring Harness #C56245 will still be located on your 2017 Chevy Traverse even if you don't have the factory tow package. Basically if you had the factory tow package it would already have…
I spoke with our resident tire and wheel expert and he said that for wheel bolts you will just follow the same torque specs as you would for a lug nut of the same size. Take a look at the chart I have included with lug nut torque specs. Based on your…
Tom, to flat tow your 2011 Chevrolet Traverse you can use: -The Blue Ox Base Plate Kit #BX1683 for a base plate kit, -The etrailer XHD Non-Binding Tow Bar for Blue Ox and Curt Base Plates #e67ZR for a set of tow bars, -The Roadmaster InvisiBrake Flat…
The model number you list is for the Carrier Air V, it is no longer produced. We do not have the replacement part you request available. If you want to consider replacing the entire unit, I suggest the Advent Air RV Air Conditioner w/ Air…
For your 2012 Buick Enclave the Draw-Tite 2-inch Class III hitch #75528 is a confirmed fit. Install instructions and a complete install video are linked for you. The hitch comes with all needed hardware. You will also need a ball mount, hitch ball…
The connectors on the taillights of the LTZ models of the 2012 Chevy Malibu are different which prevents the #C56027 from fitting. The Hopkins #46255 is designed to fit your LTZ.
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
