Custom Fit 2008 Ford Van Accessories

Since your 2008 Ford E-350 has a factory 7-way all you would need to install a brake controller like the Redarc Tow Pro Liberty part #RED24FR is the install harness part #RED87FR. I also really like the Redarc controllers for the reason you mentioned…

For your 2008 Jayco Melbourne 29D motorhome, you'll want the Timbren Front Suspension Enhancement System #TFEF350UH for the front and #TFERSD for the rear. If you decide to go with the AirLift 5000 Ultimate Air Springs, then you're going to…

I checked the owners manual of your 2021 Subaru Crosstrek and it is flat towable as-is which you can confirm if you check out the owners manual as well. You'd need to start with the Blue Ox base plate kit part #BX3622 which is a confirmed fit for…

The SnapRing TireSavers Tire Covers White #ST7001WH is exactly what you are looking for. They are Made in the USA and offer the simplest installation with no tools or straps needed. See video below showing how they hug the tire to protect it. If you…

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

For your 1997 Ford E-450 Motorhome you could use SumoSprings Solo Custom Helper Springs Front Axle #SSF-106-47 as they are confirmed to fit. However, this setup has a 1,000lb weight capacity and is meant for light duty applications. For your…

Unfortunately the most comfortable ride can be subjective. My suggestion is that if at present time you have hard contact with factory axle bump stops on frame and a very rough or unstable ride in turns, I would definitely select the Timbren Front…

The CURT Front Mount Hitch, #31053, only included up to the E350 RV Cutaway models but not the E450. Instead, you can use the Draw-Tite Front Mount Trailer Hitch Receiver, #65001. According to Draw-Tite, this hitch will fit the 2000 E450 RV Cutaway…

I have a solution for you that I can provide, but we aren't going to have a custom fit hitch to fit a vehicle like what you referenced. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body…

The winch will have circuit breakers built into it to prevent over draw on the vehicle battery. If using a winch that does not have its own built-in circuit breakers then you could install your own in line between the winch and the battery. The…

The capacities listed are specified for the way you use the trailer hitch, part #C31083. If you are using the hitch for a trailer the capacity is 5,000-lbs due to the stress vertically as well as the stress of pulling a trailer. The 9000-lb straight…

Since you already have a 4-way connector on your 2018 Toyota Highlander you need to use one of our adapter kits to convert it to a 7-way. If the trailer doesn't have brakes you only need to power its lights and the battery so you can use part…