As the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K #23-468-469 are a standard size for a 3,500 pound axle, they should fit your 2002 Featherlite 3110 without issue. However, there were, and…
For a hitch to carry your bike rack on your 2004 Lexus GX 470 I recommend the etrailer Trailer Hitch Receiver #e45AR. This is a Class III hitch with a 2" receiver and a bolt-on installation. It has a maximum tongue weight of 500 lbs which should…
Hey Anna, we have just what you need to activate the trailer wiring on your 2007 Toyota 4Runner and will plug right into the two connectors you have pictured (thanks for that by the way). What you need is the Hopkins part #HM43374 which gives you…
You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…
We do offer the hardware needed to re-install the Curt Hitch, part #13445 you referenced. You just need to enter the part #RHK and then enter the hitch number #13445 in the field on the right hand side of the page. Then select Curt from the drop-down…
We do have a hose and regulator that you can use on your Champion 3500 Dual Fuel Generator model #100264. You can use the Camco Automatic Changeover 2-Stage Propane Regulator #CAM59005, which is a direct replacement for the regulator on your…
I have a solution for you, but the Rhino Rack Pioneer Platform #RR25TB is designed to mount directly to either a Rhino Rack fit kit or Rhino Rack HD bars so you'll need a Pioneer platform that mounts to crossbars. There are 2 different sizes of…
The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.
I checked directly with Thule, and that strap is not a fit for the Rapid Crossroad Feet 450R, though what you can do is just replace one of the feet if you don't need all four, and re-use your handle as it comes separate. Or, if you also need the…
According to my contact at Progressive Dynamics, when installing the #PD4655V replacement converter it's not necessary to replace the DC board, as your current one is still working. However, it wouldn't be the worst idea in the world to go…
Ideally you want bunk boards that are at least 50% of the length of your boat, and want the to run from the stern and as far forward as you like. Since your boat is 16' Long you will want at least 8' of bunk boards, but I recommend going with…
