Custom Fit 2005 Honda Element Accessories

That very well could be a connector for trailer lights that you have found on your 2006 Honda Element. However, none of the available wiring harnesses for your Element plug into that connector. They are all hardwire options that require splicing into…

You are on the right rack for parts needed to flat tow your 2005 Honda Element. The direct connect base plate kit part #1541-5 is a confirmed fit and would work great with the Falcon All Terrain part #RM-522. For lighting/safety cables, locks, and…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Curt Trailer Hitch Receivers like part #C11681 which is a fit for a 2013 Honda Accord are designed so that anyone can install it. It requires almost no prior mechanical knowledge nor do you really need any special tools in most cases. The…

We do have toilets that will work for you, but that specific toilet is no longer available. Instead, for a low-profile Dometic toilet that is a gravity flush with a foot pedal, you can choose from one of the following: - Dometic Part-Timer RV Toilet…

It really comes down to the thickness of the door on your 1967 Airstream. From my research it looks like the 66-68 Airstreams had a thicker door which was over 2-1/4" thick. If you have the thicker door the only option would be to use one of the…

None of the jacks we offer have tube dimensions that would be small enough to fit the bottom support plate on your trailer that is 1-7/8 inches in diameter. The best recommendation I could make would be to install a new bottom support plate like part…

I may have a solution for you, however we do not have a trailer jack available that features an outer tube diameter of 1-7/8 inches. The best recommendation I have is to simply install a new bottom support plate like the Bulldog Jack Support Plate…

I spoke with my contact at Roadmaster who said that it takes their install team about 5 hours to install the Roadmaster InvisiBrake #RM-8700. He said that if the dealer hasn't installed one before then it could take them longer though because…

The Curt #C11700 will fit a Honda Element from 2003 to 2011, so it will definitely fit your 2005. Though some of the holes in the frame will need to be enlarged a little, this is a bolt on application.

The correct 4-pole trailer wiring harness for your 2005 Honda Element is part #C59496. This complete kit includes the harness itself, quick-splice connectors, wiring and even a circuit tester to help you identify the correct wires to splice into. A…

They really are very similar and interchangeable but the #MR84VR is for replacing a Lippert 1621 pin box whereas the part #MR94VR is for replacing a Trailair setup that also was for the 1621SHD.