Custom Fit 2003 Ford Ranger Accessories

I went out o the warehouse to measure the Hollywood Racks Sport Rider SE2, #HR1450Z. From the end of the shank to the nearest part of the elongated pin hole it measures 1-3/8 inches. From the end to the center of the hole it is 2-3/4 inches. And from…

The Hollywood Racks part #HR1450Z is incredibly stable. While it may not look as sleek as some of the more expensive racks it actually performs better in terms of stability than nearly all of them. Actually the rack doesn't move at all so…

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit, part #75082, for the same reason that you mentioned. The bar of the hitch is hidden behind the bumper. This hitch receiver is a Class III receiver with a maximum…

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #13138 for your 2003 Ford Ranger FX4 will allow the 235/70-16 spare tire to fit. Other styles for this truck like the Draw-Tite Max-Frame #75082 will not allow for that spare tire…

The Draw-Tite Class III Max-Frame Trailer Hitch Receiver, #75082, will fit the following Ford Rangers: 1998 - 2010 Ford Ranger 1983 - 1997 Ford Ranger, All except GT models I have included a link to the installation details below. I have also…

For your 2005 Ford Ranger 4WD the Timbren Rear Suspension Enhancement System, part #TFRR0504A, has a 3,000-lb weight capacity and is for use on the rear suspension. The Timbren Front Suspension Enhancement System, part #TFXF1004A, has a 1,000-lb…

I spoke with my contact at Curt and he provided a picture to show what to look for when it comes to determining whether your 2000 Ford Ranger has the front crossmember. You will see his picture off to the right. If your Ranger DOES NOT have a…

You can potentially use new tires and wheels on your trailer as long as there is clearance all around the existing tires for the larger size. Going to a 13 inch like with #AM31985 you will need at least 1.8 inches clearance above the existing tires…

You do indeed have a 12 inch rim. When you measure the diameter of the wheel, you'll need to measure the diameter of he wheel where the tire bead meets the wheel. I've provided you a cutaway diagram of a wheel showing where the measurement…

It sounds like the trailer might be triggering the automatic braking feature on your 2018 Jeep Grand Cherokee. The vehicles brakes are automatically applied and released when going in reverse and the sensors detect a possible collision with an…

We do have a solution for you but the #75082 Draw-Tite hitch isn't a fit for your 2003 Ford F-150. It's for the Ranger and Mazda B Series. For your F-150 you actually need hitch #75065 which does allow full access to the spare tire. I…