The Edge Insight CTS2 Comprehensive Gauge Display part #EP84130 is around 5-1/2" wide x 3" tall x 1/2" thick and the Edge Insight CS2 Comprehensive Gauge Display part #EP84030 is around 4" wide x 2" tall x 1/2" thick. If…
The Edge Insight CTS2 Gauge Display #EP84130 has a video input on the back which is intended for use with a backup camera; the compatible backup camera for this display is the #EP98201 , which is sold separately. If your existing front camera has the…
I do have options for you but they do not make an airbag kit for your 2015 Ford Expedition. The only suspension enhancement option we have for you is the Coil SumoSprings Custom Helper Springs part #CSS-1168R which are only a fit for the 4x4 models.…
SumoSprings custom helper springs like #CSS-1168R are intended for installation inside rear coil spring. They help stiffen and support the coils. Travel trailers usually have a leaf spring suspension. This type of system can be fitted with several…
I have another option for you, but the Air Lift 1000 Air Helper Springs for Coil Springs - Rear #AL61792 you were looking at is designed for the 1997-2002 Ford Expedition and will not fit your vehicle. At this time the only rear suspension…
Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…
You have some squat there but I've seen worse! Basically, there are two reasons that a vehicle can squat in the back. One is caused by the tongue weight of the trailer and the other is when you are carrying a heavy load in the back of the…
The right winch for you will really depend on the weight capacity you're needing. For instance, the Bulldog Winch #BDW10042 you'd looked at has a 9500 lb capacity, but when a pulley block like #BDW20077 is used, you'll double the pulling…
Thank you for the details! The Quick Disconnect Propane Hose #37207-31155 has a POL fitting on one end that would normally connect directly to a bigger propane tank as well as the quick-disconnect fitting you said matched up just fine with your 2021…
Yes, the MB Sturgis Propane Adapter Hose #100476-48-MBS will work for you as the QD side will attach to your Coleman grill and the other side will connect to your disposable tank.
I am not entirely sure what process you took so I'll give you some other things to try, or maybe a different way to test the Prodigy P3 #90195. First, sever the blue wire a couple inches from the back of your controller. Then use a circuit tester…
