Installation Guide for the Curt Trailer Hitch Receiver on a 1990 Dodge Ram Pickup Video

I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.

Curt Class V hitch #C15300 is a confirmed fit on your 1987 Ford F-150. To help you determine if it will be compatible with your skid plate I went to our warehouse and took a measurement of the hitch to find out the distance from the mounting brackets…

Hi Mike; based on your frame measurement it sounds like you have the standard or step bumper model of the 1992 F-250. The Curt #14001 is confirmed to fit this version of the pickup. If you want to be sure you can measure between the mounting holes in…

I spoke with my Curt representative, who tells me that the front face of the receiver would sit 10-3/4 inches rearward of the rear-most mounting hole. If you find the rear most mounting hole in the underside of the frame member and measure 10-3/4…

I would be happy to help you. I have linked some diagrams with every dimension you will need. The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" item #C15300 is confirmed to fit a 1979 Ford Bronco.

When measuring the frame width on a vehicle, you will need to measure from the outside of one frame rail to the outside of the other frame rail. It sounds like you have the 37-1/4 inch frame on your 1983 Ford F-100. The Curt Class IV 2 Inch Hitch,…

I contacted our representative at Curt and he informed me that you will be able to keep your spare tire on your 1997 Ford F-250 extended cab long bed with rear full tank, with the Curt Trailer Hitch Receiver, part #14001. When installing part #14001,…

The Curt Trailer Hitch Receiver #14001 that fits 1994 Dodge Ram trucks with standard or step bumpers states the torque specs on the linked directions as 110 lbs. I have added a link to a video of this hitch being installed on a similar year Ram for…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…