T-Channel Mount Kit for Kuat Grip Ski and Snowboard Carrier: The Breakdown Video

The Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XT has bars which are 4" wide so in order to mount the Malone DownLoader Kayak Carrier with Tie-Downs #MPG114MD you will need the Truck Rack T-Slot Fit Kit for Malone Kayak Carriers…

With the T-Channel Mount Kit for Kuat Grip Ski and Snowboard Carrier #GRDMK you can use any of the Kuat Grip Ski and Snowboard carriers as this will allow the carrier to attach to the top channel of the Thule Xsporter. For Grip that can carry up to 6…

I contacted Malone and the Malone XtraLight Trailer (MPG525) is not compatible with Crossbars for Malone MicroSport Trailers - 78" Long part #MPG4001. The only trailer that can use the longer cross bars is the Malone Microsport trailers that…

According to Thule, at one time they did the OEM roof racks for BMW/Mini, but that's been several years ago so they can't provide any information on anything more recent than 8 or so years ago. The good news is that I can simply provide you…

Instead of using the M8 T-Bolt #853-5715 for the Side Rails for Retrax XR Series Hard Tonneau Covers #RTT-82383 you can use the Square Nut #853-7557 instead. This has the same dimensions as the T-Bolt head section but this has threads for an M6 bolt…

The add on Cantilever Extension for Thule TracRac SR, G2, and T-Rac Pro2 Ladder Racks part #TH24002XT or the Cantilever Extension for Thule TracRac TracONE Ladder Racks part #TH24001XT will work with the older TracRac. You just have to determine what…

Thule basically purchased TracRac and changed the part numbers but not the actual bars themselves. So if you have the older TA29200 the #TH29200XT is the exact same. Just the feet of this is not available as a replacement part.

I went ahead and contacted Rhino-Rack, and they said that the aero bar accessory bar and the HD accessory bars for the pioneer platform are essentially the same. However, Rhino-Rack did say that they always recommend the aero bar accessory bar over…

You will loose the adjustable pitch feature on the Kuat Grip #GRR4B when using the T-Channel Mount Kit #GRDMK because the adjustable pitch happens on the clamping feet only. With that being said, unless you're worried about the clearance between…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…