bing tracking image

Curt Ball Mounts - Fixed Ball Mount - C45025 Review

content loading

Customers compare C45025 to these similar products




Products Featured in this Video



Review of Curt Ball Mounts C45025


Today were going to take a look at the Curt Class 1 Drawbar, part number C45025. This item has a sturdy steel construction. Its corrosion resistant thanks to the black gloss powder coat finish. It fits a 1 -inch trailer hitch receiver. The drawbar is intended in the rise position only meaning that you cant turn it upside down in your hitch to use it as a drop. It can only be used as a rise.

Taking a look at some of the specs and dimensions for this item; it has a gross towing weight capacity of 2,000 pounds, a tongue weight capacity of 200 pounds. The ball hole diameter is of an inch. The length from the center of the hitch pin hole to the center of the ball hole here is 11 9/16 of an inch, and the rise from the top of the shank to the top of the ball platform is 5 inches. It works with a pin and clip that is not included, however, you can get that right here at etrailer.com, part number pc2, and the way that would fit you would get your 1 inch trailer hitch receiver, you would put the shank inside the receiver, match the holes up there, and then you would just put the pin through there, clip that off, and youre good to go. That should just about do it for our Curt Class 1 Drawbar with a 5 inch rise, part number C45025..


Info for this part was:

Employee Brandon M
Installed by:
Brandon M
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.