Ultimate Overview of the Convert-A-Ball Ball Mount for 2" Hitches Video

The Brophy 2 inch hitch ball #CB26C is made in the USA. It is rated for 7,500 pounds and has a shank length of 2-1/4 inches and shank diameter of 1-1/4 inches. Convert-A-Ball interchangeable ball set #901b has a 2 inch ball as part of the set. It is…

It sounds like you are used to using a Bulldog Collar-Lok Coupler, like part #BD028288, and that your new coupler is the Bulldog Collar-Lok Coupler w/ Pin, #BD028244, which is designed to be used as you have indicated. You have to grasp the coupler…

The license plate light of a trailer will need to tap into the running light circuit of your trailer wiring. The white wire of the light will be the ground and would need to get ran to the frame of the trailer and the black wire will be the power…

You will need to use a quick splice, item #SWC502905-1, and splice the black wire from the LED Trailer License-Plate Light, item #LPL55CB, into the taillight wire on your trailer. The taillight wire is normally the brown wire, but you should use a…

I'm not sure I understand why you are holding a tree with a hitch pin, but the Pin and Clip For Class I and II Trailer Hitch Receiver Hitch #PC2 are rated to assist in towing up to 3500 lbs each. If you are using the cotter pin for the weight,…

Hitch pin and clips like the Curt #C21500 that you referenced don't actually have weight ratings. They are able to withstand the weight ratings of the hitch class they are designed to fit. Since this fits up to Class V trailer hitch receivers it…

Yes, as long as the actual tire size is the same, a radial ply tire like the Kenda ST185/80R13 #AM10208 will fit onto the wheel just the same as the bias alternative #AM1ST79 it's replacing. Radial trailer tires differ from bias models due to the…

The Kenda Karrier ST185/80R13 Radial Trailer Tire - Load Range D #AM10208 is made overseas, and there are none available in that size we offer made in the USA or Canada.

I will start by sating that the wheels/tires on the trailer you are looking at do look kind of undersized. So you definitely can stay with a 13" set up like the Kenda Karrier ST185/80R13 Radial Trailer Tire - Load Range D #AM10208 and Dexstar…

Your Thule Evolution 1600 6410 cargo box used the EasySnap Mounting Hardware Kit, which is now obsolete. Therefore, your best and closest option is to use the Replacement QM3 - Quick Mount Hardware #TH04997 to attach the box to your Malone AirFlow2…

It sounds like you are talking about cradle #TH8523387001. The screw is #TH05728. If these aren't the parts you are looking for let me know.

Hey Rob, thanks for reaching out! The Quick Grip Mount Assembly #TH05738 has a screw in the middle on the underside (see attached photo) that you can try removing to see if that lets you get inside to fix anything. I haven't done this on my end…