Checking Out the Mounting Hardware for Command Electronics Multipurpose LED Light Video

Hey Art, that is a slightly unusual taillight you have on your Sunseeker but I am sure the Command LED Trailer light part #328-003-85 that you referenced would work great to replace it. Worst case scenario you'd have to drill new holes for the…

Hey Steve, The ThinLine LED Tail Light for Trailers over 80" Wide #STL76RB has 1/8" diameter mounting holes so a #4 self tapping screw would thin enough to fit through them and mount the light to your trailer. Are you mounting into metal or…

The Mounting Hardware for Command Electronics Multipurpose LED Light #328-19-9 comes with two screws.

The Multipurpose LED Utility Light part #328-007-60WE can be mounted either vertically or horizontally as orientation does not matter. In order to mount the light you will need screws part #328-19-9 and butt connectors part #DW05744-5.

The light output of the Command Porch Light part #328-007-60WE is 560 Lumens. It also only draws .21 of an amp! I attached a review video link for this for you to check out as well.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…