All You Need to Know About the LED Porch and Utility Light for RVs Video

Hey Art, that is a slightly unusual taillight you have on your Sunseeker but I am sure the Command LED Trailer light part #328-003-85 that you referenced would work great to replace it. Worst case scenario you'd have to drill new holes for the…

I checked with Rhino-Rack and the rivet H004 in track set #RRRTV188 is listed as a 1.6mm - 6.3mm. That was all the information I was able to obtain.

I have a solution for you but you can not connect an inverter directly to the AC input of the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger 35 Amp item #PD4135K. You will need to use the Progressive…

I have a few different e-bike racks for you to check out and the differences really just boil down to the weight of the rack and the features it comes with. The first recommendation I have is the Hollywood Racks Destination E Bike Rack #HLY66ZR which…

The Mounting Hardware for Command Electronics Multipurpose LED Light #328-19-9 comes with two screws.

I contacted the manufacturer with what has been going on when using your Demco SBS Stay-IN-Play DUO Supplemental Braking System #SM99251. They were able to provide some insight. First, you need to be using a 20 amp fuse. They said that the…

For the LED Porch and Utility Light for RVs item #RVPLL11AB there are tabs on the sides that you can manually press in or pry on gently to release the lens from the base. A small flat blade screwdriver would work well for this. Once you get one side…

I have a great solution for you Jay but the Hollywood Racks Destination isn't rated for use at the rear of a flat towed vehicle. Instead the only option similar that would work is the Yakima OnRamp part #Y36FR which is rated for this application,…

Although it isn't paired together in a kit, you can use the T-Fitting #103537-MBS with the Quick-Disconnect Propane Hose #100476-72-MBS for your application. This provides you with the quick-disconnect equivalent of the MB Sturgis Sturgi-Flow…

If your 2020 Chevy Equinox is equipped with the factory tow package, the correct Curt harness is the T-Connector #C94FR. If you don't have the tow package (there isn't a factory connector already present at the bumper) you will instead want…

The wiring harness you need will depend on whether or not you have the Premiers sub-model or not. For the Premier, you'd use #118759 or #118750 if it's not the Premier model. There's also a third less expensive possibility....if your…

Since you have a 2021 Chevy Equinox Premier the correct trailer wiring harness is the part #118759 since the vehicle has different taillights than the non-Premier version which requires the part #118750.