Separate wiring system - brake and turn signals are sent along separate wires. A converter is required unless the vehicle is equipped with a tow package plug. The tow package plug has already been converted.
Custom Fit Vehicle Wiring Specs:
Plug-In Location:
Features:
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals.
Installation Notes:
For vehicles with factory tow package; may require additional components or may be used as a replacement harness
This wiring is intended to be used with the 319-R7-07 trailer side plug, which is sold separately.
If your trailer has conventional 7-way wiring, this wiring harness is made compatible with an EZConnect Adapter, which is sold separately.
More Information >Custom Fit Vehicle Wiring Specs:
Plug-In Location:
Features:
Upgrade the 7-way connection on your vehicle and trailer with this complete kit. Built-in magnets create tight connection. O-rings make a watertight seal. Face-to-face contacts mean no bent or broken terminals. Includes plug holder and dummy plug.
Installation Notes:
For vehicles with factory tow package; may require additional components or may be used as a replacement harness
More Information >Custom Fit Vehicle Wiring Specs:
Plug-In Location:
Features:
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals. O-ring on lid makes a watertight seal.
Installation Notes:
For vehicles with factory tow package; may require additional components or may be used as a replacement harness
This wiring is intended to be used with the 319-S7-07 trailer side plug, which is sold separately.
If your trailer has conventional 7-way wiring, this wiring harness is made compatible with an EZConnect Adapter, which is sold separately.
More Information >Videos
for Custom Fit Vehicle Wiring
Help Articles
for Custom Fit Vehicle Wiring
Expert Answers
for Custom Fit Vehicle Wiring
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...The OEM prep package consists of 4…
view full answer...If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your…
view full answer...Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a…
view full answer...To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a…
view full answer...I'm not sure why they include that replacement latch but that is not required for any of the…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length…
view full answer...As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…
view full answer...Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it…
view full answer...We can definitely get you set up. For a 7-way wiring harness for your 2024 Honda Pilot trailsport I recommend the Curt T-Connector #C35ZV which will plug in to the existing tow package connector at the rear your vehicle. I do also recommend getting…
view full answer...