Expert Review Video:
Vehicle Suspension Specs:
Features:
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
As someone who hauls gear and takes on tough trails, you know how much a good set of coil springs can change the game. Upgrading gives you improved handling, load support, ground clearance, and the confidence to take on whatever lies ahead.
Tech Tip:
Lower Shock Mount Stone Guard (sold separately) is recommended to protect rear shocks from gravel.
More Information >Vehicle Suspension Specs:
Features:
Get the cushioning power of SumoSprings for your coil springs and keep your ride comfortable. The wedge-shaped springs fit between the individual coils of your existing springs and help support heavy loads on your rear suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
For safety and stability, air springs are the perfect partner for your rear suspension when you are hauling heavy loads. Springs fit inside existing coil springs to help level your vehicle, improve braking and handling, and reduce tire wear.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
For safety and stability, air springs are the perfect partner for your rear suspension when you are hauling heavy loads. Springs fit inside existing coil springs to help level your vehicle, improve braking and handling, and reduce tire wear.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Haul and tow with confidence! Air Lift LoadLifter 5000 air springs level your ride for better braking, handling, and comfort while reducing strain on your suspension. With a 5,000-lb capacity, they keep your vehicle stable and ready for heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit vehicles with factory Air Suspension system
Tech Tip:
Fits all trims except TRD Pro and Trail Hunter.
More Information >Vehicle Suspension Specs:
Features:
Replace your rear factory bumpstops and enjoy greater control over your vehicle suspension when travelling off-road.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Replace your rear factory bumpstops and enjoy greater control over your vehicle suspension when travelling off-road.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Replace your rear factory bumpstops and enjoy greater control over your vehicle suspension when travelling off-road.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Get the cushioning of SumoSprings for your coils. These wedge-shaped springs fit between the individual coils in each spring of your vehicle's front suspension for better load support and a more comfortable ride. Great for trucks with snowplows.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Raise the front of your 2025+ Toyota 4Runner 3" and the rear 2", then tune its ride for pavement and rough trails. BP-51 bypass shocks let you adjust compression and rebound separately, with forged upper control arms included.
Installation Notes:
Product will add approximately 3 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Raise the front of your 2025+ Toyota 4Runner 3" and the rear 2", then tune its ride for pavement and rough trails. BP-51 bypass shocks let you adjust compression and rebound separately, with forged upper control arms included.
Installation Notes:
Product will add approximately 3 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Raise the front of your 2025+ Toyota 4Runner 3" and the rear 2" with this MT64 kit. Vehicle-tuned shocks handle roads and rough trails, while six spring-seat positions adjust front ride height. Forged upper control arms are included.
Installation Notes:
Product will add approximately 3 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Raise the front of your 2025+ Toyota 4Runner 3" and the rear 2" with this MT64 kit. Vehicle-tuned shocks handle roads and rough trails, while six spring-seat positions adjust front ride height. Forged upper control arms are included.
Installation Notes:
Product will add approximately 3 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Raise the front of your 2025+ Toyota 4Runner up to 3" without lifting the rear. MT64 monotube shocks handle pavement and rough trails with preset damping, while six front spring-seat positions and forged upper control arms round out the kit.
Installation Notes:
Product will add approximately 3 inches of lift to front of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Raise the front of your 2025+ Toyota 4Runner up to 3" without lifting the rear. MT64 monotube shocks handle pavement and rough trails with preset damping, while six front spring-seat positions and forged upper control arms round out the kit.
Installation Notes:
Product will add approximately 3 inches of lift to front of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
COMING SOON! Airlift is actively working on an upgrade for the rear coil suspension for your 2025 Toyota 4Runner. We'll update info as we get it. Preorder now for quickest delivery.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit vehicles with factory Air Suspension system
More Information >Vehicle Suspension Specs:
Features:
Raise the front of your 2025+ Toyota 4Runner 3" without lifting the rear, and tune its ride for pavement and rough trails. BP-51 bypass shocks give you independent compression and rebound adjustments, with forged upper control arms included.
Installation Notes:
Product will add approximately 3 inches of lift to front of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Raise the front of your 2025+ Toyota 4Runner 3" without lifting the rear, and tune its ride for pavement and rough trails. BP-51 bypass shocks give you independent compression and rebound adjustments, with forged upper control arms included.
Installation Notes:
Product will add approximately 3 inches of lift to front of your vehicle.
More Information >
Filters
