Video Transcript for RV Sewer Elbow Review

Speaker 1: Today we're taking a look at a Valterra RV Sewer Elbow. This elbow connects your RV's black water waste valve to your gray water waste valve which combines waste valve outlets into one outlet. The unit features a three inch rotating flange that bolts onto a black water waste valve. On this side right here, it features the inch and a half rotating flange that bolts onto gray water waste valve. Then this connector right here, this is a three inch spigot that slides into a sewer pipe. When installing, you will need to use some type of ABS solvent cement.

We do offer it here at etrailer.com. It is sold separately and required for installation.The unit itself is black in color and it's made from a sturdy ABS plastic construction. I just want to give you the mount hole measurements real quick on each flange. Now there're a square design, so I will give you the measurement center on center the distance between our mount holes. Going this direction, it looks like those are 3 and 3/4 of an inch.

That'd be the same between all of them. Then on the inch and a half rotating flange, center on center those measure about 2 and 7/16 of an inch apart on center. That's going to do it for today's look at the Valterra RV Sewer Elbow.