2003 Spare Tire Cover

CE Smith Spare Tire Cover #CE27440 is designed to be slipped over a mounted spare tire. It does not require you to unbolt the spare from the trailer or tire carrier. If you refer to the linked photo you'll see how the elastic hem snugs the cover…

Yes the hitch mounted spare carrier part #6715 can fit the hitch you have at the rear of your Minnie Winnie.

The 225/75-16 tires are about 29.29" in diameter. For that size I recommend Rampage Spare Tire Cover part #RA773201 which fits 30" to 32" diameter tires. It is a nice black UV-resistant material to avoid breaking down over time. The…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

The closest fit black spare tire cover that we offer for your ST205/75-14 size tire with a 26 inch diameter is the Bestop #B6102601. This spare tire cover has a diameter of 26-1/2 inches, which is only slightly larger than your trailer tire's…

When a tire is attached to the universal spare tire carrier, #6715, the tire will be at a slight angle; maybe 10 degrees off from a straight up and down 90 degrees. The top of the tire will be slightly closer to the vehicle than the bottom like in…

I have an option with less of an angle but there is not an option that is perfectly vertical besides the Roadmaster Spare Tire carrier part #RM-195125 like you mentioned. However, the Draw-Tite Spare tire carrier option part #6715 has less of an…

What you'll do is use a separate wheel chock behind the wheels after using the Thule RV Wheel Levelers #TH307617. All you need to use is the Buyers Products 10" Wheel Chock #337WC1086UWH.

The Front Mounted Trailer Hitch Universal Spare Tire Carrier #6715 you were looking at does not use standard lug nuts, and needs to use the included washers, and nuts. The bolts included with the hitch are 7/16-14 grade 5 bolts, so your M12-1.5 lug…

As long as there's a hitch at the back of your trailer the Spare Carrier part #6715 will work fine for you.

According to my Draw-Tite representative, the #6715 spare tire carrier should work with your 8-lug wheel as long as it doesn't weigh above 100 lbs.