2003 Truck Tailgate Lock

I sure do and yes they are! The holes are spaced 1-1/4" apart on center for both the BulletProof Hitches Weight Distribution Shank item #BPH85RR and the Blue Ox SwayPro Weight Distribution System item #BXW2000 so they are indeed compatible.

The Pop & Lock Custom Tailgate Handle with Lock #PAL5400 that you referenced is confirmed as a fit for all models of the 2005 Toyota Tacoma so it would work well for you. This one will key to your truck door key so that the same key will open the…

For your 2009 Silverado, the Pop & Lock Custom Tailgate Lock #PAL8120Q is confirmed to fit. I've attached the installation instructions for each as well as a video review.

I have linked the installation instructions for the Pop & Lock Custom Tailgate Lock with Plug & Play T-Harness #PL34FR below. You will want to see page 7 to locate where the plug and play harness ties into the factory wiring behind the…

For your 2001 GMC Sierra Pop and Lock does have a powered tailgate lock option but it's not the part number you mentioned as it's part #PAL8110. I attached an install video for this kit on a similar 2005 Sierra as yours as well.

Yes, the Pop & Lock Custom Tailgate Lock #PAL3300 will fit your 2002 Dodge Ram with the Quad Cab If you'd like to opt for a powered option we have the Pop & Lock Custom Tailgate Lock #PAL8320 which connects to the same functions as your…

Hey Mike, thanks for reaching out! For your application you'll want to go with the Quad-Fold BAKFlip G2 Hard Tonneau Cover #BAK26305 on your 2008 Ford Ranger. The etrailer Hard Tonneau Cover #e23DR actually doesn't fit your Ranger and we…

The wiring harness you will need to access to install the Pop & Lock Custom Tailgate Lock part #PAL8200 on your 2009 Ford Ranger will be under the passenger's side kick panel. Once the kick panel is removed you will need to test each of the…

The Tonneau Cover Adapter Kit #Y01155 is only a fit for the integrated tracks on Retrax XR Series, Embark LS and Pace-Edwards UltraGroove (except for 2004+ F-150) tonneau covers. While your Roll n Lock tonneau cover does have t-slots for some…

The Redarc BCDC Charger part #RED36TR can work with your fridge but it wasn't designed to power accessories directly. You could use it to charge your 12 volt battery that is then powering your 3-way fridge on DC mode though.

When installing the Pop & Lock Custom Tailgate Lock, #PAL3300, on your 1995 Dodge Ram Pickup you will need to remove the lower of the three bolts and loosen the other two. I have attached installation instructions for you.

It is possible to combine a tailgate lock and a lock for a Leer camper shell. The best way to do this is to use the Pop & Lock Custom Tailgate Lock #PL34FR, which will work with the factory keyless entry system on your 2017 Toyota Tacoma. You can…