Wheel Liners

Hey Gary, I'm a little confused as to what you're asking. Are you looking for front or rear hub cover? All of the 19.5" caps we have will be the 10 lug like I think you're wanting. Now that being said, technically these covers are…

There is no difference between the front and rear covers that come with the #WM3165B0. Each one is the same as the #NA7165B1 which fits the front or the rear.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Tow Ready Replacement Multi-Tow 7-Way & 4 Pole Trailer Connector #20119 that you referenced is a replacement for the factory installed tow package socket. This item uses a round U.S. Car Connector to plug in to the vehicle harness behind the…

Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…

Yes, the Demco Tabless Base Plate Kit item #DM9519319 will work with the etrailer XHD Non-Binding Tow Bar item #e94ZR. The Demco base plate kit is confirmed to fit your 2022 Chevrolet Colorado LT. It mounts where your tow hooks are currently and…

Hi Thien, From what I saw a 2017 Ford E450 chassis does use the same 16x6 wheel with an 8 on 6-1/2" bolt pattern, so the correct fit is the Steel Dual Wheel with Offset - 16" x 6" Rim - 8 on 6.5 - 4.75" Pilot - Silver #AM83NR.…

The only difference between the Dexter Electric Trailer Brake Assembly part #23-181 for right hand or part #23-180 for left hand and the Dexter Nev-R-Adjust Electric Trailer Brake Assembly part #23-465 for right hand or part #23-464 for left hand is…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Scott, TireMinder unfortunately doesn't offer the extender hoses separately so you would need to order the entire kit with the brackets included #TM59SR.

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

The Wheel Masters Tire Pressure Valve Extenders - 180-Degree Bend - Aluminum Rear Wheels - Qty 2 #WM8029180 are a great option but for a little more accessibility it sounds like you'd prefer something more like the Wheel Masters 2-Hose Inflation…