1985 Chevrolet S-10 Pickup Vehicle Snow Plows

Hey Bob, thanks for reaching out! We know the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH87SR will fit your 2023 Ford F150 Lightning because we've had another customer send in a photo with it installed on their Lightning (see attached…

Good question! The blade stiffeners that come with the Detail K2 Snowplow #K2AVAL8422 don't necessarily have to be used. I reached out to my contact at Detail K2 who said that the only time that those stiffeners really need to be used is if you…

For your 2006 Honda Ridgeline, the K2 Avalanche plow is only a fit for the front mounted receiver. The custom mount brackets #K286110 are not a direct fit for your Avalanche plow but the mount does come with a crossbar and I've attached the photo…

To install the Detail K2 Storm II Snowplow - 84" #K2STOR8422 on your 2002 Ford F-150 you have to use the mount kit part #K281511 which is a confirmed custom fit for your truck and designed to be used with this plow.

Hi Winston; there are two options to mount a snow plow on your 2010 Ford F-150 FX4. If you want to use the Detail K2 Summit II Snowplow #K2SUMM8826 you looked at you will need the Custom Mounting Brackets for Detail K2 Snowplows #K281521. The…

Hey Kurt, yes the correct gap for SumoSprings Solo kits like the part #SS88UV is 1/2 inch to 1 inch like you mentioned. Did you install this already?

In order to use the Detail K2 Storm II Elite Snowplow part #K2STOR8422ELT on a 2002 Ford F-150 2WD you'll need the Custom Mounting Brackets for Detail K2 Snowplows part #K281511.

We have front suspension enhancement that fits your 2000 Ford F-150, but we do not have anything from SumoSprings. The only option we have is the Timbren kit part #TFF150972 which will fit and work well.

Hello again Mike, Happy to get you into the right Air Lift set-up for your 2017 Toyota Tacoma. You will need the Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle #AL49DQ for the airbag kit. Not all lift kits provide the same amount of lift, so…

It is likely you can avoid the drain line when installing the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR by using the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications #MR43WR. I don't know exactly the…

If you have a front hitch installed ono your 2018 Chevy Silverado 3500 then you would not need anything else to use the Detail K-Summit Plow part #K2SUMM8826ELT that you referenced. If you do not have a front hitch we have the Curt part #C31071 that…

Hey Bruce! The support bar mounting issue you pointed out is why I am going to steer you away from using the Curt Front Hitch item #31302 to attach a snow plow on your 2006 Yukon. Those support bars on the SnowBear Snowplow item #K2AVAL8219…