1997 Isuzu Hombre Truck Bed Sliding Tray

The reverse light pin on a traditional 7-way trailer connector, like part #PK11893 or a factory connector if that's what you have on your 2018 Ram, is the center pin. Take a look at the picture I attached that shows all the pin functions. To add…

Hello John, There isn’t a specific weight rating listed for the Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" #LC1315411. However, most Lippert spare tire winches are rated to handle 100 lbs or more, which is more…

Chevy stopped using a port to plug in a brake controller after the 2006 model year. The tow package wires to install a brake controller are still present up under the dash, to the left of the steering column, held together with a white tag. The wires…

The Truck Trolley Truck Bed Slide Out Tray for 8's Long Truck Beds item #TR99VR includes the Long Bed Extension Kit item #TR59VR. The Truck Trolley Truck Bed Slide Out Tray item #TR87VR is just the tray.

Hey Jerry, yes using the Air Lift kit part #AL83DQ would affect how the smart hitch and scale would function as that scale uses the suspension movement to determine how much weight is added into the bed of the truck. If the air bag kit minimizes…

Hey Mike, thanks for reaching out. The 60" x 23" dimension listed for the #MR87ZV cargo tray is the overall dimensions of the tray. The inside dimensions of the tray are 58-1/4" long x 19-7/8" wide.

Hi Adrian; the Invis-A-Rack #DZ951550 (6-1/2' bed) and #DZ951800 (8' bed) are not compatible with any available tonneau covers. There was a time where TruXedo made one for this rack but it has been discontinued for a while now. If you want to…

Not knowing the model I can't confirm exactly what functions these pins serve for sure but I can say that on other 6-pin connectors like the one with the #ACDOM135B pin 1 is the Compressor Hot and pin 4 is the Low Fan. I've attached a diagram…

Hey Christian, thanks for reaching out! I have a wiring diagram for the Advent Air RV Air Conditioner #ACM150 (see attached), but I unfortunately don't have a photo of the back of the plug itself. You should still be able to follow the diagram…

Advent Air Conditioners like part #ACM135 come with a connector that pairs up directly with the standard 6-wire connector. If you have a 9-wire connector then you need the kit #ACRG15 as well. For wiring I'm attaching some photos of diagrams for…

The Advent Air RV AC unit part #ACDOM135 is actually very similar to the Dometic Duo Therm to the point many would say it's a little too close of a copy...that said it does work really well and would be a solid option to replace your Penguin…

Hey John, you can install an AC unit like the Advent Air #ADV95SR on the roof of an enclosed car hauler like you have but you will need to do a little reinforcing of the roof and come up with some framing around the opening for the unit to install.…