Replace a worn or missing cap on your Dexter Vortex 6-lug hub to keep grease in and road grime out. This threaded Vortex grease cap fits 2,500-lb Vortex idler 6-lug hubs and hub/rotors. ... Features: Replaces one grease cap on Dexter Vortex trailer hubs Helps keep grease in and contaminants out Threaded design makes removal and installation easier than drive-in caps Fits 2,500-lb Vortex idler 6-lug hubs and hub/rotors Specs: Quantity: 1 cap with O-rings Outer diameter: 2.44" Thread diameter: 2.82"
Cap assemblies replace the grease caps on your Dexter or Tie Down Vortex trailer hubs. Includes 2 threaded caps that fit 2,500-lb to 4,200-lb hubs.Features: Replaces the grease caps on your Tie Down (or Dexter) Vortex trailer hubs Fits 2,500-lb - 4,200-lb idler hubs and hub/rotors Quantity: 2 caps
Cap assembly replaces the grease cap on your Dexter or Tie Down Vortex trailer hubs. Includes 1 threaded cap that fits 2,500-lb to 4,200-lb hubs.Highlights Cap Assembly Replacement: Cap assembly replaces the grease cap on your Dexter or Tie Down Vortex trailer hubs. Hub Compatibility: Fits 2,500-lb to 4,200-lb hubs. Specs Application: Fits 2,500-lb - 4,200-lb idler hubs and hub/rotors Fits Vortex K71-G01-73 (81143) 21-261 Thread and Seal Details: 2 5/16-11 Threads with Viton O-ring Weight: .244 lbs.
Cap assembly replaces the grease cap on your Dexter or Tie Down Vortex trailer hubs. Includes 1 threaded cap that fits 2,500-lb to 4,200-lb hubs.Trailer Highlights Cap Assembly Replacement: Cap assembly replaces the grease cap on your Dexter or Tie Down Vortex trailer hubs. Hub Compatibility: Fits 2,500-lb to 4,200-lb hubs. Specs Application: Fits 2,500-lb - 4,200-lb idler hubs and hub/rotors Fits Vortex K71-G01-73 (81143) 21-261 Thread and Seal Details: 2 5/16-11 Threads with Viton O-ring Weight: .244 lbs.
Time and miles catch up with every trailer. When you get corrosion or damage at the hub you want a replacement that matches your spindle. This galvanized idler hub fits 3,500-lb #84 spindles used with threaded Vortex setups. ... This hub is built specifically for 3,500-lb axles with #84 spindles that originally used a threaded Vortex oil bath hub. Standard hubs will not fit that spindle correctly.
Time and miles catch up with every trailer. When you get corrosion or damage at the hub you want a replacement that matches your spindle. This galvanized idler hub fits 6,000-lb #42 spindles used with threaded Vortex setups. ... This hub is built specifically for 6,000-lb axles with #42 spindles that originally used a threaded Vortex oil bath hub. Standard hubs will not fit that spindle correctly.
Oil leaked, water got in, and the bearings are shot on your 7,000-lb #42 spindle. Not every hub will fit on that setup. This galvanized idler hub is built to replace threaded Dexter Vortex oil bath hubs, restoring function without changing the axle.Features to know about Threaded Replacement for Dexter VortexHubs A failed oil bath hub leaves you with a spindle that standard hubs will not fit. This idler hub uses a compatible pilot design built to replace Dexter Vortexhubs and fits 7,000-lb axles with #42 spindles.
Round trailer axle beam measures 89" from hub-face-to-hub-face and 74" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" to 15" wheels.Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Round trailer axle beam measures 60" from hub-face-to-hub-face and 48" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 8" to 14" wheels.Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Round trailer axle beam measures 95" from hub-face-to-hub-face and 80" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" to 15" wheels.Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Round trailer axle beam measures 72" from hub-face-to-hub-face and 58" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" to 15" wheels.Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Round trailer axle beam measures 60" from hub-face-to-hub-face and 48" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" to 15" wheels.Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Round trailer axle beam measures 89" from hub-face-to-hub-face and 74" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" to 15" wheels.Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Round trailer axle beam measures 72" from hub-face-to-hub-face and 58" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 8" to 12" wheels.Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Round trailer axle beam measures 60" from hub-face-to-hub-face and 48" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 8" to 12" wheels.Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Round trailer axle beam measures 72" from hub-face-to-hub-face and 58" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 8" to 14" wheels.Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Round trailer axle beam measures 95" from hub-face-to-hub-face and 80" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" to 15" wheels.Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Round trailer axle beam measures 60" from hub-face-to-hub-face and 48" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 8" to 12" wheels.Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Round trailer axle beam measures 60" from hub-face-to-hub-face and 48" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" to 15" wheels.Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Trailer axle measures 49-1/2" from hub face to hub face and 38-7/16" from Spring center to spring center. Includes fully pre-assembled studded hubs. Made for a 40" frame.Features: Square axle beam acts as part of your trailer' suspension system Replaces an axle on your trailer Straight spindles - no drop Studded hubs are sturdy and corrosion resistant Bearings, races, seals, grease caps, wheel studs, lug nuts, and quality calcium-sulfonate grease included Specs: Weight capacity: 1,800 lbs Hub-face-to-hub-face length: 49-1/2" Spring-center-to-spring-center length: 38-7/16" Overall beam length: 54" Hub bolt pattern: 5 on 4-1/2"
Trailer axle measures 57-1/2" from hub face to hub face and 46-1/2" from spring center to spring center. Includes idler hubs with bearings, races, and seals. Corrosion-resistant galvanized steel is great for a boat or snowmobile trailer.This 500-hour salt spray rating indicates that a product is not only durable enough to last in freshwater environments, but it can also be used on trailers that come into contact with saltwater Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
... Rubber plug keeps grease in and water out. Designed for Dexter 7" and 10" x 1-1/4" hubs. Includes 2 caps.Features: EZ Lube grease caps seal your hub and let you easily add grease through your EZ Lube axle spindle Rubber plug keeps grease in and helps block dirt, water, and debris Drive-in installation makes it easy to secure the cap into your hub bore Made in the USA Specs: Quantity: 2 Flange diameter (outer diameter): 1.99" Application: Fits Dexter 7" and 10" x 1-1/4" hubs with EZ Lube spindles
These 2.72" OD EZ Lube grease caps seal your Dexter hub and let you add grease through the spindle. Zinc-plated steel resists rust. Designed for 12" x 2" Dexter hubs with 8-bolt pattern. ... Features: Grease caps let you add grease through EZ Lube spindles while sealing out water and debris Includes removable rubber plugs for access to zerk fittings Corrosion-resistant zinc plating and 22-gauge steel hold up to harsh road conditions Drive-in installation makes it easy to seat each cap securely Made in the USA Specs: Quantity: 2 Flange diameter (outer diameter): 2.72" Overall height: 1.28" Application: Fits Dexter 12" x 2" hubs with 8-bolt pattern and EZ Lube spindles
Get more clearance and a smoother ride. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, standard-height spindle keeps your deck height the same. Fits any trailer frame width. Includes inner (L44649) and outer (L44649) bearings.Features: Delivers a smooth, stable, quiet ride - regardless of load size Jounce springs absorb road shock and support trailer's load Rebound springs minimize body roll, rattle, and bottoming out Built-in camber and toe-in reduce wear on your trailer's tires Units work independently - what affects one side of your trailer won't affect the other Eliminates axle beam to increase ground clearance and fit any trailer frame width System replaces 1 trailer axle and suspension components 2 Separate units bolt directly to your trailer's frame Designed for your on-road adventures Strong steel construction is built to last Black powder coat resists rust and corrosion Keeps trailer deck height the same while increasing ground clearance Standard-height spindle is built in Includes idler hubs with bearings, races, and seals Allows for simple bearing maintenance with built-in grease zerks Specs: Application: single- and tandem-axle trailers that use regular tires Tandem-axle trailers require 2 complete systems Not recommended for triple-axle trailers Quantity: 2 suspension units (with hubs) Weight capacity: 2,000 lbs Bolt pattern: 5 on 4-1/2" Bolt hole diameter: 1/2" Suspension travel: 2-7/16" 3-Year limited warranty Tire, Wheel, and Hub Compatibility Tire size: 195/75R14 or smaller Wheel diameter: 16" or smaller Bearings (included) Inner: L44649 Outer: L44649 Races (included) Inner: L44610 Outer: L44610 Seal: 10-9 (included) Inner diameter: 1.500" Outer diameter: 1.987" Note: This Axle-Less system requires crossbeam support.
Filters
