Replace broken and worn out trim molding with a durable and longer-lasting upgrade. This seal works like a bumper to protect against impacts and scuffs and keeps screw tracks safe from the elements with a clean, finished look. ... Features: Insert replaces trim molding found on RVs, boats, and utility vehicles Protects your ride from impacts, scuffs, and the elements Weatherproofs screw tracks to prevent deterioration Easy installation - snaps into 1/2" tracks and moldings Tucking tool recommended to ease installation (sold separately) Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 1/8" wide x 5/8" tall Made in the USA
Replace broken and worn out trim molding with a durable and longer-lasting upgrade. This seal works like a bumper to protect against impacts and scuffs and keeps screw tracks safe from the elements with a clean, finished look. ... Features: Insert replaces trim molding found on RVs, boats, and utility vehicles Protects your ride from impacts, scuffs, and the elements Weatherproofs screw tracks to prevent deterioration Easy installation - snaps into 3/4" tracks and moldings Tucking tool recommended to ease installation (sold separately) Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 25' long x 7/8" wide x 3/8" tall Made in the USA
Replace broken and worn out trim molding with a durable and longer-lasting upgrade. This seal works like a bumper to protect against impacts and scuffs and keeps screw tracks safe from the elements with a clean, finished look. ... Features: Insert replaces trim molding found on RVs, boats, and utility vehicles Protects your ride from impacts, scuffs, and the elements Weatherproofs screw tracks to prevent deterioration Easy installation - snaps into 1/2" tracks and moldings Tucking tool recommended to ease installation (sold separately) Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 1/8" wide x 5/8" tall Made in the USA
Replace broken and worn out trim molding with a durable and longer-lasting upgrade. This seal works like a bumper to protect against impacts and scuffs and keeps screw tracks safe from the elements with a clean, finished look. ... Features: Insert replaces trim molding found on RVs, boats, and utility vehicles Protects your ride from impacts, scuffs, and the elements Weatherproofs screw tracks to prevent deterioration Easy installation - snaps into 5/8" tracks and moldings Tucking tool recommended to ease installation (sold separately) Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 10' long x 3/8" wide x 7/8" tall Made in the USA
This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank.Features: Roof vent allows fresh air to enter, and heat to escape, while trailer or RV remains locked and secure Simple, hand-operated crank rotates to open and close dome and eliminates the need for wiring Translucent cover allows some light through Aerodynamic, wedge-shaped dome made of durable polypropylene Galvanized steel roof flange won't rust or corrode Snap-out screen is easy to clean Birch White interior trim piece (or garnish) is included Made in the USA Specs: Included garnish fits roofs 1-7/8" to 3" thick Garnish leg length (depth): 2-1/8" Garnish color: Birch White Other garnish sizes are available (sold separately) Cover color: white Rough opening size: 14-1/4" wide x 14-1/4" long Vent extends above roof: 4-1/2" Closed 10-3/4" Open 2-Year warranty Note: Screws and sealer are not included.
This roof vent uses a 120V fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes with a hand-operated crank.Features: Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure Simple to upgrade from non-powered model Basic, hand-operated crank rotates to open and close dome Switch to turn the fan on/off is mounted on the vent Translucent cover allows some light through Aerodynamic, wedge-shaped dome made of durable polypropylene Galvanized steel roof flange won't rust or corrode Built-in screen keeps debris and insects out of trailer Polar White interior trim piece (or garnish) is included Made in the USA Specs: Included garnish fits roofs 2-1/8" to 3-1/4" thick Garnish leg length (depth): 2-1/8" Garnish color: Polar White Other garnish sizes are available (sold separately) Fan power: 120-volt AC 100CFM Motor power draw: 0.77 amps Cover color: white Rough opening size: 14-1/4" wide x 14-1/4" long Vent extends above roof: 4-1/2" Closed 10" Open 2-Year warranty Notes: Screws and sealer are not included.
Hey Laura! Yes, the Van Windows Direct #VW83FR and #VW45FR come with the parts needed for installation. However, each one does list some additional materials and tools to complete the installation. I went ahead and attached pictures of these below. I…
Hey Gregory! The silver clips that came with your #VW64FR are screen attachment clips. These are included as extra parts if they are ever needed in the future, as the screen comes pre-mounted from the factory. To install the clamp ring, position it…
Hey Jonah, thanks for reaching out. Yes, we do have brakes and drums for 10K axles. The brakes are a standard size, so for those I recommend the following: - etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" -…
Hey David, When I've installed these before on Subaru's I use the no drill mounting bracket #C57202 and the 7-way mounting bracket #TS64RR attached to the driver side of the hitch crosstube. You'll have to bend the bracket to get the…
Hi Rick, I'm so sorry that happened with your ATV, it sounds really scary! To secure it to your tilt trailer and keep that from happening again, the etrailer E Track Wheel Tie Down Straps w/Roller Idlers part #e64PR you were looking at will do…
Hi Dave; that somewhat depends on the actual tire size but I would say a 4' section #e85VR is the minimum with a 5' #e25VR giving you a little more versatility with the #e64PR mounting position if you have the room for it. Both of these can…
Hey Kerri. The Replacement Fabric item #e96QV is going to be white when it's rolled up. This black fade fabric is designed to replace the ones on 15' wide awnings like our etrailer item #e24QV. What kind of awning do you have and what color…
Hey Jeff, we can definitely help but the pins that go into the breakaway switch are not all universal and unless you know what brand it is the best solution is to just replace the entire switch like with the part #420000 as this approach is universal…
Hey Jon, yes you sure can! And it's not too difficult either. If your vehicle already has a 4 way flat on the back, you can just install the #ETBC7 which converts it to a 7 way to be used with trailers that have electric brakes. Basically the 4…
We do have a grease seal that is almost exactly what you measured that should work for you, with the outer diameter being 0.06 inches off, which could very easily be explained by the amount of pressure put on the caliper. So it is very likely that…
Hey Gary, thanks for reaching out and providing your photo! It looks like you have a 32 Series step so to replace just the body/frame you'll need the Replacement Step Frame for Kwikee RV Electric Steps - 32 Series #LC3722618. This has 2 steps and…
I spoke with my contact at Lippert just to verify the contents of the Lippert Components Kwikee 32 Series Double Tread Step #LC372261 that you referenced. He did confirm that this particular 2 step assembly includes everything needed (control unit,…
Waterproof, 2-LED marker light with chrome trim can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. ... Features: 2-Sided clearance light installs on your trailer fender Amber light faces front of trailer Red light faces rear of trailer Reversible assembly can be installed on either driver's-side or passenger's-side fender Sonically sealed, waterproof unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear polycarbonate lenses with red and amber LEDs Chrome-plated ABS plastic trim snaps on for a finished look Mounts on surface of trailer - hardware not included 2-Wire pigtail with power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 1-5/8" long x 13/16" tall x 1-1/4" wide Distance between mounting holes (center to center): 1-1/4" Diodes: 2 Power draw at 12.8 volts: 0.04 amps Quantity: 1 fender clearance/marker light Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
JR Products vinyl insert replaces 25' of worn and damaged vinyl trim molding to seal and protect your RV from water damage.Features: Vinyl insert replaces worn and damaged vinyl trim molding Length: 25' Width: 1" Black Lifetime warranty
This 93-1/2" long section of rounded J-channel trim covers unfinished or sharp edges around your enclosed trailer's stone guard. Aluminum construction is sturdy and rustproof. Trim can be cut to fit your specific application.Features: Rounded J-channel trim covers the cut edges on your enclosed trailer Can be used on your trailer's stone guard or as trim on exterior siding Aluminum construction is sturdy and rustproof Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 7/8" tall x 1/4" deep Made in the USA
Lower trailer edges take on road spray, debris, and water that can wear down panels or seep behind seams. This uneven aluminum rub rail trim covers exposed edges to protect them and help keep water from getting behind the panel.If you're replacing a section, measure your current trim or mounting area and compare: Overall length (this trim is 93-1/2") Overall height (this trim is 5/16") Overall width (this trim is 1-1/2") Profile shape — how the trim is formed and how it sits along the trailer edge The shape matters just as much as the dimensions.
... Trim can be cut to fit your application.Features: Angle trim covers any exposed plywood edges on your enclosed trailer Can also be used inside your trailer or on your trailer's ramp door Aluminum construction is sturdy and rustproof Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 3/4" tall x 1-1/2" deep Made in the USA
Finish the lower edges on your trailer or stone guard with this aluminum rub rail trim. It covers exposed edges to reduce wear and helps keep water from getting behind the panel.To get the right fit, you'll need to match it to your existing trim by measurement. If you're replacing a section, measure your current trim or mounting area and compare: Overall length (this trim is 93-1/2") Overall width (this trim is 1-1/2") Height or thickness (this trim is 1/8") Profile shape — how the trim is formed and how it sits along the trailer edge The shape matters just as much as the dimensions.
... Trim can be cut to fit your application.Features: Angle trim covers any exposed plywood edges on your enclosed trailer Can be used on the edge of your wooden ramp door Aluminum construction is sturdy and rustproof Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 3/4" tall x 3/4" deep x 0.05" thick Made in the USA
Install this rear trim piece to cover and protect the top right corner seam of your RV. Designed to cover this crucial zone and wrap down the side for a finished look, this quality part is easy to install and won't fade or crack from UV exposure.Features: Use this right-hand top rear corner trim piece to protect the seam on your RV's exterior Shaped, molded plastic cap covers seam that is susceptible to damage Considered to be a direct replacement for your standard RV part Features 2 mounting holes that line up with the existing screw locations Plastic material is impact and salt resistant, and won't fade or yellow from UV rays Mounting hardware not included Made in the USA Specs: 2-Hole screw pattern 1- Year warranty
When your RV trim pulls back and exposes screws, this 1" vinyl insert covers the track to keep water out of the seam while replacing cracked or stained trim for a cleaner, finished look.Highlights Covers Screws and Protects Seams: 1" vinyl insert fits roof edge and corner moldings to shield fasteners from exposure. Restores Worn Trim Appearance: Black vinyl replaces cracked or stained insert trim for a finished exterior look. Fits Shorter Repair Runs: 25' length works for targeted trim replacement without excess material.
When your RV trim pulls back and exposes screws, this 1" vinyl insert covers the track to keep water out of the seam while replacing cracked or stained trim for a cleaner, finished look.Presses Into Existing Tracks: Flexible vinyl installs into trim channels to stay positioned along the run. Specs Dimensions: Trim width: 1" Length: 100' Construction and Color: Material: Vinyl Color: White
Use this small edge rubber trim around your enclosed trailer's stone guard or to cover sharp aluminum edges. Can be used inside or outside of the trailer.Features: This small edge rubber trim covers sharp aluminum edges on your enclosed trailer or around your trailer's stone guard Can be used inside or outside of the trailer Rubber construction is durable and flexible Dimensions: 25' long x 3/4" x 1/2" Made in the USA
When your RV trim pulls back and exposes screws, this 1" vinyl insert covers the track to keep water out of the seam while replacing cracked or stained trim for a cleaner, finished look.Highlights Covers Screws and Protects Seams: 1" vinyl insert fits trim channels to shield fasteners from exposure. Restores Worn Trim Appearance: Black vinyl replaces cracked or stained insert trim for a finished look.
... Trim can be cut to fit your specific application.Features: Flat rub rail trim covers unfinished edges along the bottom of your enclosed trailer Can also be used on your trailer's stone guard Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Aluminum construction is sturdy and rustproof Trim can be cut to fit your specific application Dimensions: 93-1/2" long x 3" tall x 1/2" deep Made in the USA
5-3/4" x 3-1/8" Rectangle. Multipurpose LED light illuminates the interior or exterior of your RV, camper, or trailer with bright light. Screw-on lens. Surface mount. 2-Wire design.Features: LED utility light illuminates the interior or exterior of your RV, camper, or trailer with bright white light LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Durable black plastic base with white trim Clear, acrylic screw-on lens Screws included for lens attachment Compatible with 12V DC systems Surface mount to trailer - mounting hardware not included Included foam gasket helps create a weathertight seal 2-Wire pigtail includes power lead and ground wire Assembled in the USA Specs: Dimensions: 5-3/4" long x 3-1/8" tall x 1-1/2" deep Diodes: 9 Wire length: 4" 1-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
When your RV trim pulls back and exposes screws in narrower channels, this 3/4" vinyl insert covers the track to keep water out of the seam while replacing cracked or stained trim for a cleaner, finished look.Highlights Covers Screws and Protects Seams: 3/4" vinyl insert fits trim channels to shield fasteners from exposure. Restores Worn Trim Appearance: White vinyl replaces cracked or stained insert trim for a finished look.
Replaces the snap trim cover for your Lippert Components Radius screen door. Measures 76" long, made of durable plastic, and is easy to install. Black color.Features: Replaces the snap trim used to cover the screws on your Radius screen door Adds a sleek aesthetic to your RV screen door while protecting the installation screws from the elements Durable plastic construction is easy to install Black color matches your existing screen door 76" Long Made in the USA
This 93-1/2" long section of top rail trim covers any unfinished edges on the top or bottom of your enclosed trailer. Aluminum construction is sturdy and rustproof. Trim can be cut to fit your application.Features: Top rail trim covers any unfinished edges on the top or bottom of your enclosed trailer Aluminum construction is sturdy and rustproof Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 2-3/4" tall x 1-1/2" deep Made in the USA
This reversible 2-LED fender light keeps replacement simple since the same symmetrical assembly works on either side of your trailer. The sonically sealed housing is submersible, while the amber/red lens puts both colors in one compact light.
Filters
