Result: trailer mud flaps

Both tires #AM30670 and #AM30790 are Kenda tires but there are a number of differences. For starters they're different sized tires. The #AM30670 is a 4.80-12 sized tire and #AM30790 is a larger 5.30-12 sized tire. The latter being about 3/4 of an…

I cannot recommend going above the 65 mph limit of the load range B Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4" Bolt Pattern #AM30550 or 5 on 4-1/2" Bolt Pattern #AM30590. Having said that, going to a…

Sure can; I verified directly with Dexter that the correct bearing kit for the hubs on your 5,200 lb Dexter axle is the following: - Bearing Kit #BK3-300

For a Dexter hub/drum that fits a 5,200 lb axle and includes bearings, seals, and lug nuts we have the Dexter part #8-201-9UC3-EZ which includes the same bearings Dexter uses that are made in China.

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

The two tire sizes you referenced, 4.80-12 and 5.30-12, both fit 4-inch wide rims, but they differ in their overall diameter. A 4.80-12 tire/wheel when fully inflated will have a diameter of 20-1/2-inches while the 5.30-12 size will be just under…

I would be happy to help you find the right connector. It is behind the dash at the very top of your console on your 2019 Ford E-350. You will need to pop that panel out and the connector you are looking for will be plugged into the insert. I have…

To verify if your 2021 Ford E-450 cutaway chassis for your Class C motorhome is pre-wired for a brake controller you will need to remove the storage slot in the top of your dash. I have included a install video below that shows how to remove the…

There are no exhaust styles that the Curt Hitch part #C15572 that you referenced is not confirmed to fit. That means it would be totally compatible with your 2014 Ram 1500 with dual exhaust as long as you don't have the factory hitch.

All of the hitches offered for your 2012 Ram 1500 are for the versions of the truck without a factory hitch. All of these hitches, shown on the linked page, require you to remove the factory hitch. The available options include 2-inch hitches in…

Since your 2024 Telluride X-Line is not an LS or S model the correct wiring harness is the Curt #C29ZV. This will plug into the connection points in the rear cargo area and provide you with a 4-way to power your trailer's signal lights. The…