Adapts your Demco tow bar so you can use it with a Blue Ox base plate. Also works as a direct replacement for the brackets of the Demco Excali-Bar III tow bar.
Replace the round spacer nut on the arm of your Roadmaster Nighthawk or Sterling tow bar that lets you use the adapter (RM-031-5) for Blue Ox base plates.Features: Replaces the nut from the adapter (RM-031-5) that lets you use your Roadmaster Nighthawk or Sterling tow bar with Blue Ox base plates Quantity: 1 round spacer nut Note: Color may vary.
To attach your Reese tow bar to the Demco Classic Base Plate Kit #DM9518010 you were looking at you would need the an adapter #DM9523015. You'll remove the connectors from your tow bar (pictured below) and install the adapters in their place. The…
I sure can! The Lippert 1716 Pin Box #LC1324791 you were looking at measures 36.4" long and 14" tall as shown in the included diagram provided by Lippert.
Hey Josh, congrats on the new Jeep. Installing a baseplate like the etrailer item #e44FV on your 2026 Jeep Wrangler Willys is going to require you removing the skid plate. This is why our etrailer item #e44FV comes with the diamond plated skid plate…
Over time the AutowLock buttons of the Roadmaster Falcon 2 Tow Bar #RM-520 can wear out and need to be replaced. The good news is that we carry a repair kit for this to get it back to normal. For that you would need the part #RM-910003-60.
If that aftermarket bumper is a Warn Rock Crawler number 74255 then yes, there are some base plates that will fit! Or if it is a Warn/Mopar bumper, part numbers 82211715, 82211715AB or 82209740AD & skid plate part numbers 82210401 or 82210401AB…
The BrakeBuddy Towed Vehicle Battery Charge Kit part #BB54FR comes with a the Brake Buddy Select 3 Portable Supplemental Braking System part #HM39524. I have attached a wiring diagram of how this is setup with the Brake Buddy.
I took a look at the online owner's manual for your 2014 GMC Acadia. It states if the vehicle is either front-wheel drive or all-wheel drive, it can be flat towed with all 4 wheels on the ground. I just recommend verifying this information in…
The parts needed to flat tow your 2018 Ram 1500 will depend on what model you have; we will start with the Big Horn, Laramie/Laramie Longhorn, Limited, or Tradesman 4WD. For these models I recommend the Roadmaster EZ5 Base Plate Kit #RM-52289-5. For…
We do carry the adapters you are looking for so you can tow your Jeep with the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar #RM-422. The part you need is the Adapter for Extended D-Ring Bumper Mounts to Roadmaster Motorhome Mounted Tow…
The difference between the #RM-4700 and the #RM-4750 is being able to use them with your base plates. If you have the crossbar on your base plates you will need part #RM-4700. The RM-4750 is not compatible with other style base plates. Since you said…
For the part number 35043100 it appears you are looking for the Replacement Hardware Kit for Roadmaster Base Plate Kit, #RM-521433-1HK. Part numbers C001588 and C001589 are the removeable arms on the Roadmaster EZ Base Plate Kit, #521433-1. To…
Converts Roadmaster base plate brackets to fit Draw-Tite, Reese, Valley, EAZ-Lift, and Tow Ready tow bars. Also replaces the full-length crossbar that came standard with your Roadmaster Tracker tow bar.Features: Converts Roadmaster base plate brackets to fit select tow bars: Draw-Tite (2480), Reese (74950), Valley, EAZ-Lift, and Tow Ready (63180) Replaces the full-length crossbar of your Roadmaster Tracker tow bar (RM-020) Includes mounting hardware Limited lifetime warranty Note: If you plan to use removable Roadmaster brackets (XL or EZ), you'll need to add Quick-Disconnects (RM-201 - sold separately). This adapter will not fit Roadmaster direct-connect (EZ5, MX, or MS Series) brackets.
Adapts your Roadmaster Sterling, Sterling All-Terrain, or Nighthawk tow bar so you can use it with an etrailer Classic base plate.Features: Lets you use select Roadmaster tow bars with etrailer Classic base plates Nighthawk Sterling All-Terrain Sterling with serial numbers above 14,501 For serial numbers below and including 14,500, use e98983 Includes 2 clevis-style adapters and hardware Made in the USA
Adapts your etrailer tow bar so you can use it with a Duncan base plate.Features: Lets you use your etrailer SD (e24ZR) or XHD (e57ZR) tow bar with Duncan base plates Includes 2 adapters and hardware Pairs with clevis ends originally included with your tow bar etrailer SD replacement clevis end kit e22VR (sold separately) etrailer XHD replacement clevis end kit e54ZR (sold separately)
Adapts your Roadmaster BlackHawk 2 All-Terrain, Falcon 3HD, Nighthawk, or Sterling tow bar so you can use it with a Blue Ox base plate. Check tow bar serial number for compatibility.
... Secure your Blue Ox tow bar to your Blue Ox base plate, the hitch receiver, and high-low adapter with these four steel locks. The snap-on covers keep the locks free of dirt. Keyed alike.Features: Secures your tow bar to the base plate, hitch receiver, and high-low adapter to prevent theft and accidental disconnect Replaces original pins Blocks out dirt and moisture with snap-on covers Constructed of forged and machined hardened steel Chrome finish resists rust and corrosion Includes 2 base plate locks, 2 receiver locks, and 8 keys Keyed alike Made in the USA Specs: Fits Blue Ox tow bars and base plates Base-plate lock body diameter: 1/2" Total length: 5-13/16" Inner length: 2-11/16" Receiver lock body diameter: 5/8" Total length: 5-13/16" Inner length: 2-11/16" 1-Year warranty
Adapts your Roadmaster BlackHawk, Falcon, Falcon 2, Falcon All-Terrain, or select Sterling tow bar so you can use it with a Blue Ox base plate.Features: Lets you use select Roadmaster tow bars with Blue Ox base plates BlackHawk All-Terrain with serial numbers up to 16,500 Falcon Falcon 2 Falcon All-Terrain Sterling with serial numbers up to 14,500 For serial numbers above 14,500, use RM-031-5 Made in the USA Limited lifetime warranty Note: Does not work with Roadmaster Falcon 3HD tow bar. Use adapters RM-031-5 instead.
Use your Roadmaster tow bar to tow your off-road vehicle behind your motor home with these adapter brackets. They attach to the 1" thick shackle mounts on your bumper. Designed with extra clearance for extended D-ring mounts.The adapter pins include sleeves that allow them to fit in both 7/8" and 1" diameter holes.
Adapts your Roadmaster BlackHawk, BlackHawk All-Terrain, Falcon 2, Falcon All-Terrain, Sterling, or Tracker tow bar so you can use it with a Demco Classic base plate.
Adapts your etrailer Invisible base plate so you can use it with your Demco Kwik-Tow or Blue Ox Adventurer tow bar.Features: Lets you use your Demco Kwik-Tow or Blue Ox Adventurer tow bar with etrailer invisible base plates Includes 2 clevis-style adapters and hardware Made in the USA
Adapts your Roadmaster base plate so you can use it with select models of Blue Ox and Demco tow bars.Features: Lets you use your Roadmaster base plate with select Blue Ox and Demco tow bars Blue Ox Aventa, Aventa II, Aventa LX, Alpha, Ambassador, Kar Bar, Aladdin, Alexxa, and Acclaim Blue Ox A-Frame tow bars with 1- or 3-pronged attachments Demco Aluminator, Commander, Dominator, Excali-Bar, and Kwik-Tow Does not fit Roadmaster direct-connect (EZ5, MX, and MS series) base plates Bolts directly to the mounting bracket Measures 28-1/2" between mounting holes center to center on back of adapter Limited lifetime warranty
Use your Roadmaster tow bar to tow your off-road vehicle behind your motor home with these adapter brackets. They attach to the 1" thick shackle mounts on your bumper where the D-rings are attached.These adapters fit shackle mounts that are 1" thick. They attach to the mounts using the holes where the D-rings are mounted. The adapter pins include sleeves that allow them to fit in both 7/8" and 1" diameter holes.
Filters
