bing tracking image

banner image
Written by: Jacob J
Last Updated: 3/11/2025
Estimated read time: 5 mins.

Can I Flat tow The 2024 Ram 1500?

Yes! But only certain configurations. Per the owner's manual, two-wheel drive Rams cannot be flat towed without causing significant damage to the transmission. You can dolly tow a two-wheel drive vehicle by lifting the rear wheels off the ground, and that procedure is laid out in the owner's manual, but here we are going to focus on flat towing specifically. In order to flat tow your 2024 Ram 1500, you will need a few things. Fortunately, we have all the tools and knowledge you need to get started, which you can find by clicking the buttons below!Now that you have all your supplies, it's important to follow the steps in order to make sure your vehicle is properly set up to tow. Without further ado, lets get started:Getting your vehicle ready to tow
  • Park the vehicle behind your RV on even and level ground with the engine running, and apply the parking brake
  • Shift the transmission into N (Neutral)Pro Tip: The driver's side door must be closed (or the driver's seat belt buckled) in order for the transmission to remain in N (Neutral) when the brake pedal is released
  • If your vehicle is equipped with air suspension, ensure your vehicle is set to normal ride height
  • Using a ballpoint pen or similar object, press and hold the recessed N (Neutral) button. The N (Neutral) indicator will light up and stay lit consistently when the shift is complete. When the shift is complete you may release the N (Neutral) buttonPro Tip: Hold onto that pen, you'll need it to disconnect your vehicle once you get to the campsite
  • Release the parking brake, shift your transmission into R (Reverse), and confirm that there is no movement after 5 seconds. Repeat by shifting your vehicle into D (Drive) and monitoring for movementNote: If your vehicle is stationary despite being in D (Drive) or R (Reverse), then your transfer case is in true neutral and you can move on to the next steps. If not, then your transfer case has not shifted into N (Neutral) and you should start these steps over again
  • Shift your transmission into N (Neutral) and re-apply the parking brake
  • You may now turn off your engine, for vehicles with keyless ignition press and hold the "ENGINE START/STOP" button until the engine shuts offPro Tip:The transmission will automatically display P (Park) when you turn the engine off, this is completely normal
  • Attach your vehicle to your RV using the tow bars
  • Turn your engine into ON/RUN mode, but do not start the engine
  • Release the parking brake, and turn the ignition off. You're now ready to flat tow!
If your vehicle has air suspension, the engine should be started and left running for 1-2 minutes at least every 24 hours. This helps the air suspension adjust ride height to compensate for temperature differences. Other than that, you're good to drive until you get to your destination! Thankfully, getting your vehicle ready to drive is an extremely simple process. Let's go over that now: Getting your vehicle ready to drive
  • Bring your vehicle to a complete stop on an even and level surface
  • Press and hold the brake pedal (keep it held for the next few steps)
  • Start the engine, apply the parking brake, and shift your transmission into N (Neutral)
  • Using a ballpoint pen or similar object (see I told you you'd need it again), press and hold the recessed N (Neutral) button to shift your transfer case back to normal operationNote: When the N (Neutral) light turns off, the shift is complete and you can release the recessed N (Neutral) button
  • Turn the engine off, the transmission will automatically display P (Park). Again this is completely normal
  • You may now release the brake pedal, afterward disconnect your vehicle from your RV
  • Press and hold the brake pedal and start your engine
  • Release the parking brake and confirm that your vehicle is functioning normally by shifting into D (Drive) or R (Reverse) and checking for the expected movementNote: If your vehicle is not operating normally, then the shift back to normal usage is incomplete and you should start these steps over from the beginning. However, if it is operating normally, then congratulations! You can now say you've attached and detached your vehicle to your RV!
We hope this information helps you (and your Ram 1500) get out there and have your next adventure! Make sure to browse our fitguide for baseplates designed to fit your vehicle. Just enter your year, make, and model and we will point you in the right direction! Be safe and happy towing!